Interfacing Analog To Digital Data Converters
Found 6 free book(s)Chapter 5 Testing Converters F - Analog Devices
www.analog.comANALOG-DIGITAL CONVERSION 1. Data Converter History 2. Fundamentals of Sampled Data Systems 3. Data Converter Architectures 4. Data Converter Process Technology 5. Testing Data Converters 5.1 Testing DACs 5.2 Testing ADCs 6. Interfacing to Data Converters 7. Data Converter Support Circuits 8. Data Converter Applications 9. Hardware Design ...
INTEGRATED CIRCUITS AND APPLICATIONS
www.iare.ac.inPart-3 DATA CONVERTER INTEGRATED CIRCUITS D-A & A-D Converters 2 . PART-1 ... This circuit is mainly used in digital interfacing, analog to digital systems, and pulse code modulation systems. 75 Sample and hold circuit The time during which the voltage across the
NI 9218 Datasheet - National Instruments
www.ni.comData • Two 24-bit analog-to-digital converters (ADCs) simultaneously sample both AI channels. • The NI 9218 provides channel-to-channel isolation. • The NI 9218 reconfigures the signal conditioning for each measurement type. • The NI 9218 provides excitation for IEPE and bridge completion measurement types.
Serial LVDS High-Speed ADC Interface - Xilinx
www.xilinx.comFigure 3 shows the analog input signal along with the input, bit, and frame clocks. Sample N of the analog signal is converted to digital format and presented at the ADC outputs after a latency period. The analog signal is converted into a digital, serial data stream with 12-bit ADC resolution that is provided together
AD9221/AD9223/AD9220 Complete 12-Bit 1.5 ... - Analog …
www.analog.comThe digital output data is presented in straight binary output format. An out-of-range (OTR) signal indicates an over-flow condition that can be used with the most significant bit to determine low or high overflow. PRODUCT HIGHLIGHTS The AD9221/AD9223/AD9220 family offers a complete single-chip sampling 12-bit, analog-to-digital conversion ...
TMP35/TMP36/TMP37 Low Voltage Temperature Sensors …
www.arduino.ccits linear output and precise calibration simplify interfacing to temperature control circuitry and A/D converters. All three devices are intended for single-supply operation from 2.7 V to 5.5 V maximum. Supply current runs well below 50 µA, providing very low self-heating—less than 0.1°C in still air. In addition, a