ISOFLEX TOPAS L 32 and ISOFLEX TOPAS L 32 N - …

1 ISOFLEX TOPAS L 32 andISOFLEX TOPAS L 32 NSpecial low-temperature greasesProduct information eEdition TOPAS L 32 andISOFLEX TOPAS L 32 N Synthetic low-temperaturegreases Good corrosion protection Resistant to ageing and oxi-dation Biodegradable acc. toCEC-L 33-A-93 (21 d)> 70 % Especially suitable for smallgears L 32 N contains UV indicatorProduct dataColourbeigeTexturehomogeneous, short-fibredDensity at 20 C, g/cm approx. temperature range*, C- 60 to 130 Drop point, DIN ISO 2176, C> 185 Worked penetration, DIN ISO 2137, at 25 C, mm265 - 295 Consistency, NLGI grade, DIN 518182 Speed factor**, (n x dm)1,000,000 Apparent dynamic viscosity,viscosity grade**LCorrosion protection, DIN 51802(SKF-Emcor), testing period 1 week,distilled water0/1 Water resistance, DIN 51807 , 3h/90 C1 - 90 Flow pressure, DIN 51 805, at - 35 C, mbarmax.

2 450* Service temperatures are guide values which depend on the lubricant's composition, the intended use andthe application method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depen-ding on the mechano-dynamical loads, time, pressure and temperature. These changes in product characteri-stics may affect the function of a component.**Speed factors are guide values which depend on the type and size of the rolling bearing type and the localoperating conditions, which is why they have to be confirmed in tests carried out by the user in each individualcase.

3 ** Kl ber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubri-cating grease; S = heavy lubricating grease; ES = extra heavy lubricating greaseDescriptionISOFLEX TOPAS L 32 and L 32 Nhave been designed for extremelylow temperatures . These greasesconsist of a synthetic hydrocarbonoil and a special lithium L 32 and L 32 N are resi-stant to ageing and oxidation andprovide good corrosion protection aswell as water resistance. ISOFLEXTOPAS L 32 N also contains a UVindicator, which ensures qualitychecking even with minimum quan-tity TOPAS L 32 and L 32 Nare especially suitable for the lubri-cation of small gears used in auto-motive engineering for electricaladjustment mechanisms, win-dow lifters, sun roofs, seats, head-lamps, fan products have been approvedby renowned car manufacturers,such asVolkswagen VW TL 778 ADaimlerChrysler DBL and DBL TOPAS L 32 and L 32 Ncan also be used for.

4 Guideways, bowden cables,door locks Rolling bearings in small motors,fans, pumps Tooth flanks with plastic/plastic( POM, PA and PE) or pla-stic/steel material notesThe lubricant is applied by spatula,brush, grease gun or shelf lifeThe minimum shelf life is approx. 36months if the product is stored in theoriginal closed container in a sizes1 kg can25 kg bucket170 kg drumISOFLEX TOPAS L 32 also in370 g cartridgesISOFLEX TOPAS L 32 and L 32 NSafety Data SheetThe data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to areader with technical experience.

5 It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with theselected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a samplefor testing. Kl ber products are continually improved. Therefore, Kl ber Lubrication reserves the right to change all the technical data in this product information at any timewithout ber Lubrication M nchen KG, a member of the Freudenberg groupPublisher and Copyright:Reprints, total or in part, are permitted if sourceKl ber Lubrication M nchen KGKl ber Lubrication M nchen KGis indicated and voucher copy is 70 10 47, D-81310 M nchenTel.

6 (0 89) 78 76-0, Telefax (0 89) 78 Product name: ISOFLEX TOPAS a) L 32 b) L 32 NCode-No.:a) 004 130 b) 004 227 ber Lubrication M nchen KGEmergency telephone no.:Geisenhausenerstra e 7++49 - 89 7876 - 0D-81379 M nchenTel. ++49 - 89 78 76 - 0 telephone exchangeFax: ++49 - 89 78 76 - / information on ingredientsChemical characterization (preparation): a) & b) Synthetic hydrocarbon oil, lithium soap; b) UV identificationNo particular hazards aid measuresAfter inhalation: Not applicableAfter contact with skin: Wash off with soap and plenty of waterAfter contact with eyes: Rinse with plenty of waterAfter ingestion: Do not induce vomiting.

7 Obtain medical attentionAdvice to doctor: Treat measuresSuitable extinguishing media: Water spray, foam, dry powder,carbon dioxide (CO2)Unsuitable extinguishing media: High volume water jetSpecial Hazards: In case of fire the following can be released: Carbon monoxide, hydrocarbonsSpecial protective equipment for firefighters: Standard procedure for chemical firesAdditional information: Water mist may be used to cool closed containers. In the event of fire and/or explosion do not breathe release measuresPersonal precautions: Not requiredEnvironmental precautions: Do not flush into surface water or sanitary sewer systemMethods for cleaning up / taking up: Use mechanical handling equip- ment.

8 Dispose of absorbed material in accordance with the regulationsAdditional information: and storageAdvice on safe handling: No special handling advice requiredAdvice on protection against fire and explosion: No special precautions requiredRequirements on storage rooms and vessels: Store at room temperature in the original containerIncompatible materials: Incompatible with oxidizing agents. Do not store together with foodFurther information on storage conditions: controls / personal protectionAdditional advice on system design: Not applicableIngredients and specific control parameters: NoneRespiratory protection: No special protective equipment requiredHand protection: Protective glovesEye protection: No special protective equipment requiredBody protection: No special protective equipment requiredOther protection measures: No special protective equipment requiredGeneral protection and hygiene measures.

9 Avoid prolonged and/or repeated contact with skin. Remove soiled or soaked clothing immediately. Clean skin thoroughly after work; apply skin and chemical propertiesFormpasteColourbeigeOdourchara cteristicDrop point> 185 C, DIN ISO 2176 Flash point> 200 C (base oil)Ignition temperaturenot applicableLower explosion limitnot applicableUpper explosion limitnot applicableVapour pressure-firstnot applicableDensityapprox. a) b) g/cm3, 20 CWater solubilityinsolublepH valuenot applicableKinematic viscositynot applicableFurther informationnone10. Stability and reactivityConditions to avoid: NoneMaterials to avoid: Strong oxidizing agentsHazardous decomposition products: None under normal useAdditional information: None11.

10 Toxicological informationThe toxicological data has been taken from products of similar compositionAcute toxicity: LD50/oral/rat = > 2 g/kg (literature data)Chronic toxicity: NoneHuman experience: Prolonged skin contact may cause skin irritation and/or dermatitis12. Ecological informationInformation on elimination (persistence and degradability): Readily biodegradable (> 70%). Test method: CEC-L-33-A93 Behaviour in environmental compartments: Ecological injuries are not known or expected under normal useEcotoxic effects: Aquatic toxicity is unlikely due to low solubility Additional information: Do not discharge product unmonitored into theenvironment13.