Transcription of Using the Taotronics TT-BS012 Barcode Scanner with …
1 Using the Taotronics TT-BS012 Barcode Scanner with Readerware The Taotronics TT-BS012 Handheld Barcode Scanner is a reliable and easy to use wireless Scanner . No cables are needed just plug the USB receiver into any available USB port on your computer, keyboard, monitor or router. It operates in both real time and batch modes. Use it to catalog books on their shelves, to checkout books at your computer drivers are needed, just plug it in and scan. Works with Windows, Linux and Mac OS configure the Scanner by scanning special barcodes which are included in the manual. For your convenience we are including the configuration barcodes needed to use the Scanner with to your manual for installation time setupThere is a one time setup you need to do to configure your Scanner for use with Readerware.
2 If the Scanner ever has problems, repeat the setup to reset your to factory defaultsEnable UPC-A 5 digit supplementsPage 1 of 3 Using the Taotronics TT-BS012 Barcode Scanner with Readerware Normal modeUse normal mode when scanning directly into Readerware one Barcode at a time. Normal mode is used when scanning at your computer and when you are in wireless scanning modeInventory modeInventory mode is typically used when you are away from your computer and out of wireless range. As you scan a Barcode it is stored in memory. When you return to your computer you can upload the scans into Readerware ModeUploading into Readerware auto-catalogBefore uploading your scans you must ensue that Readerware is ready to accept them.
3 When you are ready to upload your scans, start Readerware auto-catalog. On the ISBN/UPC input page, click on the Upload button. Select Other wedge reader from the Scanner list and ensure the input area has the keyboard focus. Scan this Barcode to send the scans to dataPage 2 of 3 Using the Taotronics TT-BS012 Barcode Scanner with Readerware Clearing data in the scannerUploading the Barcode scans into Readerware does not automatically remove them. Once you are sure you no longer need then, you can erase the scans from the dataPage 3 of 3
