Syncro Multi-loop Analogue Addressable Fire Control Panel
The Syncro ASM is an analogue addressable fire detection and alarm control panel with16 zonal LED indicators and is available in models with either 1 or 2 detection loops. It can support up to 126 devices for Apollo protocol, up to 127 devices for Hochiki ESP protocol per loop driver.
Download Syncro Multi-loop Analogue Addressable Fire Control Panel
Information
Domain:
Source:
Link to this page:
Related documents
EST3 Installation and Service Manual
www.thealarmtech.com[2] Allowed only on control panels that transmit trouble event signals off premises [3] Allowed only with monitor device types and switches [4] Allowed only if user route includes the control panel [5] Allowed only on nonrequired remote annunciators [6] Allowed only when setting does not prevent the activation or transmission of alarm or
Basic - ClimateMaster
files.climatemaster.comESD (Emergency shut down). This is normally connected to Fire alarm input, check for dry contact closure from input at ESD terminal and C. Description of Operation Status LED (Green) Status LED (Green) Status LED (Green) Alarm Relay Normal Mode On - Off Normal Mode with UPS On - Flashing Code 8 Cycle (Closed 5 seconds, open 25 seconds)
QS1 Technical Reference Manual
nwoss.comoperating the fire alarm system from the control panel CPU/Display Unit. It is intended for those who might be expected to operate the control panel in a fire alarm emergency. Chapter 6, Installation: Provides instructions for installing the fire alarm system. It is intended for trained installers who are
IQSmoke (QS5110-840) Wireless Smoke Heat Alarm ...
qolsys.comThe Wireless Smoke Heat Alarm is a 3xAAA battery powered wireless detector intended for use with a compatible wireless alarm system. The detector has a built-in wireless transmitter, which communicates with the control panel. When smoke is detected, the alarm sounds a loud local alarm and the built-in transmitter sends a signal to the control ...
Product Guide Fire alarm solutions - Edwards signals
www.edwards-signals.comFire Alarm Control Panels 2 EDWARDS F i r e C o n t r o l P a n e l s Life Safety Specifications Specifications FSA64 FSA250 Notifiocann Ac pAl nescCotifioAc
EST3 Programming Manual - Fire Alarm Resources
www.firealarmresources.comEdwards Systems Technology, Inc. (EST), and others under separate licensing agreements. You may not reproduce, ... for fire alarm signaling and emergency voice communications. Strobe Applications Guide, P/N 85000-0049. This manual ... ULC S527 Standard for Control Units for Fire Alarm Systems
NFS-3030 Addressable Fire Alarm System
www.harn.co.thThe NFS-3030 is an intelligent Fire Alarm Control Panel de-signed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS-3030 is ideally suited for these applications. The NFS-3030 is part of the ONYX® Series of products from NOTIFIER.
Manual Pull Stations - Steel Fire Equipment
www.steelfire.comtemporarily, from the control panel. Availability of maintenance features is dependent on the fire alarm system used. Scheduled maintenance (Regular or Selected) for proper system operation should be planned to meet the requirements of the Authority Having Jurisdiction (AHJ). Refer to current NFPA 72 and ULC CAN/ULC 536 standards. Wiring Notes