Example: tourism industry
Surface-Mount ESD Protection Diodes
ESD immunity Contact discharge acc. IEC 61000-4-2; 10 pulses VESD ± 30 kV Air discharge acc. IEC 61000-4-2; 10 pulses ± 30 kV Thermal resistance Mounted on epoxy glass PCB with 3 mm x 3 mm, Cu pads ( ≥ 40 μm thick) RthJA 180 K/W Forward clamping voltage IF = 50A, tp = 400 μs VF 2.5 V Junction temperature TJ 175 °C
Information
Domain:
Source:
Link to this page:
Documents from same domain
How to Select the Right MOSFET for Power Factor …
www.vishay.comVISHAY SILICONIX Power MOSFETs Application Note - AN844 How to Select the Right MOSFET for Power Factor Correction Applications APPLICATION NOTE Revision: 03-Jun-13 1 Document Number: 65677
Automotive P-Channel 60 V (D-S) 175 °C MOSFET
www.vishay.comSQ7415AEN www.vishay.com Vishay Siliconix S13-1891, Rev. C, 26-Aug-13 1 Document Number: 67042 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Transient Voltage Suppressors (TVS) for …
www.vishay.comTransient Voltage Suppressors (TVS) for Automotive Electronic Protection www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88490
Power Metal Strip Resistors, Low Value (down to …
www.vishay.comWSR High Power www.vishay.com Vishay Dale Revision: 11-Jul-2018 1 Document Number: 31059 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Resistive Products Power Dissipation in High …
www.vishay.comDocument Number: 53048 www.vishay.com Revision: 29-Oct-09 1 VISHAY SFERNICE Resistive Products Application Note Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays
Vishay Semiconductors
www.vishay.comVCUT0505B-HD1 www.vishay.com Vishay Semiconductors Rev. 2.2, 16-May-17 1 Document Number: 81852 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
RF PIN Diodes - Single in DO-35 (DO-204AH) - Vishay
www.vishay.comLegal Disclaimer Notice www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
Small Signal Switching Diodes, High Voltage
www.vishay.comBAV17, BAV18, BAV19, BAV20, BAV21 www.vishay.com Vishay Semiconductors Rev. 1.9, 12-Jul-17 3 Document Number: 85543 For technical questions within your region ...
High Precision Wraparound - Wide Ohmic Value …
www.vishay.comP www.vishay.com Vishay Sfernice Revision: 23-Feb-18 1 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Aluminum Electrolytic Capacitors Radial Standard …
www.vishay.com038 RSU www.vishay.com Vishay BCcomponents Revision: 28-Feb-17 1 Document Number: 28309 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Related documents
PESD1CAN-U CAN bus ESD protection diode
assets.nexperia.comESD TESTER IEC 61000-4-2 network Cs = 150 pF; Rd = 330 Ω 4 GHz DIGITAL OSCILLOSCOPE 10x ATTENUATOR unclamped +8 kV ESD pulse waveform (IEC 61000-4-2 network) unclamped -8 kV ESD pulse waveform (IEC 61000-4-2 network) GND clamped +8 kV ESD pulse waveform (IEC 61000-4-2 network) aaa-007017 GND clamped -8 kV ESD pulse waveform (IEC 61000-4-2 network)
PESD1CAN CAN bus ESD protection diode
assets.nexperia.comESD clamping test setup and waveforms 006aaa259 50 Ω RZ CZ D.U.T. (Device Under Test) vertical scale = 200 V/div horizontal scale = 50 ns/div unclamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) unclamped −1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped −1 kV ESD ...
Description Pin Assignments - Diodes Incorporated
www.diodes.comESD HBM Human Body Model ESD Protection 2 KV ESD CDM Charged Device Model ESD Protection 1 KV ESD MM Machine Model ESD Protection 200 V V. CC (A), V. CC (B) Supply Voltage Range -0.5 to +6.5 V V. I. Input Voltage Range -0.5 to +6.5 . V : V. O. Voltage Applied to Output in High Impedance or I.
IP4220CZ6 Dual USB 2.0 integrated ESD protection
assets.nexperia.comElectroStatic Discharge (ESD). It incorporates four pairs of ultra low capacitance rail-to-rail ESD protection diodes plus a Zener diode to provide protection to signal and supply components from ESD voltages up to 8 kV contact discharge. Protection is supply voltage independent due to the rail-to-rail diodes being connected to the Zener diode.
EdgeRouter X Datasheet
dl.ubnt.comESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV Operating Temperature -10 to 45° C (14 to 113° F) Operating Humidity 10 to 90% Noncondensing Networking Interfaces Data/PoE Output Port (5) 10/100/1000 RJ45 Ports Data Port (1) 100/1000 SFP Port PoE with 24VDC Power Adapter PoE Out Voltage Range 22‑24VDC Max. PoE Wattage Per Data/PoE ...
UniFi PoE Switch Datasheet
dl.ubnt.comESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 40° C (23 to 104° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC
ESDサプレッサ EZAEG タイプ - Panasonic
industrial.panasonic.comピーク電圧 500 V 以下 IEC61000-4-2、接触放電8 kV、ピーク電圧値 ... ④ Gbpsレベルの高速差動信号回路やGHz以上高周波回路のESD対策に適した部品のため、電源回路のESD対策でのご使 …
ESDサプレッサ EZAEG タイプ EZAEG 1N, 2N シリーズ
industrial.panasonic.comesd耐量が大きい (iec61000-4-2, 15 kv接触／気中放電) 高速伝送ラインのesd対策部品に適している 静電容量が低い (1005サイズ：0.05 pf、 0603サイズ：0.04 pf)
FSA2567 - Low-Power, Dual SIM Card Analog Switch
www.onsemi.comESD Human Body Model, JEDEC: JESD22−A114 All Pins − 3 kV I/O to GND − 12 Charged Device Model, JEDEC: JESD22−C101 − 2 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1.
SRV05-4 ESD Protection Diode Array - ON Semiconductor
www.onsemi.comfor ESD Devices. ESD Voltage Clamping For sensitive circuit elements it is important to limit the voltage that an IC will be exposed to during an ESD event to as low a voltage as possible. The ESD clamping voltage is the voltage drop across the ESD protection diode during an ESD event per the IEC61000−4−2 waveform. Since the