Product Data Sheet November 2017 Magtech …

1 Product data SheetNovember 201700813-0100-4430, Rev ABMagtech magnetic Level Indicators Visual level indication to 100 ft. (30 m) Designed to ASME Process Piping Code. ASME Power Piping Code is available upon request Minimal leak points as compared to sight glasses No process liquid in contact with indicator glass Designed for both gas/liquid (top level) and/or liquid/liquid (interface) measurements Optional construction is available for cryogenic, high-temperature, high-pressure, and corrosive applications Dual chamber design optimized for use with the Rosemount 5300, 3308, and 3300 Guided Wave Radars also available2 Magtech magnetic Level IndicatorsNovember principleMagnetic level indicators consist of a chamber, a magnet equipped float which rises and lowers with the fluid level, and an indicator mounted to the indicator houses a column of small flags, which indicate the level of the fluid in the chamber, based on the position of the float. As the fluid level rises and lowers, the float rises and lowers as well, and the flags are tripped from one orientation to the other; typically the red side indicates the liquid level and the silver side indicates the vapor the float rises and falls with the process level, tripping the flags, it also stimulates any attached transmitters and switches, providing a signal back to the control Examples Turbulent tanks Heat exchangers Boiler applications Site glass replacement Separators Acid storage tanksTest and inspectionAll Magtech chambers can be hydrostatically tested to times the specified flange/pressure rating prior to shipment to ensure pressure testing and documentation, such as Material Traceability Reports (MTRs), radiography, hydrostatic pressure tests, Postive Material Identification (PMI), dye penetrant, NACE , or witness testing are.

2 2 Ordering Information .. 3 Specifications ..15 Dimensional Drawings ..17 Vent IndicatorFloatFloat chamberDrain flange Processconnections3 Magtech magnetic Level IndicatorsNovember InformationMagtech magnetic Level indicator (MLI)Specification and selection of Product materials, options, or components must be made by the purchaser of the equipment, see Magtech Level indicator Quick data Sheet . For more information on Material Selection see page 15 Additional InformationSpecifications: page 15 Dimensional Drawings: page 17 Table 1. Magtech magnetic Level Indicators Ordering InformationModelProduct descriptionLMagnetic level indicatorMeasurement type(1)0 Liquid level (gas/liquid interface)2 Submerged interface (liquid/liquid interface)4 Flashing application (consult factory for model selection)Float selectionLiquid level (gas/liquid interface) applications, measurement type code 0 Float materialMinimum SGFloat max. operatingpressure in psig (bar)at 100 F ( C)Chamber size and schedule A Dimension in inches (mm)76316 Stainless steel ( )2-in.

3 (305 mm)78316 Stainless steel ( )2-in. (305 mm)81316 Stainless steel ( )2-in. (305 mm)58316 Stainless steel ( )21/2-in. (305 mm)60316 Stainless steel ( )21/2-in. (305 mm)62316 Stainless steel ( )21/2-in. (305 mm)83316 Stainless steel ( )21/2-in. (305 mm)86316 Stainless steel ( )21/2-in. (305 mm) ( )21/2-in. (305 mm) ( )21/2-in. (305 mm) ( )21/2-in. (305 mm)68316 Stainless ( )21/2-in. (305 mm)82316 Stainless ( )21/2-in. (305 mm)87316 Stainless steel ( )21/2-in. (305 mm)88316 Stainless ( )21/2-in. (305 mm)4 Magtech magnetic Level IndicatorsNovember materialMinimum SGFloat max. operating pressure in psig (bar)Chamber size and schedule A Dimension in inches (mm)40316 Stainless ( )3-in. S1018-in. (457 mm) ( )21/2-in. S4016-in. (406 mm) ( )21/2-in. S4020-in. (508 mm) ( )3-in. S1020-in. (508 mm) ( )3-in. S4014-in. (356 mm) ( )3-in. S4017-in. (432 mm) ( )3-in. S4020-in. (508 mm) ( )3-in. S4025-in. (635 mm) ( )3-in.

4 S8020-in. (508 mm) ( )3-in. S8025-in. (635 mm) ( )3-in. S16016-in. (406 mm) ( )3-in. S16020-in. (508 mm)64 Alloy ( )3-in. S1012-in. (305 mm) ( )2-in. S1012-in. (305 mm) ( )2-in. S1012-in. (305 mm)Submerged interface (liquid/liquid interface) measurement type code 2 Float materialMinimum delta SGFloat max. operatingpressure in psig (bar)at 100 F ( C)Chamber diameter and schedule A Dimension in inches (mm)37316 Stainless ( )2-in. S1012-in. (305 mm)21316 Stainless ( )21/2-in. S1012-in. (305 mm)23316 Stainless ( )21/2-in. S4012-in. (305 mm)10316 Stainless ( )3-in. S1012-in. (305 mm) ( )21/2-in. S4012-in. (305 mm) ( )21/2-in. S4012-in. (305 mm) ( )3-in. S1012-in. (305 mm) ( )3-in. S40 12-in. (305 mm) ( )3-in. S4012-in. (305 mm) ( )3-in. S8012-in. (305 mm) ( )3-in. S16012-in. (305 mm) ( )2-in. S1012-in. (305 mm)13 Alloy ( )3-in. S1012-in. (305 mm) Table 1. Magtech magnetic Level Indicators Ordering Information5 Magtech magnetic Level IndicatorsNovember style (see Figure 1 for mounting options or consult factory for custom mounting)AStyle A - Flanged top and bottom, with stop plates, no side process connectionBStyle B - Access flange on top and bottom with side process connectionsCStyle C - Access flange on bottom, flanged bottom with side(s) process connectionDStyle D - Access flange on top, flanged top, closed bottom with side(s) process connectionLStyle L - No float access flanges, with or without side(s) process connectionInstrument ratingAAANSI/ASME Class 150 ABANSI/ASME Class 300 ACANSI/ASME Class 600 ADANSI/ASME Class 900 AEANSI/ASME Class 1500 AFANSI/ASME Class 2500 Access flange type0 Not applicable (Style L only)1 Raised Face (RF) Weld Neck2RF Slip-On3RF Socket Weld4 Ring Type Joint (RTJ) Weld Neck5 RTJ Slip-ON6 RTJ Socket WeldIndicator scale unit of measureEImperial (English)

5 , inchesMMetric, millimetersMounting dimension (center-to-center for style B, C, D, L and top-to-bottom for style A)(2) inches or XXXXX mm04863 = inches or 4863 mmChamber materialS316/316L Stainless steel (standard)1317 Stainless steel2321 Stainless steel7347 Stainless steelXSpecial (consult factory) Table 1. Magtech magnetic Level Indicators Ordering Information6 Magtech magnetic Level IndicatorsNovember process connection designDDrill (1/2-in. hole)FDrill (full bore)(2)EExtrusion (limited to chamber size S10 or S40 with 11/2-in. or 2-in. NPS process connection size)(2)TButtweld Tee (ASME )NNone (Style A)XSpecial (consult factory)Process connection size (NPS)0 Same diameter as chamber (Style A only)81/2-in. 93 (consult factory)Process connection ratingProcess connection typeZZSame as instrument rating (Style A only) ZAAANSI/ASME Class 150 1, 2, 3, 4, YABANSI/ASME Class 300 1, 2, 3, 4, YACANSI/ASME Class 600 1, 2, 3, 4, YADANSI/ASME Class 900 1, 2, 3, 4, YAEANSI/ASME Class 15001, 2, 3, 4, YAFANSI/ASME Class 25001, 2, 3, 4, YFAANSI/ASME Class 3000A, C, E, G, H, K, LFBANSI/ASME Class 6000A, C, E, G, H, K, LFCANSI/ASME Class 9000A, C, E, G, H, K, LSAANSI/ASME STDM, P, NSBANSI/ASME XSM, P, NSCANSI/ASME XXSM, P, N Table 1.

6 Magtech magnetic Level Indicators Ordering Information7 Magtech magnetic Level IndicatorsNovember connection typeProcess connection ratingZSame as access flange (Style A only)ZZ1RF Weld neckAA, AB, AC, AD, AE, AF2RF Slip-onAA, AB, AC, AD, AE, AF3RF Socket weldAA, AB, AC, AD, AE, AF4 RTJ Weld neckAA, AB, AC, AD, AE, AF5 RTJ Slip-onAA, AB, AC, AD, AE, AF6 RTJ Socket weldAA, AB, AC, AD, AE, AFYR aised face lap joint (RFLJ)AA, AB, AC, AD, AE, AFAN ipple - Plain endFA, FB, FCCN ipple - Male NPTFA, FB, FCEC oupling - Female NPTFA, FB, FCGC oupling - SWFA, FB, FCHF ittingFA, FB, FCKF ittingFA, FB, FCLF ittingFA, FB, FCMF itting - Plain EndSA, SB, SCPF itting - Beveled End ( )SA, SB, SCNF itting - Male NPTSA, SB, SCProcess connection schedule(3)0 Same schedule as chamber (Style A only)1S104S408S806S160 Process connection material0 Same Material as ChamberS316/316L Stainless steel (standard)2321 Stainless steel 7347 Stainless steel 4304/304L Stainless steel 1317 Stainless steel CCarbon steelXSpecial (consult factory) Table 1.

7 Magtech magnetic Level Indicators Ordering Information8 Magtech magnetic Level IndicatorsNovember p o f t h e ch a m b e r BBlind flangeDDome capFFlat capZOpen flange with stop plateXSpecial (consult factory)To p ve n t s ize0No top vent81/2-in. 93 (consult factory)Top vent typeZNo top ventANPT tap only with PlugCSW tap onlyDFlangedFCoupling - FNPT with PlugHCoupling - SWKF itting - Plain EndMFitting- Male NPT EndXSpecial (consult factory)Top vent schedule or rating Z(4)No top vent1S104S408S806S1603 Class 30005 Class 6000 Bottom of the chamberBBlind flangeDDome capFFlat cap Table 1. Magtech magnetic Level Indicators Ordering Information9 Magtech magnetic Level IndicatorsNovember flange with stop plateXSpecial (Consult Factory)Bottom drain size0No bottom drain81/2-in. 93 drain typeZNo bottom drainANPT tap only with plugCSW tap onlyDFlangedFCoupling - FNPT with plugHCoupling - SWKF itting- Plain endMFitting- Male NPT endXSpecial (consult factory)Bottom drain schedule or rating ZNo bottom drain1S104S408S806S1603 Class 30005 Class 6000 indicator FFlagBFollower (birdie/shuttle)Measuring range(5) inches or XXXXX mm04863 = inches or 4863 mmScale unitsZFeet and inches (1/2-in.)

8 Increments)AMetric (5 mm increments)BPercentage (custom increments) Table 1. Magtech magnetic Level Indicators Ordering Information10 Magtech magnetic Level IndicatorsNovember only (1/2-in. increments)D+/- (custom increments)EDual (feet and inches, percent)FDual (metric, percent) indicator enclosure material0 Anodized aluminum housing with glass1 Anodized aluminum housing with polycarbonate2 Anodized aluminum housing with acrylic frost extension3 Stainless steel housing with glass4 Stainless steel housing with polycarbonate5 Stainless steel channel with glass tube6 Stainless steel channel with polycarbonate tubeIndicator indicator color ZRed and silver flagsARed and white flagsCYellow and black flagsBRed followerDGreen followerIndicator mounting (see Figure 2)ZStandard orientation (180 from process connections)RRight mountLLeft mountCCustomer specifiedTypical model number: L 0 76 C AA 1 E 03600 S E 6 AA 1 1 S D 8 Z Z B 8 Z Z F 03600 Z 0 Z flashing applications please consult mounting dimension per single unit is 20 ft.

9 (6 m) for Style A and 18 ft. ( m) for Style B/C/D. connection schedule needs to be equal or greater than the chamber select for Top Vent type Z Option be equal to or smaller than the Mounting dimension. Please provide datum offset using Magtech Level indicator Quick data Sheet . Table 1. Magtech magnetic Level Indicators Ordering Information11 Magtech magnetic Level IndicatorsNovember options - must be specified at time of orderTest and inspection Hydrostatic pressure test Weld inspection NDE (non-destructive examination)Documentation Approval and as-built drawings Weld procedures and welder qualifications Quality control plans Material Traceability Record (MTR) Float curvesAccessories Valves (vent and drain) Insulation blanket Steam trace Heat trace Hard shell cryogenic insulation with frost protection Chamber support clipsAssociated products Dual chamber unit with Guided Wave Radar Switches Magnetostrictive transmitter12 Magtech magnetic Level IndicatorsNovember Table 2.

10 Process Connection RatingANSI/ASME connection style15030060090015002500300060009000 STDXSXXSRF Weld NeckXXXXXXRF Slip-onXXXXXXRF Socket WeldXXXXXXRTJ Weld NeckXXXXXXRF Lap Joint (RFLJ)XXXXXXF itting - Plain EndXXXF itting - Male NPTXXXC oupling - Female NPTXXXC oupling - SWXXXF ittingXXXF ittingXXXF ittingXXXF itting - Plain EndXXXF itting - Beveled End ( )XXXF itting - Male NPTXXX13 Magtech magnetic Level IndicatorsNovember 1. Mounting StylesStyle AFlanged top and bottom, no side process connection(s)Style BFlanged top and bottom with side process connection(s)Style CClosed top, flanged bottom with side process connection(s)Style DFlanged top, closed bottom with side process connection(s)Style LClosed top and bottom with or without side process connection(s)14 Magtech magnetic Level IndicatorsNovember 2. indicator /Scale OrientationMagtechRight mountProcess connectionLeft mountStandard orientation Standard orientation Top viewFront view15 Magtech magnetic Level IndicatorsNovember specificationsResolutionApproximately 1/4 -inch resolutionMeasuring range Maximum mounting dimension per single unit is 20 ft.