Mobile Gate - Eaton

1 Mobile gate MBR110. Filler Breather Assemblies Mobile - gate reservoir Features/Benefits: Eaton Mobile - gate . breather filters out particles Proprietary Media: Breather Assemblies and moisture before it contami- Reduces dew point provide low cost, high nates the oil. Hydraulic reser- temperature to prevent efficiency protection against condensation and is voirs breathe air in and out efficient in blocking particles airborne moisture and as the oil level rises and falls. 10 and larger. particulate contamination. Part Number: 5002486 This air contains particles and Water Regeneration: Patented technology elimi- water.

2 Particles sand blast Regenerates its water nates moisture condensation your machinery and water holding capacity with each in hydraulic system reser- attacks your oil and compo- cycle. voirs. Moisture is prevented nents. The Mobile - gate reser- Reversible Flow Through from entering and is actually Media: Allows for moisture voir breather filters out parti- to exit the reservoir. pumped out with each cles and moisture. Protect Easy Installation: flow cycle. The media regen- your hydraulic system with a Lightweight design; only erates its water holding filter.

3 Needs to be hand tightened. capacity with every oil return Rugged Housing: Protects phase, ensuring long service MBR120 the media from external life. splashing. SPECIFICATIONS. PART NUMBER FLOW DIMENSIONS (in). gpm lpm D1 D2 D3 D4 H1 H2 T1. MBR110 125 475 - - NPT 3/4. MBR120 125 475 - D1 D1. Part Number: 5002487 H1 D3. H1. D4. H2. T1 H2. D2. Part Numbers: NPT Mobile - gate MBR110. Flange Mobile - gate MBR120. Exhalation Inhalation Performs as a gate Works even when the Reduces humidity inside During the inhalation cycle, system is shut down.

4 Reservoir. the Mobile - gate proprietary The Mobile - gate Vent The Mobile - gate Vent media blocks the water vapor Breather retards the vapor Breather lowers and stabilizes from entering the reservoir. equilibrium process and the relative humidity of air During the exhalation works to prevent condensa- inside the reservoir, leading to cycle, the media allows the tion even after the system is a lower dewpoint (Tdewpoint moisture in the reservoir air shut and cooled down, such < Tambient = NO CONDEN- to exit. The moisture is car- as overnight.)

5 As this chart SATION) at a rate and amount ried off the media by the illustrates, the dewpoint is that will be dependent upon exiting air, restoring the slow to climb, even after the several conditions: the ambi- media's water barrier capaci- system temperature has ent conditions, the internal ty, and the moisture barrier dropped to the ambient tem- reservoir heat, amount and mechanism is not affected by perature. Once the system frequency of reservoir air flow the amount of exposure to has reached ambient temper- through the vent, and the moisture.

6 The reservoir ature, condensation does temperature of the reservoir air is maintained at a low not occur. surfaces. relative humidity, and more importantly, at a lower dew point temperature than the ambient temperature. Eaton Eaton Eaton 14615 Lone Oak Road 20 Rosamond Road Eaton Fluid Power GmbH. Eden Prairie, MN 55344 Footscray 1. USA Victoria 3011 D-76532 Baden-Baden, Germany Tel: 952 937-9800 Australia Tel: +49 (0) 7221 682-0. Fax: 952 974-7722 Tel: (61) 3 9319 8222 Fax: +49 (0) 7221 682-788. Fax: (61) 3 9318 5714. 2004 Eaton Corporation All Rights Reserved Printed in USA.

7 Document No. V-FIFI-MS003-E. November 2004.