Type 1098-63EGR - Emerson

1 Type 1098-63 EGRThe Type 1098-63 EGR separator regulator provides fast, accurate and reliable pressure control for gas leg backpressure applications. A simple and durable design is utilized to withstand dirt and debris common in many separator applications without sticking and without compromising shut-off performance. The primary application for this regulator is backpressure control on the gas leg of three phase advantages: In line maintenance ANSI/FCI 70-3-2004 Class VI Shutoff Large Flow Fast ResponseSpecifications:Working Pressure/Spring Range: 3 to 82 psig / to barSizes: 1 through 6-inch NPT, CL125 FF, CL250 FFTemperature: -20 to 300 F / -29 to 149 CCv: Up to 566 Body Material: Cast IronDiaphragm and Seals: Nitrile (NBR), Fluorocarbon (FKM)Trim: Stainless steel with Nitrile (NBR) plug or Fluorocarbon (FKM) plugDownstream Control Line Connection Size: 1/4 NPTType 1098-63 EGRS eparator backpressure 1098-63 EGRCOMMON DIMENSIONS, In.

2 / mmDIMENSION SPECIFIC FOR TYPE 1098-63 EGR, In. / mmBODYSIZE, NPS / DNAE (Without Travel Indicator)VNPTCast IronSteel/Stainless SteelARCL125 FFCL250 RFCL150 RFCL300 RFCL600 RF1 / / / / / / / / / / / / 28610 / / 26710 / / / / / / / 80- - - / / / / / / / / / 100- - - / / / / / / / / 1306 / 150- - - / / / / 47320 / / 13220 / / 1628 x 6 / 200 x 150- - - -- - - -- - - / / 56824 / / / / MAX / 108 TRAVEL INDICATORCOVER /333 ACTUATORREMOVALCLEARANCEVVALVE TRIMREMOVALCLEARANCEAA/2 OPTIONAL TRAVELINDICATORUSA - HeadquartersMcKinney, Texas 75070 USA Tel: 1-800-558-5853 Outside 1-972-548-3574 The One Stop For Your Complete Oil and Gas Regulating Process Management Regulator Technologies, 2015 Emerson Process Management Regulator Technologies, Inc.

3 All rights reserved. Printed in the 05 , Emerson Process Management, and the Emerson Process Management design are marks of one of the Emerson Process Management group of companies. All other marks are the property of their respective , China 201206 Tel: +86 21 2892 9000 EuropeBologna, Italy 40013 Tel: +39 051 SeriesBody 1/4, 1/2, 3/4, 1, 1-1/2 and 2 Outlet Pressure 2 to 400 psig ../ to barMaximum Inlet psig / barOperation Iron, Steel, ..Stainless Steel, Hastelloy C and Monel Bulletin No.. 63EG-98 HMBody 2, 3, 4, 6 and 8 x 6 Relief Pressure to 375 to barMaximum Inlet psig / barOperation , Stainless Steel, ..Hastelloy C, Monel and Alloy 20 Bulletin No.. SeriesBody 1/4, 1/2, 3/4, 1, 1-1/2 and 2 Relief Pressure to 375 to barMaximum Inlet psig / barOperation Iron, Steel.

4 Stainless Steel, Hastelloy C and Monel Bulletin No.. : MR98 BackpressurePressure ReducingMiddle East and AfricaDubai, United Arab EmiratesTel: +971 4811 MR105 Body 1, 2, 3 and 4 Outlet Pressure to 300 psig ../ to bar(2)Maximum Inlet psig / bar Operation Iron, Steel and ..Stainless SteelBulletin No.. MR108 Body 1, 2, 3 and 4 Control Pressure to 300 psig ../ to bar(2)Maximum Inlet psig ../ bar(1)Operation Iron, Steel and ..Stainless SteelBulletin No.. :MR108 Fisher pressure reducing and backpressure regulators area available in a wide range of sizes and contructions to satisfy your application For high-pressure actuator constructions with Fluorocarbon (FKM) diaphragm, maximum outlet and emergency casing pressures are limited to 230 psig / bar or the body rating limit, whichever is For high-pressure actuator constructions with Fluorocarbon (FKM) diaphragm, maximum set pressure is limited to 150 psig / 10 is a mark owned by Special Metals C is a mark owned by Haynes International, Inc.