Wirewound, Surface Mount, Molded Inductors - Vishay

1 IMC- 1812 . Vishay Dale wirewound , Surface mount , Molded Inductors FEATURES. Molded construction provides superior strength and moisture resistance Tape and reel packaging for automatic handling, 2000/reel, EIA-481. Printed marking STANDARD ELECTRICAL SPECIFICATIONS Compatible with vapor phase and infrared reflow TEST FREQ. SRF DCR RATED DC soldering IND. (MHz) MIN. MAX. CURRENT. Q Material categorization: for definitions of compliance ( H) TOL. L&Q MIN. (MHz) ( ) (mA) (1). please see 20 % 50 1000 450. 20 % 50 1000 450. 20 % 50 1000 450 ELECTRICAL SPECIFICATIONS. 20 % 50 1000 450. 20 % 50 1000 450 Inductance range: H to 1000 H. 20 % 50 1000 450 Special tolerances available upon request 20 % 50 1000 450. 20 % 50 1000 450 Operating temperature: -55 C to +125 C. 20 % 40 900 450. 20 % 40 800 450 Coilform material: Non-magnetic for H to H . 20 % 40 700 450 Powdered iron for H to 120 H . 20 % 30 650 450 Ferrite for 150 H to 1000 H. 20 % 30 600 450. 20 % 30 500 450. 20 % 30 400 450 TEST EQUIPMENT.

2 20 % 30 350 450. 20 % 30 300 450 H/P 4342A Q meter with Vishay Dale test fixture or 20 % 30 250 430 equivalent 20 % 30 220 380 H/P 4191A RF impedance analyzer (for SRF. 10 % 30 190 355. 10 % 30 170 285 measurements). 10 % 30 150 270 Wheatstone bridge 10 % 30 140 250. 10 % 50 100 450. 10 % 50 430. 10 % 50 410 DIMENSIONS in inches [millimeters]. 10 % 50 390. 10 % 50 380 10 % 50 370 [ ]. 10 % 50 355 [ ]. 10 % 50 330. 10 % 50 315. + 10 % 50 300 10 % 50 285 [ ] [ ] - + 10 % 50 270 Ref. Typ. [ - ]. 10 % 50 250 [ ] Typ. 10 % 50 225. 10 % 50 200 10 % 50 190 [ ]. 10 % 50 180 Typ. 10 % 50 170 10 % 50 160 [ ]. [ ]. 10 % 50 150 Ref. 10 % 50 140 [ ]. 10 % 50 135 Guidelines for (1). 10 % 50 130 Parallel Component [ ]. [ ]. 10 % 50 120 Printed Circuit 10 % 40 110 Mounting Pads on 10 % 40 110 [ ] [ ]. IMC- 1812 Chip 10 % 40 105. 10 % 40 102 Inductors [ ]. 10 % 40 100. 10 % 40 92 Note 10 % 40 85 (2) Recommended minimum spacing between components 10 % 40 80. 10 % 40 62. 10 % 30 50 PART MARKING.

3 10 % 30 50. 10 % 30 30 - Vishay Dale . 10 % 30 30 - Inductance value . Note - Date code (1) Rated DC current based on the maximum temperature rise, not to exceed 40 C at +85 C ambient Revision: 21-Jul-15 1 Document Number: 34044. For technical questions, contact: THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT. ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT IMC- 1812 . Vishay Dale DESCRIPTION. IMC- 1812 10 H 10 % ER e3. MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD. GLOBAL PART NUMBER. I M C 1 8 1 2 E R 1 0 0 K. PRODUCT SIZE PACKAGE INDUCTANCE TOL. FAMILY CODE VALUE. Revision: 21-Jul-15 2 Document Number: 34044. For technical questions, contact: THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT. ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Legal Disclaimer Notice Vishay Disclaimer . ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE.

4 RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay 's knowledge of typical requirements that are often placed on Vishay products in generic applications.

5 Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay 's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

6 Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay . Product names and markings noted herein may be trademarks of their respective owners. 2017 Vishay INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. Revision: 08-Feb-17 1 Document Number: 91000.