Transcription of SPEC DATA Submittal Sheet # 002 - Pro-Twist
1 Product SpecificationsSD00205-04-16 bugle FINE THREAD DRYWALL SCREWM eetsASTM C-1002 Reduced #2 PhillipsNOT Recommended for use with treated Guidelines 0-2500rpm Screwgun with torque adjustment - Overdriving may result in fastener failure or stripoutof the work surfaceThe fastener is fully seated when the head s bearing surface is flush with the fastener must penetrate beyond the metal a minimum of three threads to comply with the codeUltimate Value ChartsSteel - Screws driven into steel were driven with three exposed threads on the off side of the connection,then pulled out with testing that all results were obtained in strict adherence to ASTM test protocol. These ultimate figures areoffered only as a guide and are not guaranteed in any way by PrimeSource. A 4:1 safety ratiois (Pull) Lbs. 1 Piercing Screws Ultimate Value ChartShear to Metal16524534917226035814919636717339741 0601620412625628337591829363834 MinimumTorsionalStrength (Lb)24303956 2016 PrimeSource Building Products, Inc.
2 Pro-Twist sharp multi-purpose screws meet or exceed ASTM C-1002 and/or ASTM C-1513 Gypsum board to 25-20 Gauge Steel PRIMESOURCE FASTENERS ARE MANUFACTURED IN AN ISO 9002 AND ISO 14001 CERTIFIED AND APPROVED FACTORYTO PRIMESOURCE PERFORMANCE SPECIFICATIONS AND PRINT 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Piercing 25 Part #FinishBulk ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle leadSingle lead48 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr.
3 Min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-11748 hr. min. B-117FS100FS118FS114FS112FS158FS6200FS20 0FS214FS212FS300FS312FS334FS400FS412FS50 0FS600666666778810101010101011-1/81-1/41 -1/21-5/8222-1/42-1/233-1/23-3/444-1/256 16~1816~1816~1816~1816~1816~ DATA Submittal Sheet # 002
