Example: biology
7 Sealants - Master Builders Solutions
FORMERLY SONOLASTIC® NP 1™ DESCRIPTION MasterSeal NP 1 is a one-component, high-performance, non-priming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many …
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Concrete hardener and dustproofer - Master Builders Solutions
assets.master-builders-solutions.comMasterKure HD 300WB is a magnesium fluorosilicate concrete hardener and dustproofer that ... product data sheet and SDS are being used; call Customer Service (1-800-433-9517) to ... understand and follow all Safety Data Sheets and product label information for this product prior to use. The SDS can be
MasterProtect HB 400 - Master Builders Solutions
assets.master-builders-solutions.comMasterProtect HB 400 is meant to be applied as a two-coat system, achieving a total dry-film thickness (DFT) of 12–16 mils (0.3 mm–0.4 mm). For re-coat applications one coat applied at 11–5 mils (0.279–0.127) DFT. 2.Apply MasterProtect HB 400 by brush, spray, roller, or spray-and-backroll. Spray apply
Traffic Coatings MasterSeal M 200 - Master Builders Solutions
assets.master-builders-solutions.com7 Coatings DESCRIPTION MasterSeal M 200 is a one-component, moisture curing polyurethane base coat for use in MasterSeal Traffic 1500 and 2000 deck coating systems. PRODUCT HIGHLIGHTS • MasterSeal M 200 has strong adhesion properties • Easy preparation reduces on-site labor costs • Available in both self-leveling and flash/sloping
MasterProtect H 1000 - Master Builders Solutions
assets.master-builders-solutions.comAir, substrate, and material temperatures should be 20 °F (-7 °C) and rising at the time of the application. Substrate must be frost free. Do not apply sealer when temperatures are expected to fall below 20 °F (-7 °C) within 12 hours or when rain is expected within 4 hours following application. Maximum application temperature is 95 °F (35 ...
Dampproofing MasterSeal 610, 614, 615
assets.master-builders-solutions.comand pinholes. Carry coating over exposed top and outside edge of footing. Spread around all joints, grooves, and slots and into all chases, corners, reveals and soffits. Bring the coating to finished grade. 3.Backfilling: Place backfill at least 24–48 hours after application, but within 7 days. Do not rupture or damage the film or displace the
Coatings MasterSeal 350 - Master Builders Solutions
assets.master-builders-solutions.comEPOXY MORTAR 1.Mix the two components of MasterSeal 350 using the recommended procedures under the Mixing section. 2.Slowly add up to five parts by volume of oven-dried sand to one part of mixed epoxy. 3.For larger applications, a paddle-type (mortar) mixer may be used. However, the A and B components must first be mixed together using
MasterEmaco T 1060 - Master Builders Solutions
assets.master-builders-solutions.comfor surface prep requirements to permit proper bond. REINFORCING STEEL 1. ... • For professional use only; not for sale to or use ... Master Builders Solutions Construction Systems US, LLC 889 Valley Park Drive, Shakopee, MN 55379 Customer Service +1 (800) 433-9517
MasterEmaco N 425 - Master Builders Solutions
assets.master-builders-solutions.comTechnical Data Composition MasterEmaco N 425 is composed of crystalline (quartz) silica and Portland cement. Compressive strength, psi (MPa) ASTM C 109, modified* 1 day 2,150 (14.8) 7 days 5,600 (38.6) 28 days 6,750 (46.5)
MasterSeal 550 - Master Builders Solutions
assets.master-builders-solutions.comhigh-pressure water jetting grit blasting and grinding. Spalled concrete should be cut back to ... using a short, stiff bristle brush or roller. Trowel application can be undertaken as necessary. For heavy 6-10 mm depressions, honeycombs etc. use less gauging liquid and …
MasterSeal NP 2 - Master Builders Solutions
assets.master-builders-solutions.comPrecast Gray and Limestone COLORS 40 standard, stocked colors are available. Refer to Master Builders Solutions Color Portfolio for additional colors. YIELD See page 3 for charts STORAGE Store in unopened containers in a cool, clean, dry area. Do not open containers until ready for use. SHELF LIFE PARTS A AND B 1 year when properly stored