Operation Guide 3198/3299 - support.casio.com

1 Operation Guide 3198/3299E-9 Changing the Current Home City Time and Date Settings1. Use D to display the current Home City Time (T-1) Hold down A until the seconds start to flash, whichindicates the setting Press C to move the flashing in the sequence shownbelow to select other CodeHourYear12/24-Hour Format MinutesIllumination Duration Setting DSTDayMonth4. When the setting you want to change is flashing, use D and B to change it asdescribed While the Home City Time (T-1) screen is displayed, pressing A will switch the dayof the week / month-day indication to the currently selected Home City code and theT-1 indicator for about one second.

2 You can change the current time setting for your Home City Time (T-1) only. For Local Times (T-2, T-3, T-4), you only can change the city code and DST Between Time ScreensEach press of D cycles the time screens in the sequence shown for one timekeeping Mode s Multi Time feature gives youquick and easy access to the current time and date in fourdifferent cities, numbered from T-1 (Time 1) through T-4(Time 4). T-1 is your Home City Time, and T-2, T-3, andT-4 are Local Times. Local Times are kept insynchronization with your Home City Time (T-1). The digital dial at the top of the screen indicates thecurrent Home City Time (T-1). For details on reading themap and digital dial, see Map and Digital Dial (pageE-30).

3 Seconds Day of week Month Day Hour : Minutes PM indicator Map Digital dial E-5 Alarm ModeCountdown Timer ModeStopwatch ModeE-4 General Guide Press C to change from mode to mode. In any mode (except when a setting screen is on the display), press B to illuminatethe ModeWorld Time ModePress .E-3To turn an alarm on and off .. E-23To turn the Hourly Time Signal on and off .. E-24To configure the countdown timer .. E-26To use the countdown timer .. E-27To measure times with the stopwatch .. E-29To turn the button Operation tone on and off .. E-32To turn off Auto Display .. E-35To turn on Auto Display .. E-35E-2 Procedure LookupThe following is a handy reference list of all the operational procedures contained inthis toggle the timekeeping Mode time between DST and Standard Time.

4 E-12To turn on illumination .. E-15To view the time for another city code .. E-16To toggle a city code timebetween Standard Time and Daylight Saving Time .. E-17To change your Home Time city to the current World Time city .. E-18To set an alarm time .. E-20To test the alarm .. E-22E-1 ContentsGeneral Guide .. E-4 timekeeping .. E-6 World Time .. E-16 Alarms .. E-19 Countdown Timer .. E-25 Stopwatch .. E-28 Reference .. E-30 Specifications .. E-36 EAbout This Manual The operational procedures for Modules 3198 and 3299 are identical. All of theillustrations in this manual show Module 3198. Button operations are indicated using the letters shown in the illustration.

5 Each section of this manual provides you with the information you need to performoperations in each mode. Further details and technical information can be found inthe Reference 3198 Module 3299MA1205-EAOperation Guide 3198/3299E-19 AlarmsYour watch has a total of five alarms, each of which youcan configure as a daily alarm or one-time alarm. Daily Alarm: Sounds at the preset time each day. One-time Alarm: Sounds once at the preset time andthen is disabled can also turn on an Hourly Time Signal that causesthe watch to beep twice every hour on the hour. All of the operations in this section are performed in theAlarm Mode, which you enter by pressing C (pageE-5).

6 Alarms operate in coordination with the current HomeCity time (Hour : Minutes) Alarm number Alarm on indicator E-18To change your Home Time city to the current World Time city1. In the World Time Mode, use D to display the city you want to make your newHome Time Press A and B at the same time. This makes the World Time city you selected in step 1 your new Home Time toggle a city code time between Standard Time and Daylight Saving Time1. In the World Time Mode, use D (east) to display thecity code (time zone) whose Standard Time/DaylightSaving Time setting you want to Hold down A for about one second to toggle DaylightSaving Time (DST displayed) and Standard Time (DSTnot displayed).

7 The DST indicator is on the display whenever youdisplay a city code for which Daylight Saving Time isturned on. Note that the DST/Standard Time setting affects only thecurrently displayed city code. Other city codes are notaffected. Note that you cannot switch between Standard Timeand Daylight Saving Time while UTC is selected as thecity indicator E-16 World TimeWorld Time shows the current time in 48 cities (31 timezones) around the world. All of the operations in this section are performed in theWorld Time Mode, which you enter by pressing C(page E-4).To view the time for another city codeIn the World Time Mode, press D to scroll eastwardlythrough city codes.

8 For full information about city codes, see the City CodeTable at the back of this manual. If the current time for a city is wrong, check yourTimekeeping Mode time and time zone settings andmake the necessary time and date in the zone of the selected city code City code E-15To turn on illuminationIn any mode (except when a setting screen is on the display), press B to turn onillumination. You can use the procedure above to select either seconds or 3 seconds as theillumination duration. When you press B, the illumination will remain on for seconds or 3 seconds, depending on the current illumination duration Your Home City TimeUse the following procedure to change your current Home City Time to any one of thethree Local In the timekeeping Mode, press D to display the Local Time which you want tomake your Home City Press A and B at the same time.

9 This makes the Local Time you selected in step 1 your new Home City LED (light-emitting diode) illuminate the display for easy reading in the Precautions The illumination provided by the light may be hard to see when viewed under directsunlight. Illumination automatically turns off whenever an alarm sounds. Frequent use of illumination runs down the Format With the 12-hour format, the PM indicator appears to the left of the hour digits fortimes in the range of noon to 11:59 and no indicator appears to the left of thehour digits for times in the range of midnight to 11:59 With the 24-hour format, times are displayed in the range of 0:00 to 23:59, withoutany indicator.

10 The 12-hour/24-hour timekeeping format you select in the timekeeping Mode isapplied in all other the City Setting of a Local TimeYou can select any one of the city codes in the table at the back of this manual as aLocal Time Display the Local Time whose city setting you want to change, and then hold downA for about two seconds until the current city code starts to Use D (east) and B (west) to select the city code you Press C to display the DST setting Press D to toggle between Daylight Saving Time ( displayed) and StandardTime ( displayed).5. After the settings are the way you want, press toggle the timekeeping Mode time between DST and Standard Time1.