Box Rib Wall - AEP Span

1 Box Rib Walloptional features n Short cut sheets from 6'-0" to 1'-0". Additional fees and lead times may 18ga and 20ga available in G-90 with standard and custom colors subject to a minimum order size of 4,500 square feet and longer lead 18ga available in bare G-90 galvanized subject to a minimum order size of 18,000 square feet and longer lead Custom colors, thick film primer and/or clear coat paint finishes available. Subject to 4,500 square feet minimum order.* (See back)n Perforation options available for an additional charge. Minimum order size 1,500 square feet (Inquire for smaller orders). Select from standard perforation patterns with open areas of , , , or Crimp curving: GaugeMaximum Length Minimum Outside Radius2430'-0"24"2230'-0"24"2030'-0"48"1 820'-0"48"n Stucco embossed available on 29ga, 26ga, 24ga and 22ga. Subject to minimum. Order size of 1,500 square Rib is an economical, structural, exposed-fastener wall panel suitable for general Rib is ideal for vertical and horizontal wall, ceilings and soffit 2 Painted side41 8 36 Net Coverage13 8 73 16 PropertiesStandard FinishesGaugeBase Steel Thickness (in)Yield (ksi)Tensile(ksi)Wt.

2 (lbs/ft2)I+(in4/ft)S+(in3/ft)I-(in4/ft)S -(in3/ft)MetallicCoatingPaint Dura Tech Dura Tech 5000(polyvinylidene fluoride) orCool Dura Tech mx(metallic polyvinylidene) G90* : The moments of inertia, I+ and I-, presented for determining deflection are: (2 IEffective + IGross)/3*Bare 20 gauge has a AZ50 metallic Rib (Wall Applications only) BOX RIBWALL DETAIL @ RIB REVERSED BOX RIBROOF & WALL DETAIL @ RIBLap DetailPainted sideFor most current versions of literature please , WA Phone: 800-733-4955 Fax: 253-272-0791 Customer Service Centersstandard features n 36" coverage wall Wall Installation: Horizontal or Gauges: 22ga, 24ga, 26ga and 29ga in standard finishes and 20ga available in ZINCALUME Refer to AEP Span Color Charts for full range of color options and paint Custom manufactured panel lengths: 6'-0" to 50'-0".n Matching fiberglass panels Testing: ASTM E283 (air infiltration) and ASTM E331 (water infiltration).

3 All testing performed by accredited Wall assemblies rated for fire resistance (UL263) when installed in accordance with UL Building Code Approval Report: # Manufactured in Fontana, Rib WallOil Canning : All flat metal surfaces can display waviness commonly referred to as oil canning . Oil canning is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Inward Loads (lbs/ft2) per Span ( )2'-0"2'-6"3'-0"4'-0"5'-0"6'-0"7'-0"8'-0 "10'-0"29 Single SpanASD, W/ 268172119674330221711L/180----422415105 Double SpanASD, W/ 226154111654229211611L/180---------Tripl e SpanASD, W/ 263183133795237272113L/180-------191026 Single SpanASD, W/ 391250174986343322416L/180----533119137 Double SpanASD, W/ 353236168976343322516L/180--------16 Triple SpanASD, W/ 4212852051197754403120L/180------3624122 4 Single SpanASD, W/ 5093262261278157423220L/180----764428199 Double SpanASD, W/ 5333512481429163473623L/180--------23 Triple SpanASD, W/ 64642930517511479584428L/180------523518 22 Single SpanASD, W/ 71745931917911580594529L/180----10259372 513 Double SpanASD, W/ 74148534219512687644931L/180--------31 Triple SpanASD, W/ 902596422242156109806139L/180------70472 420 Single SpanASD, W/ 77049334219212386634831L/180-----7749331 7 Double SpanASD, W/ 77751136220713392685234L/180---------Tri ple SpanASD.

4 W/ 939625445256165115856641L/180-------6232 18 Single SpanASD, W/ 1027657457257164114846441L/180-----10566 4423 Double SpanASD, W/ 1003661466267172120886843L/180---------T riple SpanASD, W/ 12138085733302141491108554L/180-------84 43* Inquire with AEP Span most current versions of literature please , WA Phone: 800-733-4955 Fax: 253-272-0791 Customer Service CentersAll information stated in the product sheet is correct at time of printing and subject to change without notice, check our website for the latest version. 2010-2019 ASC Profiles LLC All rights reserved. ZINCALUME is a registered trademark of BlueScope Steel Ltd. Vintage is a registered trademark of Steelscape, LLC. ColorGuard is a trademark of Steelscape, LLC 0119 Printed in USA (PS162) 150 Inward LoadsSingle SpanNOTES: Top values based on allowable stress (ASD). Bottom values based on a deflection limit of L/180.

5 - denotes that the allowable load is limited by the panel stress vs. deflection conforms to ASTM A653 (Galvanized) or ASTM A792 (ZINCALUME) structural values are for positive (inward) uniform loading are based on the American Iron and Steel Institute Cold Formed Steel Design Manual (AISI S100-12).Refer to for more complete Box Rib performance SpanTriple Spanw, distributed loadL, spanLLwLLLw