ALCATEL ONETOUCH Ride-Fi User Guide

1 Availableapplicationsandservicesaresubje cttochangeatanytime. iTable of ContentsIntroduction1 Before You Begin1 Compatible Operating Systems (OS)1 Package Contents2 SSID and Security Key2 Additional Information3 Get Started4 Parts and Functions4 LED Indicators5 LED Indicator Layout5 LED Indicator Description5 Sleep Mode6 SIM Card6 Handling a SIM Card6 Insert a SIM Card7 Remove the SIM Card8 Check the SSID and Security Key9 Turn Your Device On and Off10 Charge Your Personal Devices with the ride -Fi11 Connect with Wi-Fi (WLAN)12Wi-Fi (WLAN) Overview12 Activate Wi-Fi (WLAN) Function12 Connect Windows PCs with Wi-Fi13 Windows 1013 Windows 814 Windows 716 Connect Mac Computers with Wi-Fi18 Connect an iPhone, iPod touch , or iPad20 Connect an iPhone or an iPod Touch20 Connect an iPad22 Connect an Android Device26 Settings30 Device Manager (Web UI) Overview30iiHome Page32 Connected Devices33 Settings Tab35Wi-Fi Basic Settings36Wi-Fi Advanced Settings37 Mobile Network Settings39 Device Settings43 Advanced Router Settings48 Notification55 About56 Support Tab57 Appendix59 Troubleshooting59 Specifications61 Safety and Notices62 Safety Precautions62 Specific Absorption Rates (SAR) for Wireless Device63 FCC Radio Frequency Emission63 FCC Notice63 Index65 Introduction1 IntroductionThe following topics describe the basics of using this Guide and your new mobile broadband You BeginThank you for purchasing ONETOUCH Ride-Fi .

2 The following topics explain how best to use this Guide to get the most out of your mobile broadband Using Your DeviceRead Safety and Notices thoroughly for proper services may be limited by subscription contract Usage NotesNote that most descriptions in this Guide are based on your device's default settings at the time of and Key LabelsScreenshots and Key labels are provided for reference only. Actual windows, menus, etc. may differ in NotationsIn the user Guide , the mobile broadband device may be referred to either as "mobile broadband device," "hotspot", "device", or "Wi-Fi router".Compatible Operating Systems (OS)The table below outlines the compatible operating systems (OS) for your device. Use outside these environments may affect performance. Additional factors (hardware, connected peripherals, installed applications, etc.) may also affect performance. n For computer support, OS version upgrade information, etc., see the corresponding manufacturer's product support documentation.

3 N The information for operating system (compatible OS) listed below is the current information for your device sold as of March operating systems (OS)Microsoft Operating Systems Vista 32 and 64 bitMicrosoft Operating Systems Windows7 32 and 64 bitMicrosoft Operating Systems Windows8 32 and 64 bitMacintosh Operating Systems OSX and laterLinux Operating Systems Ubuntu LTS versions and laterGoogle Operating System for Chrome OSAvailable hard disk capacity50 MB required (100 MB+ recommended) (common to all Operating Systems listed above)Recommended resolution1024 x 768 or higherCompatible browsersInternet Explorer 8 and laterSafari and laterChrome 36 and laterFirefox 31 and laterPackage ContentsSee below for details on everything you will find in the box for your ONETOUCH Ride-Fi . n ONETOUCH Ride-Fi n Get Started Guide n Important Information BookletSSID and Security KeyBefore connecting Wi-Fi devices to your ONETOUCH Ride-Fi , you will need to confirm the SSID (network name) and security key (password).

4 N Open the back cover of the device, you will see the MEID label. Introduction3 You will see the SSID (network name) and Key (password).Note: There are two SSIDs set for your ONETOUCH Ride-Fi . By default, the SSID and Key are set for the Main InformationThe following list describes additional information useful to know before you begin using your ONETOUCH Ride-Fi . n Your mobile broadband device accommodates software updates. Always use the latest software. n Note that connection speeds may drop or connections may be disabled depending on line traffic or connection environments. n When using WLAN overseas, change the settings according to the laws of those countries. n To enhance security, it is recommended that you set a passcode for unlocking the StartedThe following topics give you all the information you need to set up your device and wireless service the first and FunctionsLearn your Ride-Fi 's primary parts and Layout The following illustration outlines your Ride-Fi 's primary external features and IndicatorsThe Wi-Fi indicator displays the Wi-Fi signal status, and the Network indicator displays the network connection ChargerThis is the power input for the device.

5 Plug it into a car s 12V or 24V power socket to power the portYou can connect to the USB port for an alternative power source and can be used for charging other coverRemove the back cover to access the SIM buttonPress and hold the Power button to power on/off, reboot, or wake up from sleep IndicatorsThe following topics describe the details of your device's LED Indicator LayoutExplore your device's LED Indicator indicatorThe Wi-Fi indicator displays the Wi-Fi signal statusNetwork indicatorThe Network indicator displays the network connection statusLED Indicator DescriptionThe description for the LED as bellow: Network Signal LED LED Off - Device is powered off or in power saving mode Flashing Blue (In 1s frequency) - Searching for 4G LTE network Flashing Blue (In frequency) - Attempting HFA Solid Blue - Connected to 4G LTE network Flashing Red (In frequency) - Searching for network Flashing Red (In 1s frequency) - Roaming request, need to confirm on WebUI Solid Red - No Signal Flashing Lilac - Searching for 3G network Solid Lilac - Connected to 3G networkWi-Fi LED LED Off - Device is powered off or in power saving mode Solid Blue - Wi-Fi is activeGetStarted6 Sleep ModeIf your Ride-Fi is not used for a while, the device enters sleep mode and the LED indicators turn off automatically.

6 N Press the Power button to wake the LED LED indicators will indicate current status. l If there is no Wi-Fi access or activity on your device, it will enter sleep mode to save power. l There are two levels of sleep mode: o If there are no transmissions or activity for 10 minutes, the LED indicators will be off but WLAN will still be enabled. LED indicators will turn on and the device will exist sleep mode when you operate the device or access Wi-Fi. o If no transmissions or operation of your device in 30 minutes, WLAN will be disabled. Press the Power button to turn on LED indicator and exit sleep mode. WLAN function is enabled and Wi-Fi devices can reconnect to the ONETOUCH Ride-Fi . o If there are no transmissions or activity for 30 minutes, the LED indicators will be off and WLAN will be disabled. Press the Power button to exit sleep mode; the LED indicators will turn on, WLAN will be enabled, and Wi-Fi devices can now reconnect to the ONETOUCH Ride-Fi .

7 L The time required to recover the network connection varies by environment, settings, CardThe SIM card is an IC card containing your device's account number and other customer : Your device's SIM card is a SIM CardKeep the following in mind when handling a SIM card. n Customer is responsible for any damage caused by inserting the SIM card in another-brand IC card reader, etc. Sprint is not responsible in such case. n Always keep the IC chip clean. n Wipe clean with a dry, soft cloth. n Avoid applying labels. May damage the SIM card. n See instructions included with the SIM card for n The SIM card is the property of Sprint. n The SIM card is replaceable (at cost) in case of loss/damage. n Return the SIM card to Sprint when cancelling subscription. n Returned SIM cards are recycled for environmental purposes. n Note that SIM card specifications and performance may change without notice. n It is recommended that you keep a separate copy of information that is stored on the SIM card.

8 Sprint is not responsible for damages from stored information that is lost. n Always follow emergency procedures to suspend service if your SIM card or device (SIM card inserted) is lost or stolen. For details, contact Customer Service. n Always power off the mobile broadband device before inserting or removing the SIM a SIM CardFollow these instructions to insert a SIM card. Remember to power off your device before inserting a SIM : Your device's SIM card is preinstalled. These instructions are for reference only. 1. Remove the back cover. 2. Open the SIM card holder and put in the SIM 3. Close the back the SIM CardFollow these instructions to remove the device's SIM card. 1. Unplug the device from the car's power socket to power off the device before removing the SIM card. 2. Remove the back 3. Open the SIM card cover and remove the SIM card. 4. Attach the back cover. Check the SSID and Security KeyYour Ride-Fi 's default SSID (network name) and security key (password) are printed on a label beneath the device's back cover.

9 Turn the device off and remove the back cover to access this information. 1. Remove the back cover. 2. Check the SSID (network name) and security key (password) printed on the label beneath the battery. GetStarted10 3. Replace the back Your Device On and OffThe instructions below explain how to turn your Ride-Fi on and off, or to restart if it cannot be powered on and off using the Power Your Device On 1. Plug the device into a car's 12v or 24v power socket. 2. Press and hold the Power button for at least 2 device's Wi-Fi function activates and automatically connects to the Your Device Off n Press and hold the Power button for at least 2 seconds, or unplug the device from the 12v or 24v power device will power Your DeviceIf your device will not turn on or off using the Power button, use the action below to restart it. 1. Press and hold the Power button for 10 device will restart. 2. Release the Power button after Wi-Fi has restarted.

10 3. You can also restart your device by unplugging and plugging the device back into a 12v or 24v power : Restarting your device does not reset the device Your Personal Devices with the ride -FiYour ONETOUCH Ride-Fi is equipped with a USB port that can be used to charge your personal devices such as a phone, tablet, or charge your other devices: 1. Plug the Ride-Fi into your car's 12v or 24v power socket. 2. Connect your personal device to the Ride-Fi using a USB cable (not included).Note: The output of the Ride-Fi 's USB port is 5V (WLAN)12 Connect with Wi-Fi (WLAN)The following topics outline basic features and operations of your device's Wi-Fi (WLAN) connections, including connecting with various OS and device (WLAN) OverviewBelow are some basics of your device's Wi-Fi (WLAN) (WLAN) Information n Advanced Settings: Change your device's Wi-Fi (WLAN) settings as required. n Simultaneous Connection: Use your device to connect up to 15 Wi-Fi devices simultaneously.