250AE General Purpose Strain Gages—Linear Pattern

1 For technical questions, No.: 11292 Revision: Purpose Strain Gages linear PatternGeneral Purpose Strain Gages linear PatternGAGE Pattern DATA actual sizeGAGE DESIGNATIONSee Note 1, 3 RESISTANCE (OHMS)See Note 2 OPTIONS AVAILABLESee Note 3EA-XX- 250AE -350ED-DY- 250AE -10 CWA-XX- 250AE -350WK-XX- 250AE -10 CEP-08- 250AE -350SA-XX- 250AE -350SK-XX-250 AE-10 CSD-DY- 250AE -10 CWD-DY- 250AE -10C350 , E, L, LE, PE, L*, LE*W*W*, SP35*DESCRIPTIONG eneral- Purpose gage with high-dissipation grid. See also 250AF DIMENSIONSL egend ES = Each Section CP = Complete Pattern S = Section (S1 = Section 1) M = MatrixinchmillimeterGage LengthOverall LengthGrid WidthOverall WidthMatrix LengthMatrix SERIES DATA See gage Series datasheet for complete specificationsSeriesDescriptionStrain RangeTemperature RangeEAConstantan foil in combination with a tough, flexible, polyimide backing.

2 5% 100 to +350 F ( 75 to +175 C)EDIsoelastic foil in combination with tough, flexible polyimide film. 2% 320 to +400 F ( 195 to +205 C)WAFully encapsulated constantan gages with high-endurance leadwires. 2% 100 to +400 F ( 75 to +205 )WKFully encapsulated K-alloy gages with high-endurance leadwires. 452 to +550 F ( 269 to +290 C)EPAnnealed constantan foil with tough, high-elongation polyimide backing. 20% 100 to +400 F ( 75 to +205 C)SAFully encapsulated constantan gages with solder dots. 2% 100 to +400 F ( 75 to +205 C)SKFully encapsulated K-alloy gages with solder dots. 452 to +450 F ( 269 to +230 C)SDEquivalent to WD Series, but with solder dots instead of leadwires.

3 320 to +400 F ( 195 to +205 C)WDFully encapsulated isoelastic gages with high-endurance leadwires. 320 to +500 F ( 195 to +260 C) Note 1: Insert desired S-T-C number in spaces marked 2: Tolerance is increased when Option W, E, SE, LE, P, or SP35 is 3: Products with designations and options shown in bold are not RoHS compliant.*Options available but not normally recommended. See Optional Features datasheet for Precision Group, Disclaimer NoticeDocument No.: 63999 Revision: 15-Jul-2014 DisclaimerALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, VPG ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product specifications do not expand or otherwise modify VPG s terms and conditions of purchase, including but not limited to, the warranty expressed makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.

4 To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular Purpose , non-infringement and provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG s knowledge of typical requirements that are often placed on VPG products. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.

5 You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such names and markings noted herein may be trademarks of their respective Vishay Precision Group, Inc.

6 , 2014. All rights Disclaimer Notic