Transcription of Configuration Manual For SCADA - OPCTechs
1 Configuration Manual For SCADAWinCC Manual For SCADA Table of Contents Table of Contents Chapter 1 wincc 1-1 Set up OPC 1-2 Connect OPC Client to OPC Server through wincc 2 Chapter 1 wincc 3 Configuration Manual For SCADA wincc 1-1 Set up OPC Server Please create tags according to the Configuration Manual .
2 Later, click [ File ] [ Make Active ] to activate new created Configuration file. 4 wincc Configuration Manual For SCADA 1-2 Connect OPC Client to OPC Server through wincc Start SIMATIC wincc Explorer; then click [ File ] [ New ] Select [ Single-User Project ] and then choose [ OK ]. 5 Configuration Manual For SCADA wincc Write down the project name; then click [ Create ].
3 Press the right key on [ Tag Management ] choosing [ Add New ]. 6 wincc Configuration Manual For SCADA Select Press the right key on [ OPC Groups ] selecting [ New Driver ]. 7 Configuration Manual For SCADA wincc Define the name, and click the [ Properties ]. Write down the OPC Server to be connected; then click [ Test Server ].
4 8 wincc Configuration Manual For SCADA Under normal connection Press the right key on OPC selecting [ New Tag ]. 9 Configuration Manual For SCADA wincc Define the tag name and click [ Select ] to define the path. Click [ OK ] after the path is confirmed. 10 wincc Configuration Manual For SCADA Create new picture and add in the tag.
5 Open the item. 11 Configuration Manual For SCADA wincc Choose [ I/O Field ]. Press the right key on the icon and select [ Configuration Dialog ]. 12 wincc Configuration Manual For SCADA View all the tags Select the tag you have created. 13 Configuration Manual For SCADA wincc Run the SCADA program.
6 Under normal condition 14
