Practical Guidelines for the Fabrication of Austenitic ...

← Back to document page

Guidelines for the Fabrication of Austenitic Stainless SteelsTable of Contents1Introduction42History of Austenitic stainless of stainless Austenitic stainless Ferritic stainless Duplex stainless Martensitic stainless Precipitation hardening stainless secondary Temperature of secondary phase Kinetics of secondary phase formation114Role of alloying (Cr) (Ni) (Mo) (C) (N) (Mn) (Cu) (Si) (Nb/Cb) and titanium (Ti) (S) and phosphorus (P)165Mechanical and physical and properties206Corrosion Pitting and crevice Effect of secondary phases on localized Stress corrosion corrosion/sensitization corrosion Weld sensitization/weld Knife-line between Fabrication and corrosion resistance317Care in the shop keeping the surface smooth and delivery and protective iron contamination342The Inter

14.5 Colored stainless steel 78 14.6 Electropolishing 80 14.7 Restoring and protecting the Znish after fabrication 80 15 Post-fabrication cleanup 81 15.1 Common forms of damage and surface contamination 81 15.1.1 Iron contamination 81 15.1.2 Organic compound contamination 81 15.1.3 Oxide scale formed during annealing and welding 82 15.1.4 Other ...

  Steel, Fabrication