External cladding - James Hardie
EXTERNAL CLADDING TECHNICAL SPECIFICATION MAy 2014 3 The Heritage profile is a double width board that allows faster wall coverage. The Heritage and Chamfer profiles have rebated edges that
Link to this page:
Documents from same domain
James Hardie Joint Sealant Safety Data Sheet Issue 1 November 2016 Page 2 of 7 November 2016 Product name: James Hardie Joint Sealant P302+P352
Research and Product Development from James Hardie Construction of buildings in bushfire prone areas to AS 3959 2009 Important This technical supplement must be read in conjuction with
James Hardie Product Overview BEST PRACTICE 60 Note Cutting recommendations vary from product to product.Refer to our installation guides or technical specifications for product-specific best practice recommendations.
DECKING CONSTRUCTION TECHNICAL SPECIFICATION SEPTEMBER 2015 3 2.1 FALL Decks must have a fall to facilitate drainage. Decks must have a fall of at least 1 in 100 to avoid ponding.
James Hardie Fibre Cement Products Safety Data Sheet Issue 1 August 2016 Page 2 of 7 August 2016 Product name: James Hardie Fibre Cement Products
conventions for calculating u-values, f-values and -values for metal cladding systems using two- and three- dimensional thermal calculations
Page 2 of 13 Regulations In the opinion of the BBA, Nvelope Rainscreen Cladding Support Systems, if installed, used and maintained in accordance with this Certificate, can satisfy or contribute to satisfying the relevant requirements of the following
Presently used Dry Systems 8 A typical Dry System Disadvantages of using dry pipe fire sprinkler systems compared to a wet system • Increased complexity.