Search results with tag "Terminal blocks"
XB IEC terminal blocks XB IEC terminal blocks— versatility ...
www.eaton.comand terminal blocks—all the latest in technology. The XB IEC terminal blocks make a big difference with screw type, spring cage and insulation displacement connection ... and terminal strip marking. With identical accessories, you can use screw, spring cage or IDC terminal blocks in combinations to fit your application needs.
M4-CG Series General Purpose Application Controller ...
cgproducts.johnsoncontrols.comTerminal blocks and bus ports See Physical features for terminal block and bus port locations on the CGM/CGE controller. Observe the following guidelines when wiring a CGM/CGE controller. Input and Output terminal blocks CG series controllers have removable input and output terminal blocks. All of the input terminal blocks are
Make your connection - Rockwell Automation
literature.rockwellautomation.comTerminal Blocks • Termination capability for solid wire, stranded wire or prepared wires with spade or ring lugs • Ability to use larger screwdriver • High visibility of wire insertion • Some terminal blocks mount on both A-B rail and DIN rail Bulletin 1492 Panel Mount Terminal Blocks • Some terminal blocks are gangable
JADE Economizer Module - Honeywell
customer.honeywell.comfour screw terminal blocks located on the left and right sides. Module wiring at the OEM factory is terminated via the header pin terminals located on the left and right sides. The header terminal pins and the terminal blocks have common terminations for the appropriate input or output. The part number for the OEM female mating connector is
Main catalog SNK Series Terminal Blocks Accessories ...
library.e.abb.comTerminal Blocks Accessories Marking Solutions Main catalog. Low Voltage Products & Systems 1 ... All Double Deck terminal blocks have two marking areas as well as two central channels per deck for: - Common and polarity distribution with JB screwless jumper bars.
DIN Panels and Accessories
www.lutron.comIn a feed-through panel, DIN rail-mounted terminal blocks are provided for line-voltage to DPM, and power supply wiring (if applicable). In a panel with breakers, ISO switch is provided for line voltage to MCB or RCBO breakers to power the DPM. DIN Rail Terminal Blocks Terminal blocks will accept one 0.75 mm 2 to 6.0 mm (18 AWG to 10 AWG) wire ...
1719 Ex I/O - Rockwell Automation
literature.rockwellautomation.comTerminal blocks can come in the form of side screw terminals, front screw terminals, or spring terminals. • Side screw terminal (1719-TB6, 1719-TB8, 1719-TB8x2)
CUSTOM MARKERS FOR TERMINAL BLOCKS - Entrelec Sales
www.entrelecsales.comAn order form for custom markers for PCB Terminal blocks is on the following page. In Section 2 of this Product Guide, on each PCB terminal block page, the marking method that …
Marking - wago.com
www.wago.com• Rail-Mounted Terminal Blocks • Rail-Mounted Terminal Blocks with Pluggable Connector (X-COM®-SYSTEM) ... MARKING Terminal Block Marking • Multi-line marking strips for clear, detailed control cabinet labels • WMB Inline markers on a reel are suitable for various
MKDSN 1,5 - Farnell
www.farnell.comConnection data rigid solid 0.14-1.5 flexible stranded 0.14-1.5 AWG 26-16 I [A] 13.5 U [V] 250 HCAF Description Printed circuit screw termination blocks, 5.0 mm pitch, with housing interlocking, color: green Printed circuit screw termination blocks, 5.08 mm pitch, ... In order to avoid tolerances between the terminal blocks and the printed ...
DINnectors Single-Level Terminal Blocks
cdn.automationdirect.comFeed-through terminal blocks provide the means to connect two wires together, and are available in sizes suitable for up to 8AWG wire. Ordering Information
WAGO Marking
www.wago.comterminal blocks • Multi-line marking strips for clear, detailed control cabinet labels • Easy-to-separate inline markers for multi-level terminal blocks • Versatile marking options for cables and conductors • Tailor-made software combined with a smartPRINTER for custom marking
Power breakers, contactors and fuses - Eaton
www.eaton.comSecondary terminal contacts mounted at the top front of the breaker and away from the primary voltage areas for improved safety and access. Finger-safe terminal blocks accommodate ring-tongue or spade type terminals as standard Arcflash Reduction Maintenance System Eaton’s patented Arcflash Reduction Maintenance System technology
Catalogue Terminal blocks - entrelecsales.com
entrelecsales.comShort Form Catalogue Terminal blocks Gross Automation (877) 268-3700 · www.entrelecsales.com · sales@grossautomation.com
Hi-lume 1% 2-Wire LED Driver Forward-Phase Control Overview
www.lutron.com• Driver is grounded by a mounting screw to the grounded fixture (or by terminal connection on the K case). • Terminal blocks on the driver accept one solid wire per terminal from 18 AWG to 16 AWG (0.75 mm ( to 1.5 mm(). • Fixture must be grounded in accordance with local and national electrical codes.
Brochure SNK Series Terminal Blocks Accessories Marking ...
library.e.abb.com3 and Marking Solutions Optimize your inventory cost Significant reduction of part numbers to manage: - Less terminal blocks and accessories needed to do your electrical installation
Bulletin 1492 ClearMultiprint Marking System
literature.rockwellautomation.comThe ClearMultiprint marking system marks terminal block tags, heat shrink, self-laminating wire, and adhesive labels for use on terminal blocks, wires, cables and other industrial components.
1794-SG002H-EN-P FLEX I/O and FLEX I/O-XT Selection Guide
literature.rockwellautomation.comTerminal base termination selection includes screw-clamp, spring-clamp, and cage-clamp to wire directly to 2-, 3-, or 4-wire devices. ... long wiring runs and external terminal blocks • control cabinet panel space ... • Determine whether to panel mount or DIN rail mount the FLEX I/O system and at what orientation (horizontal or
Motor control centers— low voltage - Eaton
www.eaton.comWhen master terminal blocks are specified, a sketch showing general location of terminals is provided. Class II Control Centers The same as Class I, but designed to form a complete control system. They include the necessary electrical interlocking and interwiring between units and interlocking provisions to remotely mounted devices.
EIM 2000 Series E796 M2CP - Emerson Electric
www.emerson.comcircuit breaker. EIM terminal blocks are furnished with wire binding screw connectors with rising captive plates, allowing field connection by several methods: 1) strip and connect bare wire, 2) strip and install wire ferrule, 3) strip and install crimp-on insulated or non-insulated ring tongue or similar terminal.
Bulletin 1492 In-Panel I/O Wiring ... - Rockwell Automation
literature.rockwellautomation.comTerminal Blocks & Wiring Systems • 1492 Analog Interface Module Fuse • 4/8/16 Channel Input Fused Interface Modules • 15 or 25 Pin D-Shell to I/O with shied • Supports inputs analog modules • Supports 1756, 1769, 1746, 1794 and 1771 I/O Platforms, 700H and 700S PowerFlex Control I/O • Extra Terminal • 10…30V DC • 10…132V AC
PACSystemsTM RX3i I/O Providing High Performance and ...
www.emerson.comIn the RX3i family all I/O modules have removal terminal blocks for easy commissioning and maintenance. This focus on ease of use is extended with the range of supported wire gauges. Depending on the Terminal block type chosen, the wire gauge ranges from 0.081mm2 - 1.5mm2 (28 - 14AWG) solid or stranded wire.
Installation Guide Energy Meter with Modbus Connection
www.solaredge.comrail using the DIN-rail clips supplied with the meter. To mount the meter directly on a surface: 1. Carefully remove the terminal blocks on both sides of the meter. 2. Use the two mounting holes on both sides of the meter to mark the hole positions. NOTE Do not use the meter as a drilling guide; the drill may damage the screw terminals and metal
1492 Marker Cards & Marking Systems - mc-mc.com
www.mc-mc.comindustrial equipment, wires and terminal blocks for both Allen-Bradley and others. We off er two marking systems and a wide assortment of marker cards. The ClearMark™ Printer ... The fl exible marking tool of the Allen-Bradley terminal block product line is the X-Y Plotter. This marking solution accommodates the low to medium volume marking ...
Magnum DS, SB and IEC low voltage power circuit ... - Eaton
www.eaton.comSecondary terminal blocks (page 14) Rejection pins (page 15) Cassette extension rails (page 22) Shutters (optional) (page 17) Back plane (page 17) Figure 4. Magnum drawout cassette (800–3200 A), universal standard frame OEM cassette shown
54 Courtesy of Steven Engineering, Inc. - (800) 258-9200 ...
stevenengineering.comof terminal blocks. Details of group marking products that can be fixed to end brackets can be found in the chapter titled Mounting material starting on page 483. Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com.
UL Standards Listing for Industrial Control Products
literature.rockwellautomation.com1492-P Standard Feed-through IEC Push-in Terminal Blocks 12 22F PowerFlex™ 4M AC Drives 14 25A, 25B, and 25C PowerFlex 520 family of AC Drives 14 20F, 20G PowerFlex 750 family of AC Drives 14 Added references to the following standards UL 2367 13 UL 508C 14 UL 61800-5-1 14 Removed the following products/Bulletin Nos.:
Contact Specifications - MILNEC
www.milnec.comboard applications with improved signal integrity. Please ... are mounted directly to printed circuit boards or flex ... tronics without the use of pigtails or bulky terminal blocks. Direct termination of contacts to PC boards also increases signal …
Bulletin 1492 ClearPlot Basic
literature.rockwellautomation.comMarking System A Capable Plotter with a Small Footprint A robust and flexible marking system for low to medium volume users This plotter provides a flexible marking tool for Allen-Bradley terminal blocks—all from a compact design. The pen-based system provides
VersaView 5000 ThinManager Thin Clients and Industrial ...
literature.rockwellautomation.comRevised first sentence in Tip table ab out supplied DC terminal blocks. 32 Revised the second Attention table in the Connect Power section to apply to computers with a Windows OS. 31 Added the cross-reference to step 2 in the Connect DC Power subsection. 32 Added Cat. Nos. 6200P-NS3x1K, 6200P-NS3C6, and 6200T-NAK as applicable models for photo ...
Terminal blocks, fuse blocks and fuse holders
www.eaton.comTerminal Blocks, Fuse Blocks and Fuse Holders Screw Connection ... l UL ® and cUL recognized—File No. E67464 l CE approved l LVD 1 l EN 60947-7-1 l EN 60947-7-2 l EN 60998-2-3 l EN 60352-4/A1 l CSA—File No. 244177 Note 1 Not all standards apply to all terminal blocks. Contact Eaton for details.
Terminal Blocks Specifications - Rockwell Automation
literature.rockwellautomation.comScrew Type Terminal Blocks Terminal Block Specifications 1492-JD3 1492-JD4 1492-JT3M Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block. 0.20" (5.1 mm) 2.72" (69 mm) 2.19" (55.5 mm) 0.24" Specifications terminal block Specifications
Terminal Blocks - IDEC
www.idec.comTerminal Blocks Circuit Breakers ... Marking Strip PVC BNM7 BNM7 BNM7 BNM7 Fiberglass BNM9 BNM9 BNM9 BNM9 End clip BNM3 BNM3 BNM3 BNM3 Ring Terminal Jumpers BNJ16 BNJ26W BNJ46 BNJ56 Fork Terminal Jumpers BNJ16F BNJ26FW BNJ46F BNJ56F 1. BNDN1000 aluminum DIN rails are available in 1 meter lengths. 2. Marking strips are sold in 1 meter lengths.
Terminal Blocks Overview - Omega Engineering
www.omega.comfor marking individual terminal blocks and end stops, strips of ... terminal block system with a universal range of accessories. Marking, bridging and testing accessories are standardized across the different clamping technologies—reducing inventory and logistics costs. The modular
Terminal blocks - ABB
library.e.abb.com1 Screw clamp Can also be used as end stop Description Types Part numbers Copper bar Wire clamp Wire clamp Grey Grey Ground terminal block Screw clamp DIN 1 (EN 50035, DIN 46277/1, NFL 63018) Screw Rigid clamp Flexible Wire strip. Recomm. Recomm. Protection length screwdriver torque Wire strip. Recomm. Recomm. Protection length screwdriver ...
MiCOM P220/P225
www.se.comProtective Conductor (Earth) Terminal if that terminal is part of a terminal block or sub-assembly e.g. power supply. *NOTE: THE TERM EARTH USED THROUGHOUT THIS GUIDE IS THE DIRECT EQUIVALENT OF THE NORTH AMERICAN TERM GROUND. 3.2 Labels . See Safety Guide (SFTY/4L M/G11) for equipment labelling information. 4. INSTALLING, …
POINT I/O Modules - Rockwell Automation
literature.rockwellautomation.comthe base. The removable terminal block (C) also snaps into the base and provides the wiring and terminations for field-side connections, as well as system power for the backplane. POINT I/O has four major components: • I/O modules provide the field interface and system-interface circuitry
ComEx Control Stations - BARTEC
www.bartec.deE Switching or illuminating module or terminal block FF 00 – without accessory 01 – protective metal shroud 02 – external earth connection 03 – shroud + external earth connection 10 – labelling by template 18 – locking device 33 – earth plate 99 – on request Selection Key ComEx Control Station 0 7 - 3 5 * A E * - * * * B C D * D ...
Compact™ 1769-IF4 (Series B or Later) Analog Input Module
literature.rockwellautomation.com• Terminal block, catalog number 1769-RTBN18 (1 per kit) • Door Labels, catalog number 1769-RL2 Series B (2 per kit) • Door, catalog number 1769-RD (2 per kit) NOTE It may be necessary to rock the module slightly from front to back to remove it, or, in a panel-mounted system, to loosen the screws of adjacent modules.
Similar queries
Terminal blocks, Terminal, Marking, Rockwell Automation, Terminal blocks mount, Mount Terminal Blocks, JADE Economizer Module, Honeywell, Screw terminal blocks, Terminal Blocks Accessories Marking Solutions, Terminal Blocks Terminal blocks, 1719, Screw, Screw terminal, FOR TERMINAL BLOCKS, MARKING Terminal, Connection, Blocks, Eaton, Terminal connection, SNK Series Terminal Blocks Accessories Marking, FLEX, Mount, Rail mount, EIM 2000 Series E796 M2CP, 1492, Rail, Board, Printed circuit, Recognized, Terminal Blocks Terminal, Omega Engineering, Terminal block, Labelling, ComEx Control Stations, 1769-IF4