Transcription of Soft token activation - User Guide - WHO
1 soft token activation User Guide . We advise you to perform activation of Software token in the office, when you have access to your personal computer and mobile phone. 1. Install Google Authenticator on your mobile phone. If your mobile phone cannot run Google Authenticator please contact WHO Global Service Desk for advice. 2. If you have laptop or computer to access your WHO email, proceed to step 3 below. If you have only mobile phone to read your WHO email, proceed to step 6 below. 3. On your laptop or desktop open email message from Open Systems Mission Control with subject Your software token activation request and click activation link to open activation page: 4. On your mobile phone start Google Authenticator click Begin Setup button, then Scan Barcode and point phone camera to your computer screen to capture QR code. Once QR code is read, software will display 6- diggit code. 5. On your laptop or desktop enter 6-digit code displayed on your mobile device to Activate filed, than press Activate button.
2 The process is complete if message Your software token has been activated successfully.. 6. On your mobile phone, open WHO email inbox and open email message from Open Systems Mission Control with subject Your software token activation request , then click the WEB link in this message to open token activation page. 7. On the WEB page, click on show link next to Key , then highlight key text and copy it to the buffer: 8. Launch Google Authenticator; click Begin Setup , then Manual Entry . Enter description in Account filed and paste text string copied in step 4 to Key filed. Press Done button. 9. On the displayed screen, touch 6-digit number to have it copied to the buffer. Return to WEB activation page and paste 6-digit number to token field, then press Go button. If token activation is successful you will receive message Your software token has been activated successfully.
