Transcription of Safety Data Sheet - General Sanitation Home
1 DIVOFLOW PROFILE VS8 Revision: 2015-05-25 Version: data SheetSECTION 1: Identification of the substance/mixture and supplier Product identifierProduct name: DIVOFLOW PROFILE Recommended use and restrictions on useIdentified uses: Chlorinated alkaline detergent and sanitiser for CIP and spray washingRestrictions of use: Uses other than those identified are not Details of the supplierDiversey Australia Pty. Limited29 Chifley St, Smithfield, NSW, 2164, AustraliaTelephone: (02) 9757 0300 Fax: (02) 9725 5767 Email: Emergency telephone numberCall 1800 033 111 (24hrs)SECTION 2: Hazards identification Classification of the substance or mixtureClassified as hazardous according to Safe Work Australia corrosion, Category 1 ACorrosive to metals, Category Label elementsSignal word: DangerPage 1 / 10 Hazard statements: AUH031 - Contact with acids liberates toxic - Causes severe skin burns and eye - May be corrosive to statement(s): P234 - Keep only in original - Do not breathe - Wash face, hands and any exposed skin thoroughly after - Wear protective gloves, protective clothing and eye or face statement(s): P301 + P330 + P331 - IF SWALLOWED: Rinse mouth.
2 Do NOT induce + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or + P340 - IF INHALED: Remove person to fresh air and keep comfortable for + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to - Immediately call a POISON CENTRE, doctor or - Specific treatment (see supplemental first aid instructions on this label).P363 - Wash contaminated clothing before - Absorb spillage to prevent material data SHEETDIVOFLOW PROFILE VS8 Storage statement(s): P405 - Store locked - Store in corrosive-resistant container with a resistant inner statement(s): P501 - Dispose of unused content as chemical Other hazardsNo other hazards 3: Composition/information on ingredients Substances / MixturesIngredient(s)CAS numberEC numberClassificationWeight percentsodium hydroxide1310-73-2215-185-5 Skin Corr.
3 1A (H314)Met. Corr. 1 (H290)10-30sodium hypochlorite7681-52-9231-668-3 AUH031 Skin Corr. 1B (H314)STOT SE 3 (H335)Aquatic Acute 1 (H400)Aquatic Chronic 1(H410)Met. Corr. 1 (H290)3-10 Non-hazardous ingredients are the remainder and add up to 100%.Workplace exposure limit(s), if available, are listed in subsection the full text of the H and AUH phrases mentioned in this Section, see Section 4: First aid measures Description of first aid measuresInhalationRemove person to fresh air and keep comfortable for breathing. Get medical attention or advice ifyou feel contact:Take off immediately all contaminated clothing and wash it before re-use. Immediately call aPOISON CENTRE, doctor or contact:Immediately rinse eyes cautiously with lukewarm water for several minutes. Remove contact lenses,if present and easy to do.
4 Continue rinsing. Immediately call a POISON CENTRE, doctor :Rinse mouth. Immediately drink 1 glass of water. Do NOT induce vomiting. Keep at call a POISON CENTRE, doctor or of first aider:Consider personal protective equipment as indicated in subsection aid facilities: Shower and eyewash facilities should be considered in a workplace where Most important symptoms and effects, both acute and delayedInhalation:May cause bronchospasm in chlorine sensitive contact:Causes severe contact:Causes severe or permanent :Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation ofoesophagus and Indication of any immediate medical attention and special treatment neededNo information available on clinical testing and medical monitoring. Specific toxicological information on substances, if available, can be foundin section Information Center: Call 13 11 26 (Australia Wide).
5 SECTION 5: Firefighting measures Extinguishing mediaCarbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant Special hazards arising from the substance or mixtureNo special hazards Advice for firefightersAs in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face Hazchem code2R2 - Fine water - Liquid-tight chemical protective clothing and breathing apparatus. Dilute. W - Liquid-tight chemical protective clothing and breathingapparatus. 2 / 10 Safety data SHEETDIVOFLOW PROFILE VS8 SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency proceduresEnsure adequate ventilation. Do not breathe dust or vapour. In case of an incident in a confined area wear suitable respiratory protection.
6 Wearsuitable protective clothing, gloves and eye/face Environmental precautionsDo not allow to enter drainage system, surface or ground water. Dilute with plenty of Methods and material for containment and cleaning upUse neutralising agent. Absorb onto dry sand or similar inert material. Ensure adequate Reference to other sectionsFor personal protective equipment see subsection For disposal considerations see section 7: Handling and storage Precautions for safe handlingMeasures to prevent fire and explosions:No special precautions required to protect the environment:For environmental exposure controls see subsection on General occupational hygiene:Handle in accordance with good industrial hygiene and Safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix withother products unless adviced by Sealed Air.
7 Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skinthoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Use personal protectiveequipment as required. Avoid contact with skin and eyes. Do not breathe vapours. Use only with adequate Conditions for safe storage, including any incompatibilitiesStore in accordance with local and national regulations. Keep only in original container. Store in a closed conditions to avoid see subsection For incompatible materials see subsection Specific end use(s)No specific advice for end use 8: Exposure controls/personal protection Control parametersWorkplace exposure limitsAir limit values, if available:Ingredient(s)Long term value(s)(TWA) Short term value(s)(STEL) Peak value(s) sodium hydroxide2 mg/m3 Biological limit values, if Exposure controlsThe following information applies for the uses indicated in subsection available, please refer to the product information Sheet for application and handling use conditions are assumed for this Safety measures for handling the undiluted product:Appropriate engineering controls: Where possible: use in automated/closed system and cover open containers.
8 Transport over with automatic systems. Use tools for manual handling of organisational controls: Avoid direct contact and/or splashes where possible. Train protective equipment Eye / face protection: Safety glasses or goggles (EN 166). The use of a full-face shield or other full-face protection isstrongly recommended when handling open containers or if splashes may protection: Chemical-resistant protective gloves (EN 374).Verify instructions regarding permeability and breakthrough time, as provided by the specific local use conditions, such as risk of splashes, cuts, contact time and gloves for prolonged contact:Material: butyl rubberPenetration time: >= 480 minMaterial thickness: >= mmPage 3 / 10 Safety data SHEETDIVOFLOW PROFILE VS8 Suggested gloves for protection against splashes:Material: nitrile rubberPenetration time: >= 30 minMaterial thickness: >= mmIn consultation with the supplier of protective gloves a different type providing similar protection maybe protection: Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes protection: Respiratory protection is not normally required.
9 However, inhalation of vapour, spray, gas oraerosols should be exposure controls: Should not reach sewage water or drainage ditch undiluted or 9: Physical and chemical properties Information on basic physical and chemical propertiesPhysical State: LiquidColour: Clear, Pale, from Yellow to GreenOdour: Product specificOdour threshold: Not applicableSolubility in / Miscibility with Water: Fully miscibleDecomposition temperature: Not Other informationSECTION 10: Stability and reactivity ReactivityNo reactivity hazards known under normal storage and use Chemical stabilityStable under normal storage and use Possibility of hazardous reactionsNo hazardous reactions known under normal storage and use Conditions to avoidNone known under normal storage and use Incompatible materialsContact with acids liberates toxic gas.
10 Reacts with acids. Keep away from Hazardous decomposition productsNone known under normal storage and use 11: Toxicological information Information on toxicological effectsMixture data :Relevant calculated ATE(s):ATE - Oral (mg/kg): >5000 Method / remarkpH: 14 (neat)Melting point/freezing point ( C): Not determinedInitial boiling point and boiling range ( C): Not determinedFlash point ( C): Not combustion: Not determinedEvaporation rate: Not determinedFlammability (solid, gas): Not determinedUpper/lower flammability limit (%): Not determinedVapour pressure: Not determinedVapour density: Not determinedRelative density: g/cm (20 C)Autoignition temperature: Not determinedViscosity: Not determinedExplosive properties: Not properties: Not oxidisingSurface tension (N/m).