Example: confidence
To be the Chief Evangelist Ender-5 Pro Printer
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from machine while in use to avoid burns or personal injury. 7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer ...
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
BIGTREETECH SKR 2 - cdn-3d.niceshops.com
cdn-3d.niceshops.com10A. If you want to use a high-power hot bed, it is recommended to choose a hot bed with 24V power supply and use 24V to power the main board; 3. The jumpers that allow selection between SPI WiFi (for RRF) or U disk functionality should be inserted to select at least one option.;
BLTouch: Auto Bed Leveling Sensor for 3D Printers
cdn-3d.niceshops.comWhen each EEPROM command (S130, S140, S150) is completed, the 10ms red LED is turned on once or twice. The last command for mode conversion (S140 or S150) will be activated immediately and the 10ms red LED flashes two times. Please don't mix up the sequence. If the correct order and minimum retention time are not observed, a retry may be required.