Example: biology
LevelRock Floor Underlayment Installation Guide - USG
Properly preparing USG Levelrock and USG Durock™ self-leveling floor underlayment for floor-covering enhances not only the bond between underlayment and floor-covering adhesive, but can create smooth transitions and level floors. USG …
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
USG Fire-Resistant Assemblies Catalog (English) - …
www.usg.com4 USG Fire-Resistant Assemblies Fire Protection USG is the undisputed leader among building material manufacturers in providing products and systems designed to keep people safe from fire.
USG Area Separation Wall Systems Brochure …
www.usg.comArea separation walls between adjoining townhouses must provide fire-resistive ratings to ensure the safety of occupants in adjacent dwellings.
Fire-Resistant Assemblies Brochure (English) - SA100
www.usg.comUser’s Guide Use this brochure to determine fire ratings for CGC products and systems. This brochure provides: — Comprehensive information about fire-rated assemblies
Technical Document Seismic Technical Guide - USG
www.usg.com4 Hanger Wire Attachment Application Anchorage The International Building Code (IBC), through references to ASCE/SEI 7 Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers/Structural Engineering Institute (ASCE/SEI), defines
Technical Document Seismic Technical Guide - USG
www.usg.comTechnical Seismic Technical Guide Document Light Duty Suspension Systems ASTM C6351 addresses the load carrying capability of main tees, categorizing them as Light, Intermediate or Heavy Duty.
CGC SHAFT WALL SYSTEMS - USG
www.usg.comC-H studs in a progressive manner, with gypsum panels, gypsum fiber panels or cement board applied to the face. All details, specifications and data contained in this literature are intended as a …
USG DUROCK BRAND CEMENT BOARD SYSTEMS
www.usg.comSTANDARDS USG Durock® cement board exceeds ANSI standards for cementitious backer units (CBU). See ANSI A118.9 for test See ANSI A118.9 for test methods and specifications for CBU and ANSI A108.11 for interior installation of CBU.
Manual Técnico USG Tablaroca® (Español)
www.usg.comUSG Manual Técnico USG TABLAROCA® USG SHEETROCK® Manejo, almacenaje, especificación, instalación y recomendaciones generales.
0 ICC-ES Evaluation Report ESR-1222 - USG
www.usg.comThe USG suspended ceiling framing systems described in this report are suspended, exposed framing, concealed ceiling assemblies used in fire-rated and non -resistance -
Technical Document Seismic Technical Guide - USG
www.usg.comTechnical Seismic Technical Guide Document Compression Posts USG Donn® Brand Compression Post providesidrig support for a ceiling suspension system in seismic applications. Telescoping compression posts attach to the main tees at each splayed wire location, preventing upward
Related documents
TILE ADHESIVES, MORTARS AND GROUTS
www.custombuildingproducts.comSetting Self-Leveling Underlayment for fills up to 1 inch (25 mm) thick. 2. Custom Building Products LevelQuik® Extended Setting Self-Leveling Underlayment for fills up to 1 inch (25 mm) thick. 3. Custom Building Products LevelLite® Self-Leveling Underlayment for fills up to 2 inches (51 mm) thick. 4. Custom Building Products LevelQuik® Latex
LEVELQUIK SELF-LEVELING UNDERLAYMENT RATED FOR …
images.thdstatic.comLevelQuik ® RS Rapid Setting Self-Leveling Underlayment has been rated by the Tile Council of America (TCA) for use as part of a ceramic tile installation system for plywood subfloors with 24" o.c. joists. With proper installation of the flooring system, the use of LevelQuik® RS can achieve an “Extra Heavy” rating
RODUCT NO 1249-50, 51 - QUIKRETE
www.quikrete.comQUIKRETE Self-Leveling Floor Resurfacer (No. 1249-50) & Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) are self-finishing floor toppings and underlayment specially formulated to work without troweling 03 54 16 Hydraulic Cement Underlayment DIVISION 3 2
Schluter -DITRA Installation Handbook 2020
pdf.lowes.comunderlayment – minimum 11/32", 3/8" nom. (10 mm-thick Exposure 1, plugged-face ) plywood or OSB with 1/8(3 mm) gap " between sheets; see page 17 for underlayment installation guidelines any leveling of the assembly must be done prior to installing DITRA and DITRA-XL Movement Joints DITRA and DITRA-XL do not eliminate the
Schluter -DITRA-HEAT Installation Guide
resources.schluter.comunderlayment – minimum 11/32", 3/8" nom. (10 mm)-thick Exposure 1, plugged-face plywood or OSB with 1/8" (3 mm) gap between sheets; see page 9 for underlayment installation guidelines. any leveling of the subfloor must be done prior to installing DITRA-HEAT and DITRA-HEAT-TB. Movement Joints DITRA-HEAT and DITRA-HEAT-TB do not
INSTALLATION INSTRUCTIONS - Shaw Floors
smartcorefloors.comapplication. If installed over a second underlayment, this underlayment cannot be greater than 3 mm thick. IIC (ASTM E492-09) and STC (ASTM E90-09) lab testing on certain WPC/SPC products tested with and without a second layer of underlayment, to date, does not indicate that a second underlayment will provide additional acoustic benefit. II.
Shaw 4151 Universal Performance Adhesive
www.shawproshop.comWood Association approved wood underlayment and subflooring. See Resilient Wood Substrate Information Sound and properly prepared concrete (on, above or below grade), metal, wood fiberglass and terrazzo. Existing resilient products should be over 1 year old, secure and fully adhered with a full spread of adhesive. Remove
Schluter -Shower System Installation Handbook 2020
pdf.lowes.com2 1 4 4 6 7 9a 10 11 13 5 5 12 6 3 8a 6 SHOWER ASSEMBLY — Schluter®-KERDI waterproofing membrane K-SH-K-20 Schluter®-KERDI waterproofing membrane Showers – Ceramic or stone tile SHOWER ASSEMBLY Ceramic or stone tile Schluter SET®, Schluter ALL-SET®, Schluter ®FAST-SET or unmodified thin-set mortar