Slew Rate Controlled Load Switch
Found 3 free book(s)Load Switch Basics - NXP
www.nxp.comLoad Switch Options The many possible applications for load switches let the load-switch manufacturers offer multiple load-switch configurations. A basic load switch such as the NX3P190 from NXP (Figure 3) resembles the circuit in Figure 1 – it has the P-channel MOSFET controlled by a level-shifting and slew-rate control circuit. Figure 3.
LTC7004 (Rev. C)
www.analog.comHigh Voltage, High Side Switch with 100% Duty Cycle n Wide Operating VIN: Up to 60V n 1Ω Pull-Down, 2.2Ω Pull-Up for Fast Turn-On and Turn-Off Times with 35ns Propagation Delays n Internal Charge Pump for 100% Duty Cycle n Adjustable Turn-On Slew Rate n Gate Driver Supply from 3.5V to 15V n Adjustable VIN Overvoltage Lockout
Analog Discovery ™ Technical Reference Manual
digilent.comAn analog switch (ADG612) allows selecting High Gain versus Low Gain (EN_HG_SC1, EN_LG_SC1) signals from the FPGA. The P and N branches of the differential path are switched together. The ADG612 quad switch was used because it provides excellent impedance and bandwidth parameters: - 1 pC charge injection