User’s Guide - JBL Professional

1 PRX612 MPRX615 MPRX625 PRX635 PRX618 SPRX618S-XLFUser s 2/4/11 11:13 AM Page 2/4/11 11:13 AM Page 23 Important Safety Instructions4 Precautions5 Suspension of Loudspeaker Systems6 - 7 Watch for These Symbols8 PRX600 Series Speakers Declaration of Conformity9 The PRX600 Series Power Amplifier10 Introduction To The PRX600 Series 11 - 12 System Specifications 13 - 18 System Setup 19 - 22 Setting Input Sensitivity23 Setting The Gain24 Application Examples25 - 28 Reference29 Cables and Connectors30 Troubleshooting31 - 32 Contact Information33 Warranty 2/4/11 11:13 AM Page 341.

2 Read these Keep these Heed all Follow all Do not use this apparatus near Clean only with dry Do not block any ventilation openings. Install in accordance with the manufacturer s Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includingamplifiers) that produce Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two bladeswith one wider than the other. A grounding-type plug has two blades and a third grounding prong.

3 The wideblade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consultan electrician for replacement of the obsolete Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the Only use attachments/accessories specified by the Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from Unplug this apparatus during lightning storms or when unused for long periods of Refer all servicing to qualified service personnel.

4 Servicing is required when the apparatus has beendamaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects havefallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, orhas been If Service Instructions are included in the Owner's manual : "CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISKOF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THEOPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

5 " 16. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. 18. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such asvases, are placed on the The main plug of the power supply cord shall remain readily And CleaningPRX600 series systems may be cleaned with a dry cloth. Do not get moisture into any of the openings in thesystem.

6 Ensure that the system is unplugged from the AC outlet before cleaning. In the event the DuraFlex finishis damaged a touch up kit can be obtained from JBL Professional (part number 363972-001).THIS APPARATUS CONTAINS POTENTIALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC SHOCK ORHAZARD, DO NOT REMOVE CHASSIS, INPUT MODULE OR AC INPUT COVERS. NO user SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE SAFETY 2/4/11 11:13 AM Page 45 The PRX600 series speakers covered by this manual are not intended for use in highmoisture environments.

7 Moisture can damage the speaker cone and surround and causecorrosion of electrical contacts and metal parts. Avoid exposing the speakers to directmoisture. Keep speakers out of extended or intense direct sunlight. The driver suspension willprematurely dry out and finished surfaces may be degraded by long-term exposure to intenseultra-violet (UV) light. PRX600 series speakers can generate considerable energy. Whenplaced on a slippery surface such as polished wood or linoleum, the speaker may move due to its acousticalenergy output.

8 Precautions should be taken to assure that the speaker does not fall off a stage or table on whichit is Mounting Safety PrecautionsSome PRX600 series models include a 36 mm receptacle cup to allow mounting on tripod stands or on a poleover subwoofers. When using stands or poles, be sure to observe the following precautions: Check the stand or pole specification to be certain the device is designed to support the weight of thespeaker. Observe all safety precautions specified by the manufacturer. Always verify that the stand (or subwoofer/pole) is placed on a flat, level and stable surface and besure to fully extend the legs of tripod type stands.

9 Position the stand so that the legs do not present atrip hazard. Route cables so that performers, production crew, and audience will not trip and topple the speakers over. Inspect the stand (or pole and associated hardware) before each use and do not use equipment withworn, damaged or missing parts. Do not attempt to place more than one PRX600 series speaker on a stand or pole. Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight ( ) on the base of the stand to improve stability.

10 Avoid attaching banners or similar items to anypart of a speaker system. Such attachments could act as a sail and topple the system. Unless you are confident that you can handle the weight of the speaker, ask another person to helpyou get it onto the tripod stand or pole. The PRX635 should be pole-mounted on a PRX 600 subwoofer using a pole no longer than 24 in length. (SS3-BK24 or SS4-BK24) JBL highly recommends that no more than 70 lbs of weight be placed on a speaker pole that is mounted to a PRX618S or of Loudspeaker SystemBefore attempting to suspend your JBL loudspeakers, read and understand the following safety SAFETY WARNING!