Example: marketing
PRODUCT SELECTION GUIDE - Johns Manville
Micro-Lok® HP Plain is a pre-formed fiberglass pipe insulation manufactured using a state-of-the-art, in-line manufacturing process, creating a highly consistent fiberglass core for reliable, optimized performance during both installation and operation. The insulation may be used on hot or cold pipe systems in concealed or exposed applications for
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
IIG Product Selector Guide - jm.com
www.jm.comMinWool-1200® Field-Formed Pipe Mineral Wool Insulation AVAILABLE SHAPES AND SIZES Standard Thickness Single Layer: 1½-4” thick Double Layer: Over 4” …
Mineral Wool Insulation - Johns Manville
www.jm.comSAFETY DATA SHEET 200000002057 Mineral Wool Insulation Version 2.1 Revision Date 02/26/2018 Print Date 02/26/2018 3 / 6 US/EN Materials to avoid
EXPAND-O-FLASHEXPANSION JOINT COVER
www.jm.comEXPAND-O-FLASH ® EXPANSION JOINT COVER Flexible, Weatherproof Joint Opening Covers. RS-6016 2-17 (Replaces 10-14) Features and Components Expand-O-Flash expansion joint covers are flexible, weather-proof
SBS Modified Bitumen Specifications - Johns Manville
www.jm.com3-79 SBS Modified Bitumen Specifications 7.0 Roofing Bitumens 7.1 JM modified bitumen products are designed to be installed with hot asphalt or special cold …
Asphalt-Applied and Cold Application Built-Up Roofing ...
www.jm.comAsphalt-Applied and Cold Application Built-Up Roofing Application Guide. Built-Up Roofing Application Guide TWO SECTION 2-2 RS-4927 2-14 (Replaces 11-13) Asphalt-Applied and Cold Application Built-Up Roofing Application Guide 3.2 These specifications are also for use over JM roof ... Do not mix different grades of asphalt or dilute asphalt with ...
SBS Modified Bitumen Specifications
www.jm.com3-77 SBS Modified Bitumen Specifications 1.0 General Information 1.1 This section provides application information, and outlines specifications currently available from JM Roofing Systems for SBS (Styrene-Butadiene-Styrene) Modified Bitumen Roofing Membranes.
Formaldehyde-free™ Fiberglass Insulation
www.jm.comSAFETY DATA SHEET 200000002059 Formaldehyde-free™ Fiberglass Insulation Version 1.6 Revision Date 09/25/2018 Print Date 10/03/2018 1 / 6 US/EN SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : Basement Wall Insulation® - Unfaced, Steel Frame Thermal and Acoustical Fiberglass Insulation, Spin-Glas® TC EQ, ...
AP Foil-Faced - jm.com
www.jm.comDESCRIPTION Johns Manville AP™ Foil-Faced Polyiso Continuous Insulation board consists of a uniform closed-cell polyisocyanurate foam core bonded on each side to a foil facer. One side has a reflective foil facer and the other side has a white non-reflective foil facer to suit your building needs.
EXPAND-O-FLASHEXPANSION JOINT COVER
www.jm.comEXPAND-O-FLASH ® EXPANSION JOINT COVER Flexible, Weatherproof Joint Opening Covers. RS-6016 8-18 (Replaces 2-17) Features and Components Expand-O-Flash expansion joint covers are flexible, weather-proof
FESCANT PLUS CANT STRIP TAPERED FESCOEDGE STRIP
www.jm.comFESCANT PLUS CANT STRIP TAPERED FESCO ® EDGE STRIP Perlite-Based Specialty Accessory Product Typical Physical Properties* Test ASTM FesCant Plus Cant Strip* Tapered FESCO Edge Strip*
Related documents
Electric Heat Tracing - Thermon
content.thermon.comheater to the pipe with attachment tape on each side of the elbow. • Pipe Supports: For uninsulated pipe supports, allow twice the length of the support, plus an additional 40 cm of trace heater. Install the trace heater in a loop, following Illustration E as a guide. Insulated pipe supports do not require additional length of trace heater.
Underground Electric Transmission Lines
psc.wi.govHigh-Pressure, Fluid-Filled Pipe-Type Cable A high-pressure, fluid-filled (HPFF) pipe-type of underground transmission line, consists of a steel pipe that contains three high-voltage conductors. Figure 1 illustrates a typical HPFF pipe-type cable. Each conductor is made of copper or aluminum; insulated with high-quality, oil-impregnated kraft
INSTALLATION AND OPERATING INSTRUCTIONS FOR EASY …
s3.supplyhouse.comsand. Any sections of pipe exposed to the elements should be insulated and protected from wind, as the “wind chill factor” can be a serious impediment to the performance of the heating cable. For example, a large drainpipe can be used to protect the water pipe from wind chill effects and from such damage as
Master Flow Ductwork Product Catalog RESMF164
www.gaf.comsurface to insulated flexible duct or round pipe. • Tacky gasket provides excellent seal. Model # Diameter Carton Qty. Weight UPC Item Code (050206) TTO6 6" 10 11.6 lb 931141 RSC7X6 6" 6 7 lb 931660 Top Take-Offs • For transition from air plenums or rectangular duct to round pipe or insulated flexible duct. • RSC is a “Scotty” take-off.
WESTERN STATES MIDDLE ATLANTIC STATES ... - Pipe Hangers
www.pipehangers.comPIPE SUPPORT HARDWARE Catalog No. 7 CARPENTER & PATERSON PIPE SUPPORT HARDWARE CATALOG NO. 7. Construction Fasteners Catalog CF V3 Multi-Strut Catalog MS-09 ... PRE-INSULATED SUPPORTS Figure 265CVB-CS Cold Cover Insulation Protection Shield Page 150 Figure 465CVB-MS Long Span Calcium Silicate Insulation Shield Page 151
Thermal Processing o Food - Tiselab
www.tiselab.comPipe blanchers consist of insulated tubes : through which hot water is circulated. Food is metered into the stream, residence time being controlled by the length of the pipe and velocity of the water. The blancher-cooker has three sections, a ... a pre-set temperature, and then cooled
WETT Pre-Inspection - Baerg’s
baergs.caFlue pipe The flue pipe is the pipe (usually black) that connects the appliance to the chimney. Measure the distance between the pipe and any combustible construction. Required clearance around the standard single wall flue pipe is 18”. Double wall flue pipes have a sticker stating the required clearance (usually 6”).
Pipe Supports, Guides, Shields & Saddles
www.eaton.comPre-Insulated Support Applications Pipe Hanger Standard Temperature Type Strut Mounted Prefix Insulation Thickness Pipe Type Pipe Size B338 0=1/2” (13mm) CT = Copper Tubing Sizes Nominal Pipe Commercial Duty, 2=1” (25mm) Blank = Std. Sch. 40 Steel or All Purpose Support * 3=11/2” (38mm) Copper Tubing Size 4=2” (51mm) 6=3” (76mm)
Pipe Insulation (Hot & Cold) Material Selection & Application
local.ecollege.iePipe Insulation (Hot & Cold) Material Selection & Application Revision 2.0, August 2014 Mineral Fibre Glass: Available as flexible blanket, rigid board, pipe covering and other pre-molded shapes. Service temperature range is up to 535°C. Rock and Slag: Rock and slag fibres are bonded together with a heat resistant
Gyrolok Fitting Locator 2 GYROLOK ® Tube Fittings
catalog.hoke.comPST Pre-setting Tool Page51 To cap a tube or plug a fitting, use: HPST Hydraulic Pre-set Tool Page 52 Tools & Accessories LD Leak Detective Page 51 Calibration Fittings fractional tube Page 46 AMS Adapter, SAE fractional tube to • SAE/MS straight thread Page 40 SCF Safety Changer Ferrule Sets frational or metric Page 44