G1000 SYSTEM MAINTENANCE MANUAL

1 190-00903-00 May 2008 Rev. A G1000 SYSTEM MAINTENANCE MANUAL (LJ/VLJ AIRCRAFT) _____G1000 SYSTEM MAINTENANCE MANUAL Page A-1 190-00903-00 Rev. A Copyright 2008 Garmin Ltd.

2 Or its subsidiaries All Rights Reserved Except as expressly provided herein, no part of this MANUAL may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this MANUAL and of any revision to this MANUAL onto a hard drive or other electronic storage medium to be viewed and to print one copy of this MANUAL or of any revision hereto, provided that such electronic or printed copy of this MANUAL or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this MANUAL or any revision hereto is strictly prohibited.

3 Garmin International, Inc. 1200 E. 151st Street Olathe, KS 66062 USA Telephone: 913-397-8200 Aviation Panel-Mount Technical Support Line (Toll Free): 1-888-606-5482 Garmin Ltd. (Europe) Liberty House, Bulls Copse Road Hounsdown Business Park Southampton, SO40 9RB, p: 44 f: 44 RECORD OF REVISIONS Revision Revision Date Description A 5/7/08 Initial Release DOCUMENT PAGINATION Section Pages Table of Contents i-xii Section 1 1-1 1-2 Section 2 2-1 2-8 Section 3 3-1 3-12 Section 4 4-1 4-10 Section 5 5-1 5-130 Section 6 6-1 6-12 Section 7 7-1 7-34 Section 8 8-1 8-6 Section 9 9-1 9-14 Section 10 10-1 10-14 Appendix A A-1 A-34 _____G1000 SYSTEM MAINTENANCE MANUAL Page i 190-00903-00 Rev.

4 A This MANUAL reflects the operation and configuration of GDU software version The following are general safety precautions that are not related to any specific procedure and therefore do not appear elsewhere in this MAINTENANCE MANUAL . These are recommended precautions that personnel should understand and apply during the many phases of MAINTENANCE and repair. KEEP AWAY FROM LIVE CIRCUITS. MAINTENANCE personnel shall observe all safety regulations at all times. Turn off SYSTEM power before making or breaking electrical connections. Regard any exposed connector, terminal board, or circuit board as a possible shock hazard. Components which retain a charge shall be discharged only when such grounding does not result in equipment damage.

5 If a test connection to energized equipment is required, make the test equipment ground connection before probing the voltage or signal to be tested. DO NOT SERVICE ALONE. Personnel shall not under any circumstances reach into or enter any enclosure for the purpose of servicing or adjusting the equipment without immediate presence or assistance of another person capable of rendering aid. INFORMATION SUBJECT TO EXPORT CONTROL LAWS This document may contain information which is subject to the Export Administration Regulations ( EAR ) issued by the United States Department of Commerce (15 CFR, Chapter VII Subchapter C) and which may not be exported, released or disclosed to foreign nationals inside or outside the United States without first obtaining an export license.

6 The preceding statement is required to be included on any and all reproductions in whole or in part of this MANUAL . _____ Page ii G1000 SYSTEM MAINTENANCE MANUAL Rev. A 190-00903-00 WARNING This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is being provided in accordance with California's Proposition 65. If you have any questions or would like additional information, please refer to the Garmin web site at CAUTION The GDU 1xxx lamps contain mercury and must be recycled or disposed of according to local, state, or federal laws.

7 If you have any questions or would like additional information, please refer to our web site at the following website: CAUTION The GDU 1xxx lens is coated with a special anti-reflective coating which is very sensitive to skin oils, waxes and abrasive cleaners. CLEANERS CONTAINING AMMONIA WILL HARM THE ANTI-REFLECTIVE COATING. It is very important to clean the lens using a clean, lint-free cloth and an eyeglass lens cleaner that is specified as safe for anti-reflective coatings. NOTE The content in this MANUAL is nonspecific and is not associated to any particular aircraft configuration. All display screen shots serve as examples only. NOTE SYSTEM software configuration and operation may differ between different aircraft models.

8 Procedures given in this MANUAL are for general reference only. Always refer to approved OEM aircraft installation and/or MAINTENANCE data for correct software versions/part numbers and procedures for a specific aircraft model when returning an aircraft to service. NOTE At times, to more closely match the LRU nomenclature displayed on the configuration pages, and where appropriate, only the prefix of the LRU will be listed ( , GTX 33(x); GTX, etc.). _____G1000 SYSTEM MAINTENANCE MANUAL Page iii 190-00903-00 Rev. A TABLE OF CONTENTS SECTION 1 INTRODUCTION 1-1 MANUAL Organization .. 1-1 SECTION 2 SYSTEM OVERVIEW G1000 Flight 2-1 Navigation and Communication Systems.

9 2-4 GFC 700 2-5 GDU 1xxx Overview .. 2-6 GDU Communication .. 2-7 SECTION 3 EQUIPMENT DESCRIPTION Displays (MFD/PFD).. 3-1 GDU 1500 .. 3-1 GDU 1040A .. 3-2 GDU 1240A .. 3-2 GMA 1347/1347D Audio Panel .. 3-3 GIA 63/63W Integrated Avionics 3-3 GRS 77 Attitude, Heading, and Reference Unit (AHRS).. 3-4 GMU 44 Magnetometer .. 3-4 GDC 74B Air Data 3-5 GEA 71 Engine/Airframe Unit .. 3-5 GTX 33/33D Transponder .. 3-6 GDL 69/69A Satellite Data Link 3-6 GDL 90 GPS WAAS 3-7 GSA 80/81 AFCS Servos/GSM 85(A) Servo Gearbox.

10 3-7 GWX 68 Weather Radar .. 3-8 GTP 59 OAT Probe .. 3-8 GTX 33/33D Mode S 3-9 GCU 475 MFD Control Unit .. 3-9 GMC 715 AFCS Control Unit .. 3-10 GSD 41 Data Concentrator .. 3-10 GRC 10XM Remote Control .. 3-10 _____ Page iv G1000 SYSTEM MAINTENANCE MANUAL Rev. A 190-00903-00 GRT 10XM Wireless Transceiver .. 3-11 GCU 477 .. 3-11 GSR 56/GDL 59 .. 3-12 SECTION 4 CONFIGURATION MODE 4-1 Configuration Page Groups and Pages .. 4-2 User 4-2 4-2 Secure Digital (SD) Cards .. 4-3 Configuration Files .. 4-5 Configuration File Retention.