Example: marketing

FiCOM - auto-diagnostics.info

FiCOMUser 2004 2015 SECONS , http: rights reserved. Version 2015-11-06 FiCOM user Ltd. is not connected with Fiat in any read carefully this user manual before using the FiCOM Ltd. is not liable for damages caused by using the using the software please read license , Fiat, Lancia, Alfa Romeo, Innocenti, Maserati and Iveco are registered trademarks of FiatGroup or other and Citroen are registered trademarks of Peugeot Group or other is registered trademark of Ford Motor Company or other trademarks used in this documentation or programs or any other material are used nominatively for identification purposes only and may be property of their respective 2 / 28 Table of Contents 1 Key Software 2 FiCOM software and driver Microsoft Windows operating Microsoft Windows 8 driver GNU/Linux Setting up 3 Diagnostic connectors used in Fiat Iveco OBD-II CAN type OBD-II CAN type OBD-II CAN type 4 Information about Fiat control Fiat ECU naming Communication Diagnostics of Fiat Scudo, Fiat Ulysse, Lancia Z.

FiCOM user manual www.obdtester.com/ficom SECONS Ltd. is not connected with Fiat S.p.A in any way. Please read carefully this user manual before using the FiCOM

Tags:

  Manual, Iatf, Ficom

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of FiCOM - auto-diagnostics.info

1 FiCOMUser 2004 2015 SECONS , http: rights reserved. Version 2015-11-06 FiCOM user Ltd. is not connected with Fiat in any read carefully this user manual before using the FiCOM Ltd. is not liable for damages caused by using the using the software please read license , Fiat, Lancia, Alfa Romeo, Innocenti, Maserati and Iveco are registered trademarks of FiatGroup or other and Citroen are registered trademarks of Peugeot Group or other is registered trademark of Ford Motor Company or other trademarks used in this documentation or programs or any other material are used nominatively for identification purposes only and may be property of their respective 2 / 28 Table of Contents 1 Key Software 2 FiCOM software and driver Microsoft Windows operating Microsoft Windows 8 driver GNU/Linux Setting up 3 Diagnostic connectors used in Fiat Iveco OBD-II CAN type OBD-II CAN type OBD-II CAN type 4 Information about Fiat control Fiat ECU naming Communication Diagnostics of Fiat Scudo, Fiat Ulysse, Lancia Z.

2 Lancia 5 Preparation to 6 FiCOM main Select Control OBD-II Connector 7 Diagnostic Unrecognized Control Control Unit Read fault code Clear Fault Freeze Measured Graph Display Display Save to Actuators ECU Programming/Coding ECU 8 Reporting bugs and improvement How to create Debug How to create ecu 9 Known user 1 IntroductionThank you for purchasing the FiCOM diagnostic interface and software. FiCOM is professional toolfor diagnostics of Fiat vehicles. Please read carefully this User manual before using the hope you'll find our products useful. In case you have any questions, problems or feedbackplease contact as at We're here to help! Key features Support for wide range of ECUs and models Fully multiplexed all-in-one smart interface Wide range of communication protocols and buses covered: KW71, IAW, KWP2000, FIAT9141, ISO15765, UDS.

3 Automatic ECU recognition Automatic vehicle scan ECU Identification Fault code (DTC) reading Fault freeze frame reading Fault code clearing Measured values / live data Live data recording Diagnostic protocol printing Actuator tests Control unit coding such as: Immobilizer key matching Injector coding Parameters resetting The FiCOM system works with Fiat vehicles. (It works as well with Fiat subsidiaries vehicles suchas Ford Ka 2008+, Peugeot Boxer, etc.) The rule of thumb is: tasks related to fault code memoryand identification are reliable everywhere, but measured values and other functions may not be fullysupported. Software updatesUpdates of purchased software version are available for free download User name = serial number of FiCOM diagnostic leave blank.

4 The serial number can be found on a silver label of the interface or insettings of FiCOM after performing Test interface . We recommend you to install updated versionat least once a month, because updates provide support for new ECUs and fix various recommend you to update firmware in diagnostic interface by clicking on Settings Upgradefirmware every time you update the software. Page 4 / 28 FiCOM user 2 FiCOM software and driver installation Microsoft Windows operating FiCOM installation CD to your CD-ROM installation file language for the your destination folder for the FiCOM and click on Install button and after successful installation click on Close drivers are automatically updated during the FiCOM installation. When prompted to install unsigned drivers, click on Install this driver software anyway (Microsoft Windows 7) orContinue Anyway (Microsoft Windows XP).

5 Microsoft Windows will automatically install drivers when you plug-in the FiCOM to USBport. Driver installation isn't required for operation on GNU/Linux 5 / 28 FiCOM user Microsoft Windows 8 driver installationIn case of problem with installing drivers on Windows 8, please follow these steps:1. Press Windows Key + R2. In the window that appears, type: /r /o /f /t 00 3. Press "OK" button4. The System will restart to a "Choose an option" screen5. Select "Troubleshoot" from "Choose an option" screen6. Select "Advanced options" from "Troubleshoot" screen7. Select "Windows Startup Settings" from "Advanced options" screen8. Click on "Restart" button9. System will restart to "Advanced Boot Options" screen10. Select "Disable Driver Signature Enforcement" (press number on keyboard for option shown onscreen)11.

6 Once the system starts, install the diagnostic interface drivers as you would on Windows 7 Windows Vista & 7 required signed all .sys files (we use shipped by Microsoftwith valid digital signature). Final version of Windows 8 requires also signed .inf file (whichis not in our case). The above procedure helps to override unsigned .inf file. Once driver isinstalled, the program will work 6 / 28 FiCOM user GNU/Linux SystemOur diagnostic application are tested to work under Linux. The applications can be rununder Linux, BSD or Apple OS/X on Intel x86 using Wine environment. The installer andapplications perform fully automated installation under these operating system. Requirements Linux with USB support (or FreeBSD) USB CDC Driver Wine Recent Debian Linux or Ubuntu meet the above requirements.

7 Setting up devicesDriver installation isn't required for operation on GNU/Linux system. Diagnosticapplications require access to /dev/ttyACMx devices from Wine environment. This can be set-upvery easily using these commands: ln -s /dev/ttyACM0 ~/.wine/dosdevices/com5ln -s /dev/ttyACM1 ~/.wine/dosdevices/com6ln -s /dev/ttyACM2 ~/.wine/dosdevices/com7ln -s /dev/ttyACM3 ~/.wine/dosdevices/com8 Diagnostic interface should be then visible from the FiCOM diagnostic application. InstallationPrograms can be installed by launching setup .exe file using wine, wine can download the latest version of FiCOM at 7 / 28 FiCOM user 3 Diagnostic connectors used in Fiat vehiclesLocation of OBD2, OBD1 or 3pin diagnostic connectors is available in DLC location database available from the FiCOM main menu.

8 3-pinSome older vehicles (up to 2003) may use 3pin system (Injection, ABS, Airbag, ..) use separateconnector. Special OBD2 to 3pin reduction is available forsuch diagnosis. The 3pin reduction cable has to be connected to batterypositive voltage in order to work with FiCOM (the 3pinconnector does not provide battery voltage).PinDescriptionAL-Line ISO9141 BChassis (ground)CK-Line ISO9141 Iveco 38pinIveco Daily 2001-2006 is using round 38pinAMP connector for diagnostics. Specialmultiplexed diagnostic adapter is required forthese vehicles. Please contact your distributor orvisit for 8 / 28 FiCOM user OBD-II CAN type IStandard OBD2 connector is used since 1997 to approx. 2012 (please note that some models manufactured after 1997 still may use 3pin connector).

9 ISO9141 K Line19 ISO9141 K Line -210 -ISO9141 K Line 311 ISO9141 K LineGround (GND)412 ISO9141 K Line Signal ground (GND)513 ISO9141 K Line FT CAN High 614FT CAN LowISO9141 K Line 715 ISO9141 L-Line ISO9141 K Line816 Battery voltage OBD-II CAN type IIStandard OBD2 connector is used for all vehicles using ISO14229 UDS diagnostic protocol (EP ECUs), Iveco Daily 2006- and some Maserati CAN High 19FT CAN Low -210 -ISO9141 K Line 311 ISO9141 K LineGround (GND)412 ISO9141 K Line Signal ground (GND)513 ISO9141 K Line HS CAN High 614HS CAN LowISO9141 K Line 715 ISO9141 L-Line ISO9141 K Line816 Battery voltagePage 9 / 28 FiCOM user OBD-II CAN type IIIS tandard OBD2 connector is used on all Chrysler-based Fiat Freemont/Dodge Journey) and selected 2015+ Fiat models ( Fiat 500X).

10 FiCOM diagnostic interfaces manufactured before 2016 are not fully capable of diagnosing these CAN High 19FT CAN Low -210 -MS CAN High311MS CAN LowGround (GND)412 AUX CAN HighSignal ground (GND)513 AUX CAN LowHS CAN High 614HS CAN Low715816 Battery voltagePage 10 / 28 FiCOM user 4 Information about Fiat control units Fiat ECU naming terminologyInjection Engine ECU control unitCode immobilizer control unitBody Body Computer (central electronics) Communication protocolsProtocolDiagnostic busProductionKW71 (Bosch)ISO91411991-2001 Marelli IAWM arelli1991-2001 KWP2000,ISO91411996 2011 FIAT9141 ISO91411996 - 2007 ISO15765 CAN-BUS (ISO 11898)2003 - presentUDS (ISO 14229)CAN-BUS (ISO 11898)2005 present Diagnostics of Fiat Scudo, Fiat Ulysse, Lancia Z, Lancia PhedraFiat Scudo, Fiat Ulysse, Lancia Z, Lancia Phedra are not supported by FiCOM .


Related search queries