Transcription of ˘ 596 E - Spinner II® Products
{{id}} {{{paragraph}}}
Example: quiz answers
˘ 596 E - Spinner II® Products
Model 596 HEInstallation InstructionsParts ListService InstructionsBulletin73981 Three connections are required at the centrifuge:1. Oil Inlet (1/2-in. NPT Female Pipe) Unscrew plastic shipping #8 hose from point of highest Oil Outlet (1/2-in. NPT Female Pipe) Unscrew plasticshipping plug. Run #8 hose to crankcase above oil Air Inlet (1 Female Pipe) Unscrew plastic shipping plug. Run #4 hose from any convenient pointon air supply to air valve cartridge inlet. Do not removecartridge loss of cartridge seal may damage Route hoses to clear exhaust and all movingparts and fasten securely. Be certain the pressurized oil supply is to OIL IN port on side of centrifuge and return tocrankcase is from OIL OUT port on bottom. Do not removefull-flow filters. Use the SpinnerII centrifuge only as abypass oil cleaner. Remove any previously installedbypass filters prior to installation of the Spinner II, andblock ports where InstructionsDirty Oil Supply to Centrifuge Oil InletPressure Tap on Engine Most engines, including the latest models from Cummins, Caterpillar, DDC and Mack,provide a 3/8-in.
Three connections are required at the centrifuge: 1. Oil Inlet (1/2-in. NPT Female Pipe) — Unscrew plastic shipping plug.Run #8 hose from point of highest pressure. 2. Oil Outlet (1/2-in. NPT Female Pipe) — Unscrew plastic shipping plug.
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: