Example: marketing
Specifications - house-n-home-building.com
Walls shall be 8” thick by 7 ½ feet high, with anchor bolts or ties 1” from all corners and spaced 6’ O.C. Asphalt foundation coatings shall be applied to exterior from footings to finish grade line. B. All basement and garage walls shall be poured concrete, as per plan. C. Any porch frost walls shall be poured concrete, as per plan.
Tags:
Information
Domain:
Source:
Link to this page:
Related documents
Chapter 10 CONSTRUCTION METHOD FOR LIGHT GAUGE …
bca.gov.sgWire brick ties which simply clip on to steel studs are available for brick veneer construction. For single wall construction fibre cement sheeting can be fixed to steel frames with self-drilling, self-embedding head screws. Timber weatherboards can be
GOOD SITE PRACTICE AND WORKMANSHIP - Brick
www.brick.org.ukas lintels, ties and cavity trays must be designed and specified in accordance with all relevant codes ... Brick manufacturers have a vested interest in the achievement of successful brickwork and are able to help and offer advice on all aspects of workmanship and site practice.
0331 Brick and block construction - NATSPEC
www.natspec.com.auEmbedded items: Build in wall ties and accessories as the construction proceeds. If it is not practicable to obtain the required embedment wholly in the mortar joint in hollow masonry units, fill appropriate cores with grout or mortar. Clearance for timber frame shrinkage
ASTM C90, Standard Specification for Load-Bearing Concrete ...
www.uop.edu.joties must be covered separately in the project specifications. Sampling and testing are referenced to ASTM C140, and standards for aggregates and cements are also referenced, so the specifier need not list these separately. 17.5.3 Standards for Masonry Mortar and Grout ASTM C270, Standard Specification for Mortar for Unit Masonry.
1 RCNY §103-04
www1.nyc.gov1. When a repair campaign addressing cavity wall ties has been completed within ten (10) years of the filing deadline and the owner or QEWI provides proof of such repair including, but not limited to, photographs, special inspection reports, and construction documents, which must be submitted and found acceptable by the Department. 2.