CHAPTER 7 SANITARY DRAINAGE - eCodes

1 CHAPTER 7 SANITARY DRAINAGESECTION provisions of this CHAPTER shall govern thematerials, design, construction and installation of sanitarydrainage Sewer building in which plumbing fix-tures are installed and all premises having DRAINAGE piping shallbe connected to a publicly owned or investor-owned sewagesystem, where available, or an approved onsite sewage treat-ment and disposal system in accordance with CHAPTER 64E-6, florida Administrative Code, Standards for Onsite SewageTreatment and Disposal Separate sewer building havingplumbing fixtures installed and intended for human habitation,occupancy or use on premises abutting on a street, alley oreasement in which there is apublic sewershall have a separateconnection with thesewer.

2 Where located on the same lot, mul-tiple buildings shall not be prohibited from connecting to acommonbuilding sewerthat connects to thepublic Sewage or other waste from aplumbing system that is deleterious to surface or subsurfacewaters shall not be discharged into the ground or into anywaterway unless it has first been rendered innocuous throughsubjection to anapprovedform of Damage to DRAINAGE system or public to thepublic sewersystem or to the functioning ofthe sewage-treatment plant shall be treated and disposed of inaccordance with Section 1003 as directed by the code SANITARY DRAINAGE system shall be tested inaccordance with Section connection of a steam exhaust,blowoff or drip pipe shall not be made with the building drain-age system.

3 Wastewater when discharged into the buildingdrainage system shall be at a temperature not higher than 140 F(60 C). When higher temperatures exist,approvedcoolingmethods shall be Engineered SANITARY DRAINAGE sys-tems shall conform to the provisions of Sections and DRAINAGE piping in food service soil orwaste piping shall not be installed above any working, storageor eating surfaces in food service Above-ground SANITARY DRAINAGE and vent soil, waste and vent pipe shall conform to one ofthe standards listed in Table Underground building SANITARY DRAINAGE and building SANITARY DRAINAGE and vent pipeshall conform to one of the standards listed in Table building sewer sewerpipe shall conformto one of the standards listed in Table fittings shall beapprovedfor installationwith the piping material installed and shall comply with theapplicable standards listed in Table Chemical waste chemical waste system shallbe completely separated from the SANITARY DRAINAGE chemical waste shall be treated in accordance with before discharging to the SANITARY DRAINAGE system.

4 Sep-arate DRAINAGE systems for chemical wastes and vent pipes shall2010 florida building CODE DRAINAGE AND VENT PIPEMATERIALSTANDARDA crylonitrile butadiene styrene(ABS) plastic pipe in IPSdiameters, includingSchedule 40, DR 22 (PS 200)and DR 24 (PS 140); with asolid, cellular core orcomposite wallASTM D 2661; ASTM F 628;ASTM F 1488; CSA pipeASTM B 43 Cast-iron pipeASTM A 74; ASTM A 888;CISPI 301 Copper or copper-alloy pipeASTM B 42; ASTM B 302 Copper or copper-alloy tubing(Type K, L, M or DWV)ASTM B 75; ASTM B 88;ASTM B 251; ASTM B 306 Galvanized steel pipeASTM A 53 Glass pipeASTM C 1053 Polyolefin pipeASTM F 1412;CAN/CSA chloride (PVC)plastic pipe in IPS diameters,including schedule 40, DR 22(PS 200), and DR 24 (PS140); with a solid, cellularcore or composite wallASTM D 2665; ASTM F 891;ASTM F 1488; CSA chloride (PVC)plastic pipe with a and a solid, cellularcore or composite wallASTM D 2949, ASTM F 1488 Polyvinylidene fluoride(PVDF) plastic pipeASTM F 1673; steel drainagesystems, Types 304 and 316 LASME florida building CODE PLUMBINGSANITARY DRAINAGETABLE building DRAINAGE AND VENT PIPEMATERIALSTANDARDA crylonitrile butadiene styrene(ABS) plastic pipe in IPSdiameters, including schedule40, DR 22 (PS 200) andDR 24 (PS 140); with a solid,cellular core, or compositewallASTM D 2661; ASTM F 628;ASTM F 1488.

5 CSA pipeASTM C 428 Cast-iron pipeASTM A 74; ASTM A 888;CISPI 301 Copper or copper-alloy tubing(Type K, L, M or DWV)ASTM B 75; ASTM B 88;ASTM B 251; ASTM B 306 Polyolefin pipeASTM F 1412;CAN/CSA chloride (PVC)plastic pipe in IPS diameters,including schedule 40, DR 22(PS 200) and DR 24 (PS140); with a solid, cellularcore, or composite wallASTM D 2665; ASTM F 891;ASTM F 1488; CSA chloride (PVC)plastic pipe with a and a solid, cellularcore, or composite wallASTM D 2949, ASTM F 1488 Polyvinylidene fluoride(PVDF) plastic pipeASTM F 1673;CAN/CSA steel drainagesystems, Type 316 LASME A SEWER PIPEMATERIALSTANDARDA crylonitrile butadiene styrene(ABS) plastic pipe in IPSdiameters, includingschedule 40, DR 22 (PS200) and DR 24 (PS 140);with a solid, cellular core orcomposite wallASTM D 2661; ASTM F 628;ASTM F 1488; CSA butadiene styrene(ABS) plastic pipe in sewerand drain diameters,including SDR 42 (PS 20),PS 35, SDR 35 (PS 45), PS50, PS 100, PS 140, (PS 150) and PS 200;with a solid, cellular core orcomposite wallASTM F 1488; ASTM D 2751 Asbestos-cement pipeASTM C 428 Cast-iron pipeASTM A 74; ASTM A 888;CISPI 301 Concrete pipeASTM C14; ASTM C76;CAN/CSA ;CAN/CSA or copper-alloy tubing(Type K or L)ASTM B 75; ASTM B 88.

6 ASTM B 251 Polyethylene (PE) plastic pipe(SDR-PR)ASTM F 714 Polyvinyl chloride (PVC)plastic pipe in IPSdiameters, includingschedule 40, DR 22 (PS200) and DR 24 (PS 140);with a solid, cellular core orcomposite wallASTM D 2665; ASTM F 891;ASTM F 1488 Polyvinyl chloride (PVC)plastic pipe in sewer anddrain diameters, includingPS 25, SDR 41 (PS 28),PS 35, SDR 35 (PS 46),PS 50, PS 100, SDR 26 (PS115), PS 140 and PS 200;with a solid, cellular core orcomposite wallASTM F 891; ASTM F 1488;ASTM D 3034; CSA ;CSA chloride (PVC)plastic pipe with a and a solid, cellularcore or composite D 2949, ASTM F 1488 Polyvinylidene fluoride(PVDF) plastic pipeASTM F 1673;CAN/CSA steel drainagesystems, Types 304 and316 LASME clay pipeASTM C 4.

7 ASTM C 700 be of anapprovedmaterial that is resistant to corrosion anddegradation for the concentrations of chemicals Lead bends and bends and traps shall not beless than1/8inch ( mm) wall 703 building building sewer pipe near the water thebuilding seweris installed within 5 feet (1524 mm) of the waterservice, the installation shall comply with the provisions ofSection DRAINAGE pipe in filled abuilding sewerorbuilding drainis installed on filled or unstable ground, thedrainage pipe shall conform to one of the standards for ABSplastic pipe, cast-iron pipe, copper or copper-alloy tubing, orPVC plastic pipe listed in Table SANITARY and storm separate systems ofsanitary DRAINAGE and storm DRAINAGE are installed in the sameproperty.

8 The SANITARY and storm building sewers or drains shallbe permitted to be laid side by side in one Existing building sewers and buildingsewers and drains shall connect with newbuilding seweranddrainage systems only where found by examination and test toconform to the new system in quality of material. The code offi-cial shall notify the owner to make the changes necessary toconform to this Cleanouts on building on buildingsewers shall be located as set forth in Section 704 DRAINAGE PIPING Slope of horizontal DRAINAGE drain-age piping shall be installed in uniform alignment at uniformslopes. The minimum slope of a horizontal DRAINAGE pipe shallbe in accordance with Table OF HORIZONTAL DRAINAGE PIPESIZE(inches)MINIMUM SLOPE(inch per foot)21/2or less1/43 to 61/88 or larger1/16 For SI: 1 inch = mm, 1 inch per foot = Change in size of the DRAINAGE piping shall notbe reduced in size in the direction of the flow.

9 A 4-inch by3-inch (102 mm by 76 mm) water closet connection shall not beconsidered as a reduction in Connections to offsets and bases of shall connect to the bases of stacks at a point locatednot less than 10 times the diameter of the drainagestackdown-stream from thestack. Except as prohibited by Section ,horizontal branches shall connect to horizontalstackoffsets ata point located not less than 10 times the diameter of the drain-agestackdownstream from the Future piping for future fixturesshall terminate with anapprovedcap or section contains provisions applicable tojoints specific to SANITARY DRAINAGE ABS between ABS plastic pipe or fittingsshall comply with Sections through florida building CODE DRAINAGETABLE FITTINGSMATERIALSTANDARDA crylonitrile butadienestyrene (ABS) plastic pipein IPS diametersASTM D 2661; ASTM F 628;CSA butadienestyrene (ABS) plastic pipein sewer and draindiametersASTM D 2751 Asbestos cementASTM C 428 Cast ironASME B.

10 ASME B ;ASTM A 74; ASTM A 888;CISPI 301 Copper or copper alloyASME B ; ASME B ;ASME B ; ASME B ;ASME B ; ASME B C 1053 Gray iron and ductile ironAWWA C 110 Malleable ironASME B F 1412; CAN/CSA chloride (PVC)plastic in IPS diametersASTM D 2665; ASTM F 1866 Polyvinyl chloride (PVC)plastic pipe in sewer anddrain diametersASTM D 3034 Polyvinyl chloride (PVC)plastic pipe with a D 2949 Polyvinylidene fluoride(PVDF) plastic pipeASTM F 1673;CAN/CSA steel drainagesystems, Types 304 and316 LASME A B ; ASME B ;ASME B clayASTM C 700 Mechanical joints on drainagepipes shall be made with an elastomeric seal conforming toASTM C 1173, ASTM D 3212 or CSA B602. Mechanicaljoints shall be installed only in underground systems unlessotherwiseapproved.