Transcription of Spray Nozzles - Lincoln Industrial
1 8 Spray_Leer_spanisch 10:14 Uhr Seite 8(15-250 VAC)(15-250 VAC) 20 cm3150 200 mmapprox. 200 Nl/minmax. 40 Nl/minmax. 200 barmax. 120 barHSA-TD25, 26, 27 HSA-TD2, 28, 29, 3050 mm ( in)87 mm ( in)20 mm ( in)110 mm ( in)140 mm ( in)45 mm ( in)110 mm ( in)185 mm ( in)45 mm ( in)110 mm ( in)140 mm ( in)45 mm ( in) Spray NozzlesLincoln Spray Nozzles aredesigned for the spraying ofadhesive lubricants on pinions andopen gears. The Nozzles areavailable in several versions thatcover a wide range of applicationsand functional features. TheSDLKR series are the onlynozzles that can monitor both theflow of air and lubricant within thenozzle. The economically pricedSD series can be monitoredexternally by means of aprogressive metering device andthe air can be controlled withan air solenoid valve. Complete mounting plates are available for easy Selection Guide & Part NumbersMounting StylUncontrolled NozzleControlled NozzlesWithout Monitoringwith MonitoringLimit SwitchProximity SwitchTechnical Datalubricant output( in ) per minutespray surface coverageapprox.
2 150 mm ( in) wide and 80 mm ( in) high mounting distance(6 8 in) from nozzle to application pointair pressureuncontrolled nozzle : 3 bar (43 psi), controlled nozzle : 6 bar (87 psi) air requirement(free air) for uncontrolled nozzle (free air) for controlled nozzleoperating(2900 psi) for uncontrolled nozzle (1740 psi) for controlled nozzle pressureconnectionsair:lubricant:gG 1/4 female (BSPP)G 1/4 female (BSPP)connectionsair:lubricant:8 mm tubing or hose stud6 mm tubing or hose mm : Air inlet is marked as "L and lubricant inlet is marked as "S .Tightening torque for controlled Nozzles = 20 Nm, electric monitoring signal = 20 SDnozzle SDLMKR-ENnozzle SDLMKR-ESnozzle SDLMNR mounting platesinglemounted nozzle (for brackets)HSA-TD26 HSA-TD2part no. 615-25677-2part no. 615-27519-2part no. 615-27518-2part no. 615-27571-2part no. 615-25677-2part no. 615-27583-2part no.
3 615-27585-2part no. 615-27586-23fastening:M 12
