User’s Manual

1 1910012714 REV Wi-Fi Plug HS100 Smart Wi-Fi Plug with Energy Monitoring H S 110 User s ManualCopyright & TrademarksSpecifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co.

2 , Ltd. 2020 TP-Link. All rights 1. Product Main Panel LayoutChapter 2. Quick StartTroubleshootingFrequently Asked s ManualChapter 1. Product OverviewWhat This Product DoesThe Wi-Fi Smart Plugs make it easy to control your lights or household electronic devices anywhere in the world with the TP-Link Kasa Smart app on your smartphones or and Away ModeWith the Schedule and Away Mode feature, you can automate your lights or plugged-in appliances to turn on and off according to specific schedules, to simulate occupancy when you re away from home.

3 In addition, set a countdown timer to automatically turn the connected device on or off after a certain amount of time. Compatible with Amazon EchoYou can pair the Smart Plugs with Amazon Echo for voice with Android, iOSThe free Kasa Smart app lets you run them from any Android ( and higher) or iOS (iOS 10 and higher) Conservation (for HS110 only)You can efficiently conserve energy and save money while using the Smart Plugs to control your space heaters and fans. The Smart Plug tracks your device s power consumption in real-time, and has weekly and monthly Main Features Control devices connected to the Smart Plug wherever you have internet using the free Kasa Smart app on your smartphone.

4 Schedule the Smart Plug to automatically power electronics on and off as needed, like setting lights to come on at dusk or turn off at sunrise. Analyze your plugged-in device s real-time and historical power s Manualconsumption. (for HS110 only) Turn your devices on and off at different times to give the appearance that someone is home. Pair the Smart Plug with the Amazon Echo to control the connected device with your Panel Layout* Image may differ from actual product due to different regional power specifications.

5 Here we use the version as an (Settings Button)/Press this button for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app-config and hold for 10 seconds or until the Wi-Fi LED blinks amber rapidly to factory ButtonWi-Fi LEDP ower s ManualItemStatusDescription (Wi-Fi LED)BlinkAmber and green: App configuring : Connecting to the : Factory : Network connection : : No network connection. (Power LED)OnOffThe Smart Plug is switched Smart Plug is switched Load Types:Coffee Maker: 800 WDesk Lamp: WLCD: 270 WHeater: 1500 WHumidifier: 260 WIron: 1500 WToaster: 850 WTower Fan: 50 s ManualChapter 2.

6 Quick Start1. Download Kasa Smart from Apple App Store or Google Connect your mobile device to a Wi-Fi : The Smart Plug only supports Launch Kasa Smart and follow the app instructions to connect the Smart Plug to your s ManualTroubleshootingFrequently Asked Questions1. What devices can I control with the Smart Plug?You can control lights, electronics and small appliances such as humidifiers, air purifiers, portable heaters and What should I do when I can t control the connected device? Check that the connected device is switched to ON.

7 Make sure your mobile device and the Smart Plug are on the same Wi-Fi network. Enable Remote Control to control the connected device from outside your What should I do when the Wi-Fi LED is lit red?A red LED light indicates no network connection. Check your network connectivity. Relocate the Smart Plug. Avoid placing the Smart Plug near potential sources of radio signal interference. Repeat the app configuring process. Factory reset the Smart Plug and try to add it How do I pair the Smart Plug with Amazon Echo?

8 Visit or within the Kasa Help section for pairing Specifications can be found on the product page at Our Technical Support and troubleshooting information can be found at s ManualFCC compliance information statementProduct Name: Smart Wi-Fi Plug / Smart Wi-Fi Plug with Energy MonitoringModel Number: HS100 / HS110 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, : 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: : +1 626 333 0234 Fax: +1 909 527 6803E-mail: equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

9 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

10 Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful This device must accept any interference received, including interference that may cause undesired changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.