Installation Instructions - Moen Incorporated

Moen 3-Function Diverter Valve

® 3-Function Diverter Valve Design multiple-outlet showers with unlimited configurations using the new 3-Function Diverter Valve from Moen. The neutral trim styling of the 3-Function Diverter Valve works with any Moen bath suite of your choice. Pair it with a Moentrol® valve showerhead and a hand shower or body sprays

  Functions, Valves, Moen, Diverter, Diverter valves, Moen 3 function diverter valve

THREE HANDLE TUB AND SHOWER VALVE

DIVERTER DIVERTER BONNET ACRYLIC HANDLE KNOB KIT HANDLE SCREW I.P.S. CONNECTION GROUND JOINT VALVE BODY CENTER PORT STEM EXTENSION WALL TUBE WARNING: Do not solder the threads or apply heat to the valve. Serious internal damage could result. Valve body must be installed with the hot and cold water supply inlets at the …

  Valves, Diverter, Diverter diverter

Specifications - Moen Incorporated

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 1-1/2" (38mm) MAX DECK THICKNESS 8" (203mm) 16"(406mm) CENTERS Quick Connect Hose Assembly CRITICAL DIMENSIONS (DO NOT SCALE) Specifications FOR MORE INFORMATION CALL: 1-800 …

  Specification, Drip

Specifications - Moen Incorporated

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations EVA™ Two Handle Widespread Lavatory Faucet Models: T6420 series Valve: 9000, 69000 NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1-1/8" MIN. DIA.

  Drip

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com. CRITICAL DIMENSIONS (DO NOT SCALE) Rev. 11/18. 6-3/8" (162mm) 3-5/16" (84mm) 2-1/2" (63mm) Max. Optional Escutcheon 6" (152mm) 4-3/16" (106mm) 3" (76mm) 1-9/16" (40mm) 2" (51mm) 3/8" (9.5mm) 5" (127mm) 30" (762mm) Lift Rod. There is more than one version of this model. Page down to ...

  Information, Specification

Specifications - Moen Incorporated

Vessel Extension x2 Back Splash 2-1/2" min for lift rod operation 15" ... Specifications FOR MORE INFORMATION CALL: 1-800-BUY-MOEN Rev. 8/15 www.moen.com There is more than 1 version of this model. Page down to identify the version you have.

  Specification, Vessel

Specifications - Moen Incorporated

10-1/4" x 2-1/2" (260mm x 64mm) ... THROUGH 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA. Specifications TO ORDER PARTS CALL: 1-800-BUY-MOEN www.moen.com CRITICAL DIMENSIONS (DO NOT SCALE) 8/18 There is more than one version of this model. Page down to identify the version you have. FAUCET DESCRIPTION ... • When filling a vessel outside the …

  Specification, Vessel

Illustrated Parts - Moen Incorporated

Hardware Kit 93959 Mounting Hardware 103759 Hardware Package 12715 Rev. 11/18 Valve body Kit 174292 - Hot 174291 - Cold Spout Shank & O Rings 100702 O-Rings (2) 103466 Stem Extension Kit 174290 Cartridge Removal Tool 14272 M•pactSystem Duralock Hose Kit 114299 Pop-Up Plug & Seat 10709 Chrome There is more than one version of this model.

  Hardware, Part, Removal, Illustrated, Illustrated parts

Illustrated Parts

TO ORDER PARTS CALL: 1-800-BUY-MOEN Rev. 10/18 www.moen.com Wand Kit (2.2 gpm) 131380 Chrome 131380CSL Classic Stainless 131380ORB Oil Rubbed Bronze 131380BL Matte Black Wand Kit (1.5 gpm) 161150 Chrome 161150CSL Classic Stainless 161150ORB Oil Rubbed Bronze 161150BL Matte Black 162469SRS Spot Resist Stainless Hose Kit

Illustrated Parts

O-ring Desk Gasket Kit (For single hole mtg only) 174352 Plug Button 151644 Red/Blue 152859 Chrome 152859CSL Classic Stainless 152859SRS Spot Resist Stainless Set Screw (Requires 3/32” hex key) 155023 Cartridge, Cartridge Nut & Set Screw 1255 Pull Out Wand (1.5 gpm) 169246 Chrome 169246SRS Spot Resist Stainless Wand Screen & O-ring Kit (1 ...

  Hole

Protect your home.

Not Covered: Shower heads • shower arms • shower towers/shower panels, multi-head and multi-valve shower systems • fixtures • faucets • Roman tub valves and faucets • bathtubs • sinks • shower enclosures and base pans • caulking and grouting • filters • hose bibs • sewage ejector pumps • toilet seats and lids

  Your, Home, Valves, Shower, Protect, Protect your home, Tub valves

TUB AND SHOWER VALVES - Moen Incorporated

TUB AND SHOWER VALVES Measurements These are shown in the drawings. The depth measurement is critical. Use the front face of the plaster ground as a reference point for the finished wall position, including tile (2-1/16" [52mm]). The center line of the supply

  Valves, Shower, Tub and shower valves

Protect your home.

Apr 07, 2021 · Not Covered: Showerheads • shower arms • shower towers/panels • multi-head and multi-valve shower systems • fixtures • faucets • Roman tub valves and faucets • bathtubs • sinks • shower enclosures and base pans • caulking and grouting • filters • hose bibs • sewage ejector pumps • toilet seats and lids •

  Valves, Shower, Tub valves

ASSE 1016, 1069 & 1070 - Watts

Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations Intended for wall-mounted showers and tub/showers Bather or bather’s attendant has access to flow and final temperature control No further mixing downstream from this device. ASSE 1016 - - 2005

  Valves, 1960, 6110, Shower, 0017, Asse, Asse 1016, 1069 amp 1070

NKBA Bath Planning Guidelines With Access Standards

Shower and tub/shower control valves must be one of the following: pressure balanced thermostatic mixing combination pressure balance/thermostatic mixing valve types (IRC P2708.3) Access Standard Recommended: Bathroom guideline code requirement meets access standard. 12: Shower/Tub Seat

  Valves, Shower

INTERNAL PLUMBING CODE PRESENTATION BASED ON …

408.3 Showers and tub-shower combinations shall be provided with individual control valves of the pressure balance, thermostatic, or combination pressure balance/ thermostatic mixing valve type that provide scald and thermal shock protection and set to deliver a maximum mixed water setting of 120°F. • Water heater thermostats shall not be

  Based, Code, Internal, Presentation, Valves, Shower, Plumbing, Internal plumbing code presentation based on

Tempering Solutions for ASSE 1070 Applications

Section P2713.3 Bathtub and Whirlpool Bathtub Valves “The hot water supplied to bathtubs and whirlpool bathtubs shall be limited to 120ºF (49ºC) by a water temperature-limiting device that conforms to ASSE 1070, except where such protection is otherwise provided by a combination tub/shower valve in accordance with Section P2708.3”

  Valves, Shower

American Burn Association SCALD INJURY PREVENTION …

prone to falls in the bathtub or shower or while carrying hot liquids. ¾ People With Disabilities or Special Needs 1 Moritz, AR, Herriques, FC Jr. Studies of thermal injuries: II The relative importance of time and surface temperature in the causation of cutaneous burns. Am J Pathol 1947; 23:695-720. 2Stone, M, Ahmed J, Evans J. The continuing ...

  Temperatures, Shower