Digital Caliper with waterproof scale IP67 ABSOLUTE ...

CRYSTA-Apex S Series

CRYSTA-Apex S Series SERIES 191 — Standard CNC CMM The machine structure has been optimized using FEM (Finite-Element Method) and modal analysis. Temperature compensation system (photo: temperature sensors) Designed and constructed using all Joystick controller Mitutoyo’s experience in CNC CMM technology, CRYSTA-Apex S and Crysta-

  Crysta

Vibration Measuring Instruments - Mitutoyo

Vibration pollution research Machinery foundation research For measuring mainly in the low frequency range below 50Hz where precision measurement of vibration levels to lower than a few 2Gals is required. (m/s=100Gal) Electrokinetic velocity pickup/vibrometer Servo acceleration pickup/vibrometer Various vibration testing Research and development

  Testing, Vibration, Vibration testing

Digital Caliper ABS Digimatic Caliper CD-AX/APX Series

New-series Digimatic calipers born from Mitutoyo’s technologies accumulated for 30 years since development of digital calipers Equipped with the electromagnetic induction type absolute encoder applied for ABS coolant-proof calipers • Patent registered (in Japan, USA, China, Germany, UK, France, Switzerland and India)

  Absolute, Digimatic

Calibrating Measuring Instruments Reference Gages and ...

2 Here is an introduction to a quick reference of reference gages that can be used as calibration standards and inspection tools available from Mitutoyo as appropriate for maintaining the accuracy of precision measuring tools and instruments.

HARDNESS TESTING MACHINES - Mitutoyo

Hardness tester for sponge, rubber, and plastic ... 810-124 125 126 128 127 129 HM-101 102 112 114 122 124 7-10 810-155 AVF-HF 27 810-160 AVK-C0 26 810-163 165 HV-112 114 25 810-200 201 ... we have hardness testing machines, vibration testing systems, and balancing machines; and in the measuring

  Tester, Vibration

Dial Indicators/Dial Test Indicators - Mitutoyo

Dial gage and Digimatic indicator positions Setting the origin of a Digimatic indicator Repeatability in the range of 0.2 mm from the end of the stroke is not guaranteed for Digimatic indicators. When setting the zero point or presetting a specific value, be sure to lift the spindle at least 0.2 mm from the end of the stroke.

  Digimatic

Surftest (Surface Roughness Testers)

In typical surface roughness testers, the taper angle of the stylus end is 60˚ unless otherwise specified. Static Measuring Force Measuring force at the mean position of a stylus: 0.75mN ... The following table lists the relationship between the roughness profile cutoff value λc, stylus tip radius rtip, and cutoff ratio λc/λs.

  Surfaces, Table, Roughness, Surface roughness

Calipers - Mitutoyo

Vernier scale Depth groove Thumbwheel Calipers Inside jaws Vernier Caliper Nomenclature Absolute Digimatic Caliper Special Purpose Caliper Applications How to Read the Scale Graduation 0.05mm (1)Main scale 16 mm (2) Vernier 0.15 mm Reading 16.15 mm Graduation 0.01mm (1)Main scale 16 mm (2)Dial 0.13 mm Reading 16.13 mm

  Caliper, Vernier

QUICK SCOPE - Mitutoyo

Enhanced Image Processing Functions In industry, where the need for high-accuracy non-contact measurement currently increases, high- ... Zoom CMOS color camera Drive method Focus Optical system Image detecting unit Manual all axes ... Sensor Systems

  Image, Industry, Cmos, Sensor

CNC Vision Measuring System QUICK VISION - Mitutoyo

Four-quadrant LED light Workpiece top face Emergency-stop button 4-digit status LED Variable speed control Programmable Ring Light (PRL) Fine control of obliquity and direction provides illumination optimal for measurement. Obliquity* can be arbitrarily set in the range from 0° to 80°.

  Emergency