Example: air traffic controller

sw930 Safety Data Sheet - Sprayway, Inc

Safety data Sheet . 1. Identification Product number 1000010097. Product identifier SW758 INDUSTRIAL DE-ICER. Company information Sprayway, Inc. 1000 INTEGRAM DR. Pacific, MO 63069 United States Company phone 1-630-628-3000. Emergency telephone US 1-866-836-8855. Emergency telephone outside 1-952-852-4646. US. Version # 01. Recommended use De-Icer Recommended restrictions None known. 2. Hazard(s) identification Physical hazards Flammable aerosols Category 1. Health hazards Acute toxicity, oral Category 3. Acute toxicity, dermal Category 3. Acute toxicity, inhalation Category 3. Serious eye damage/eye irritation Category 2. Specific target organ toxicity, single exposure Category 1. OSHA defined hazards Not classified. Label elements Signal word Danger Hazard statement Extremely flammable aerosol.

Product name: SW758 INDUSTRIAL DE-ICER Product #: 1000010097 Version #: 01 Issue date: 06-12-2018

Tags:

  Sheet, Data, Safety, Safety data sheet

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of sw930 Safety Data Sheet - Sprayway, Inc

1 Safety data Sheet . 1. Identification Product number 1000010097. Product identifier SW758 INDUSTRIAL DE-ICER. Company information Sprayway, Inc. 1000 INTEGRAM DR. Pacific, MO 63069 United States Company phone 1-630-628-3000. Emergency telephone US 1-866-836-8855. Emergency telephone outside 1-952-852-4646. US. Version # 01. Recommended use De-Icer Recommended restrictions None known. 2. Hazard(s) identification Physical hazards Flammable aerosols Category 1. Health hazards Acute toxicity, oral Category 3. Acute toxicity, dermal Category 3. Acute toxicity, inhalation Category 3. Serious eye damage/eye irritation Category 2. Specific target organ toxicity, single exposure Category 1. OSHA defined hazards Not classified. Label elements Signal word Danger Hazard statement Extremely flammable aerosol.

2 Toxic if swallowed. Toxic in contact with skin. Causes serious eye irritation. Toxic if inhaled. Causes damage to organs. Precautionary statement Prevention Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do not breathe gas. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear eye protection/face protection. Wear protective gloves/protective clothing. Response If swallowed: Immediately call a poison center/doctor. Rinse mouth. If on skin: Wash with plenty of water. If inhaled: Remove person to fresh air and keep comfortable for breathing.

3 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a poison center/doctor. If eye irritation persists: Get medical advice/attention. Take off immediately all contaminated clothing and wash it before reuse. Storage Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F. Disposal Dispose of waste and residues in accordance with local authority requirements. Hazard(s) not otherwise None known. classified (HNOC). Supplemental information None. 3. Composition/information on ingredients Mixtures Product name: SW758 INDUSTRIAL DE-ICER SDS US. Product #: 1000010097 Version #: 01 Issue date: 06-12-2018 1 / 11.

4 Chemical name Common name and synonyms CAS number %. Methanol 67-56-1 60 - 80. Ethylene Glycol 107-21-1 - 10. Isopropyl Alcohol 67-63-0 - 10. Carbon Dioxide 124-38-9 1 - Propane 74-98-6 1 - Diethylene Glycol n-Butyl Ether 111-46-6 - 1. Other components below reportable levels 10 - 20. *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Inhalation Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or artificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.

5 Call a POISON CENTER or doctor/physician. Skin contact Take off immediately all contaminated clothing. Wash off with soap and water. Get medical advice/attention if you feel unwell. Get medical attention if irritation develops and persists. Wash contaminated clothing before reuse. Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Ingestion Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting without advice from poison control center. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Do not use mouth-to-mouth method if victim ingested the substance.

6 Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Most important Headache. Dizziness. Nausea, vomiting. Severe eye irritation. Symptoms may include stinging, symptoms/effects, acute and tearing, redness, swelling, and blurred vision. delayed Indication of immediate Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim medical attention and special under observation. Symptoms may be delayed. treatment needed General information Take off immediately all contaminated clothing. If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.

7 Show this Safety data Sheet to the doctor in attendance. 5. Fire-fighting measures Suitable extinguishing media Alcohol resistant foam. Powder. Carbon dioxide (CO2). Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire. media Specific hazards arising from Contents under pressure. Pressurized container may explode when exposed to heat or flame. the chemical During fire, gases hazardous to health may be formed. Special protective equipment Firefighters must use standard protective equipment including flame retardant coat, helmet with and precautions for firefighters face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Fire fighting Move containers from fire area if you can do so without risk.

8 Containers should be cooled with equipment/instructions water to prevent vapor pressure build up. For massive fire in cargo area, use unmanned hose holder or monitor nozzles, if possible. If not, withdraw and let fire burn out. Specific methods Use standard firefighting procedures and consider the hazards of other involved materials. Move containers from fire area if you can do so without risk. In the event of fire and/or explosion do not breathe fumes. General fire hazards Extremely flammable aerosol. 6. Accidental release measures Personal precautions, Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear protective equipment and appropriate protective equipment and clothing during clean-up. Do not breathe gas.

9 Do not touch emergency procedures damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Product name: SW758 INDUSTRIAL DE-ICER SDS US. Product #: 1000010097 Version #: 01 Issue date: 06-12-2018 2 / 11. Methods and materials for Refer to attached Safety data sheets and/or instructions for use. Stop leak if you can do so without containment and cleaning up risk. Move the cylinder to a safe and open area if the leak is irreparable. Isolate area until gas has dispersed. Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area).

10 Keep combustibles (wood, paper, oil, etc.) away from spilled material. Cover with plastic Sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material ( cloth, fleece). Clean surface thoroughly to remove residual contamination. For waste disposal, see section 13 of the SDS. Environmental precautions Avoid discharge into drains, water courses or onto the ground. 7. Handling and storage Precautions for safe handling Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missing or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke while using or until sprayed surface is thoroughly dry.


Related search queries