Example: bankruptcy

Getting started with your

Getting started with yourGetting started with Silhouette CAMEO Connecting your Silhouette CAMEO Silhouette CAMEO desktop cutting toolA/C adapter and power cableUSB cable1remove foam1 12 cutting matCheck Included ItemsThe Silhouette CAMEO comes with the items shown in the following list. Check that all the items have been included before starting. If you are missing any items listed below, please contact the Silhouette CAMEO from the box and remove the three strips of packing tape and foam support as indicated by the following diagrams. These strips of tape and foam are used to hold the moving parts of the Silhouette in place during bladeremove tapeAutoBladeBluetooth removal toolGetting started with Silhouette CAMEO 232 Install the Silhouette Studio SoftwareInstallation1. Navigate to Click the blue Update Software button at the top of the screen.

To rotate your text, select the text, then click and drag the green circle displayed above the object. 5. Getting Started with Silhouette CAMEO® ... Page Setup button in the options toolbar in the upper right-hand corner of the window. ... Simply place the crosscut blade into the track and slide it across your material in the direction ...

Tags:

  With, Getting, Started, Track, Setup, Circle, Getting started with

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Getting started with your

1 Getting started with yourGetting started with Silhouette CAMEO Connecting your Silhouette CAMEO Silhouette CAMEO desktop cutting toolA/C adapter and power cableUSB cable1remove foam1 12 cutting matCheck Included ItemsThe Silhouette CAMEO comes with the items shown in the following list. Check that all the items have been included before starting. If you are missing any items listed below, please contact the Silhouette CAMEO from the box and remove the three strips of packing tape and foam support as indicated by the following diagrams. These strips of tape and foam are used to hold the moving parts of the Silhouette in place during bladeremove tapeAutoBladeBluetooth removal toolGetting started with Silhouette CAMEO 232 Install the Silhouette Studio SoftwareInstallation1. Navigate to Click the blue Update Software button at the top of the screen.

2 3. Under Silhouette Studio click the download link. Ensure you choose the correct one depending on your operating system (Windows or MAC). FOR WINDOWS: Proceed through the installation process by following the on-screen prompts. If the installation window does not automatically appear, browse to the download in My Computer and double-click the program to run it. If a New Hardware Found dialog box appears, follow the recommended instructions to accept your system s installation of the Silhouette MAC: Drag and drop the Silhouette Studio application icon into the applications folder to install Silhouette Studio .Connect the Silhouette CAMEO Once the Silhouette Studio software is installed, connect the Silhouette CAMEO to the power supply. Then connect the Silhouette to your computer with the included USB cable as shown in the diagram. Turn the machine on by pressing the power button.

3 Follow the touchscreen prompts to select your language and perform initial setup . If your PC displays a New Hardware Found dialog box, follow the recommended instructions to accept your system s installation of the Silhouette The Silhouette CAMEO is Bluetooth compatible and allows wireless communication. The Silhouette CAMEO Bluetooth Edition includes a pre-installed Bluetooth adapter. For all other Cameo editions, Bluetooth is enabled, but you will need to install a Bluetooth adapter. The Bluetooth resides in the bottom of the machine in a compartment accessible by a basic screwdriver. To connect your Bluetooth enabled CAMEO 3, ensure that Bluetooth is activated. You should see a Bluetooth symbol in the upper-left corner of your CAMEO screen. If no symbol is present, activate Bluetooth in the BLUETOOTH menu found within the CAMEO 3 machine settings( ).

4 Select Add Bluetooth from the Silhouette menu found along the top of your Silhouette Studio software. A dialog box will appear displaying Bluetooth devices. Select the CAMEO 3 from the list of devices and the software will begin syncing. After a few seconds, the status of the CAMEO will display as Ready in the SEND TO SILHOUETTE panel and the setup is is off (or no Bluetooth adapter present)Bluetooth is active but not connectedBluetooth is active and connectedNo Symbol( ) Getting started with Silhouette CAMEO NOTE: To change the measurement units from the system to the metric system, choose File -> (Silhouette Studio -> on a Mac ). Under the Measurements section of the preferences dialog box you will find several different units of to Cut with Your Silhouette CAMEO Opening the Silhouette Studio SoftwareLocate the Silhouette Studio icon on the desktop, or in the Start Menu on your PC (in the Applications folder on a Mac ).

5 Double-click the icon to run the Silhouette Studio has loaded, you will notice a blank 12 x 12 page on your you would like to change the page dimensions or orientation, you will find the page setup options already opened in a panel on the right-hand side of the access these page setup options in the future, click the Design Page Settings icon in the options toolbar in the upper right-hand corner of your started with Silhouette CAMEO Select ToolNew DrawingOpenSaveSave to SD CardPrintCopyPasteCutUndoZoom InZoom to Selected AreaFill ColorFill GradientFill PatternLine ColorLine StyleMoveRotateScaleReplicateModifyOffse tPage SettingsRegistration MarksGrid SettingsCut SettingsDesign PageSettings PanelSilhouette Studio Color PreferencePreferencesTe x tAlignDrag ZoomFit to WindowZoom OutRedoSend to SilhouettePixScanPanEffectsAuto TraceSend to SilhouettePoint Edit ToolLine ToolRectangle ToolRounded RectangleEllipse ToolPolygon ToolCurved Shape ToolFreehand ToolText ToolEraser ToolKnife ToolDrawing AreaLibraryOnline StoreGroupUngroupSelect AllDeselect AllDuplicateDeleteBring to FrontSend to BackWeldOffsetShow LibraryShow Library and Drawing AreaSelect by ColorSmooth

6 Freehand ToolArc ToolPolygonToolEmbossStipple4 Getting started with Silhouette CAMEO Drawing Text To cut letters or words using any font on your computer, choose the text tool from the toolbar on the left-hand side of the screen. with the text tool selected, click anywhere on the page and begin clicking on the page with the text tool, a blinking cursor will appear. Begin typing any letters, words, or phrases you you are typing or editing text, the text options panel will appear on the right-hand side of the screen. In this panel you can change the font, text size, weight, justification, character spacing and line spacing. Use the mouse to highlight your text before making adjustments to the font, size, weight, finish typing your text, click anywhere off the page. This will end the text editing mode and deselect the text. If you need to make a change to the text, double-click the text on the page using the Select Tool (found on the left-hand toolbar).

7 To move your text around the page, click and drag it to a new resize your text, select the text and then click and drag one of the corner control rotate your text, select the text, then click and drag the green circle displayed above the started with Silhouette CAMEO Drawing Simple ShapesSilhouette Studio has built-in functions to draw simple shapes such as circles, squares, rectangles, lines, polygons, and freehand line art. Each of these tools can be found in the toolbar on the left-hand side of the Silhouette Studio To draw a line, choose the Line Tool on the left-hand toolbar. Either click and drag with the mouse to draw a line, or click once to start the line and click a second time to SHIFT while creating a line to make a perfectly vertical, horizontal, or 45 To draw a rectangle, choose the Rectangle Tool from the left-hand toolbar. Either click and drag with the mouse to draw a rectangle, or click once to set one corner and click a second time to set the opposite SHIFT while creating a rectangle to make a perfect ALT (OPTION on Mac ) to draw the rectangle from the center instead of one SHIFT + ALT (SHIFT + OPTION on Mac ) to draw a perfect square centered on your original started with Silhouette CAMEO Cutting Your DesignPreparing the Cutting MatRemove the non-stick liner from the cutting your paper or other media on the cutting mat according to the diagram shown in Silhouette Studio.

8 If you don t see an image of the cutting mat under your document on the screen, click the Page setup button in the options toolbar in the upper right-hand corner of the your image on the screen where you want it to cut on the mat. Be sure to keep your design within the red margins on your started with Silhouette CAMEO Preparing the Silhouette to CutTurn the Silhouette CAMEO on by pressing the power button and waiting for the machine to start up. To feed the cutting mat into the Silhouette, lift the lid, align the left edge of the mat with the blue alignment mark on the left side of the machine, press the mat against the white rollers, and press the Load cut mat button on the LOAD a material that has its own backing and does not require a cutting mat (such as vinyl), requires a similar process as above but you should select Load media using a lined material without a cutting mat, you can use the crosscutter on the back of the machine to trim your project after it s done cutting.

9 Simply place the crosscut blade into the track and slide it across your material in the direction indicated on the crosscut blade. The crosscut blade can be found in the storage the Rollers for Smaller MediaBy adjusting the rollers on the main roller shaft, the Silhouette CAMEO can cut the following media sizes: A4, letter, 12 , and 13 .Locate the release lever on the right side and turn it the roller body and roller head and twist into the unlocked position. Slide the roller to the desired position and twist to lock in rollerscrosscut bladeROLLER HEADROLLER BODYINDICATORUNLOCKLOCKG etting started with Silhouette CAMEO BladesDifferent styles of blades are adjusted by different methods. Instructions for adjusting alternate blade types will be included on the blade packaging. In all cases, higher blade settings expose more of the blade and are for cutting thicker materials.

10 Refer to Silhouette Studio for recommended blade settings for different materials. 9 The AutoBlade can adjust automatically according to your software cut settings. To adjust the AutoBlade manually, insert the tip of the blade into the blade adjustment socket as shown. Gently press the Autoblade up and down into the adjustment socket until the red indicator line points to the desired setting. Blade setting14-67-102-3 MaterialThin materials such as vinyl and smooth heat transfer materialThicker materials such as textured cardstock and pattern papersThick materials such as canvasMedium-weight materials such as paper, cardstock and flocked heat transfer materialNOTE: The AutoBlade can only be used in the left tool holder. lock levertooltool holder 1tool holder2 Dual-Carriage SetupThe CAMEO provides a dual-carriage to hold two different tools simultaneously. This allows you to perform a variety of actions during the same job.


Related search queries