Anti-Static Filter Element - Royal Hydraulics

1 Anti-Static Filter ElementThe hilliard Corporation100 West Fourth StreetElmira, New York 14902-1504 Phone: 607-733-7121 Fax: 607-733-0928http//: Local Representative: static discharge is a common problem in the lubri-cating oil systems of today s the static is most often observed in the areasof the lube system with nonconductive componentssuch as the Filter vessel, the root cause of the staticproblem is the low fluid conductivity of the lubri-cant has recently developed a Filter cartridge thatactually improves and maintains the lubricating oil sconductivity for extended periods of time andeliminates the static discharge problem.

2 Filtercartridges are offered in commercial sizes 310, 511,and 718-size Element treats up to 3,000 gallons oflubricating oil satisfactorily. A convenient andeffective method of treating the lubricating oil is ina kidney-loop arrangement utilizing a Hilco portablefilter. One Filter assembly can service the needs ofseveral The hilliard corporation for help in sizingyour particular application. Our in-house laboratoryservice is available for your 10 HMF Series Portable FilterHilco Model AS718-00-CNAnti- static Filter ElementThe hilliard Corporation100 West Fourth StreetElmira, New York 14902-1504 Phone: 607-733-7121 Fax: 607-733-0928 Local Representative:AIF-1 THC-500-09/06 Helicopter Engine Air Intake FiltersThe hilliard corporation was approached by SchweizerAircraft corporation to develop a custom dry media filterfor a helicopter application.

3 hilliard engineers developeda specific media and pleat configuration to meet thecustomer s air flow, pressure drop, and dirt-holdingrequirements. The design was optimized through exten-sive flight and ground testing to yield the maximumperformance for minimum weight. The dry media simpli-fies service through use of compressed air or other envi-ronmentally friendly techniques. The design eliminatesthe time and labor required to dry and re-oil traditionalfilter types. hilliard manufactures many other air and oilfilter designs in the Elmira plant.

4 This resulted in rapidprototyping, testing, and expedited project completionunder hilliard corporation offers customengineering, design, and manufacture offiltration and motion control has been in business since 1905 andhas been offering a complete line of oil andair filtration products since 1928. We standready to custom-design a Filter to meet yourspecifications and requirements for designreview of your application. For moreinformation, call 607-733-7121, or send anemail to Some-one will be happy to Bag Filter CartridgesHilco s high-performance line of pleated bag Filter cartridges are intended to increase the filtrationefficiency of existing bag Filter housings, while reducing the associated costs of frequent bag filters fit into a standard basket to increase dirt-holding capacity and overall efficiency.

5 Thecartridge is designed with a flexible molded end that seals on the inside diameter of the basket,eliminating potential bypass Utilizes standard-size #1 and #2 Filter baskets Self-sealing, flexible molded end eliminates traditional bag bypassing concerns Synthetic Filter media facilitates usage in a variety of fluid applications Available in a wide range of micron retention ratings Large, usable surface area Environmentally friendly designBenefits Higher dirt capacities Fewer change outs Lower labor costsCharacteristics Polyurethane molded ends Maximum recommended differential = 20psid Synthetic Filter media supported by epoxy-coated steel screenThe hilliard Corporation100 West Fourth StreetElmira, New York 14902-1504 Phone: 607-733-7121 Fax: 607-733-0928 Local Representative.

6 BFC-3 Bag CapacityNominal Bag Size#1#1#1#1#1#1#2#2#2#2#2#2 Beta Ratio and EfficiencyBeta = micron15 micron25 micron41 micron51 micron69 micron4 micron15 micron25 micron41 micron51 micron69 micronBeta = micron19 micron27 micron43 micron53 micronn/a6 micron19 micron27 micron43 micron53 micronn/aDirtCapacity24 g30 g40 g40 g53 g53 g48 g60 g80 g80 g106 g106 g A 3/411 3/411 3/411 3/411 3/411 3/426 3/426 3/426 3/426 3/426 3/426 3/4 B 1/46 1/46 1/46 1/46 1/46 1/46 1/46 1/46 1/46 1/46 1/46 1/4 C 3/43 3/43 3/43 3/43 3/43 3/43 3/43 3/43 3/43 3/43 3/43 3/4 D 1/87 1/87 1/87 1/87 1/87 1/87 1/87 1/87 1/87 1/87 1/87 1/8 THC-500-03/06 Features O-ring sealed covers Swing bolt cover hardware Carbon steel or 316 stainless steel construction Available in duplex arrangement Suitable for a variety of inlet and outlet configurations Viton seals on lid and basket Differential, drain, and vent ports Two depths available: 15 and 30 Hilco s Series H8 Bag Filter Housing removes pipe scale, dirt, and other contaminantsfrom process liquids.

7 Water, chemical, and petroleum products are common equipment is fully protected due to quality design and of carbon or 316 stainless steel, single vessel models are designed for operat-ing up to 150 psi at 300 F. Particulate accumulates in a large sump area at the bottom ofthe basket. This design efficiently utilizes the bag Filter and prolongs the life of the 316 SS basket seals onto a viton o-ring to eliminate particulate bypass between thebasket and the seat. Optional mesh-lined baskets and o-rings are also Flow Rates to 220 gpm Designed to operate up to 150 psi at 300 F.

8 Low Pressure Drop Adjustable Support LegsTo speed evacuation and filling, the H8 Housing was designed with a vent in the housinglid and a drain port. Gauge ports are also located on the housing to enable easy installa-tion of gauges for monitoring differential pressure across the bag. Other design featuresinclude permanently piped housings that can be opened with simple tools without disrup-tion of the piping. Hardware need not be removed due to swing bolts with eye nuts whichallows easy opening and closing of the swing with a standard finish are blast-cleaned and painted inside and out with a two-part epoxy.

9 Stainless steel housings are satin-finished. Housings can be ASME Codeconstruction compatible. Special design requirements are Bag Filter HousingsThe hilliard Corporation100 West Fourth StreetElmira, New York 14902-1504 Phone: 607/733-7121 Fax: 607/737-1108 Local Representative:BFH-1QP-10/03 The Hilco Ceramic Membrane System is anideal way to lower your filtration costs. Thefiltration system utilizes high-velocity crossflow across the membrane advanced-technology ceramic mem-branes deliver outstanding performance,durability, and cost-effectiveness.

10 The robustfilter design and high efficiency can help solveyour tough filtration challenges. The Filter iswell-suited for multiple microfiltration (MF) andultrafiltration (UF) applications. Availablemembrane pore sizes are m, m, m, and and Benefits High surface area to unit volume Compact design Extended life with durable ceramic Chemically stable Broad pH range of 2-13 Immune to chlorine attack Steam sterilizable Back flushable Suitable for aqueous and solvent/chemical streams High and sustainable flux rates Easy, less frequent membrane cleaningCeramic Membrane CrossflowLiquid Filtration SystemNominal 7.