Example: stock market
Light-Emitting Diodes (LEDs) - learn.sparkfun
The following few rows are of less importance for the purposes of this tutorial. The reverse voltage is a diode property that you shouldn't have to worry about in most cases. The power dissipation is the amount of power in milliWatts that the LED can use before taking damage. This should work itself out as long as you
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Series and Parallel Circuits - learn.sparkfun
learn.sparkfun.comSeries and Parallel Circuits a learn.sparkfun.com tutorial Available online at: http://sfe.io/t81 Contents Series and Parallel Circuits Series Circuits Parallel Circuits
Resistors - learn.sparkfun
learn.sparkfun.comSurface mount resistor decoding ... SMD resistors have their own value-marking system. Decoding the Color Bands Through-hole, axial resistors usually use the color-band system to display their value. Most of these resistors will have four bands of color circling the resistor.
How to Use an Oscilloscope - learn.sparkfun
learn.sparkfun.comBasics of O-Scopes The main purpose of an oscilloscope is to graph an electrical signal as it varies over time. Most scopes produce a two-dimensional graph with time on the x-axis and voltage on the y-axis.
How to Use a Multimeter - learn.sparkfun
learn.sparkfun.comThe first digit on many multimeters is only able to display a '1' so the ranges are limited to1 9.99 instead of 99.99. Hence the 20V max range instead of 99V max range. Warning! In general, stick to DC circuits (the settings on the multimeter with straight lines, not curvy lines).
Serial Peripheral Interface (SPI) - learn.sparkfun
learn.sparkfun.comProgramming for SPI Resources and Going Further Introduction Serial Peripheral Interface (SPI) is an interface bus commonly used to send data between microcontrollers and small peripherals such as shift registers, sensors, and SD cards. It uses separate clock and data lines, along with a select line to choose the device you wish to talk to.
How to Read a Schematic - learn ... - SparkFun Electronics
learn.sparkfun.comOverview Schematic Symbols (Part 1) Schematic Symbols (Part 2) Name Designators and Values Reading Schematics Resources and Going Further Overview Schematics are our map to designing, building, and troubleshooting circuits. Understanding how to read and follow schematics is an important skill for any electronics engineer.
Related documents
5 examples of discrete and continuous variables
citronel.comcharacteristic. So, the quantitative characteristic is known as a variable. Here in this article, we are going to talk about the discrete and continuous variable. Content: Discrete Variable Vs Continuous Variable Comparison Chart Definition Key Differences Examples Conclusion Comparison Chart Basis for ComparisonDiscrete VariableContinuous