ENVIRONMENTAL PRODUCT DECLARATION - …

ENVIRONMENTAL PRODUCT DECLARATION ... European Waste Catalogue (EWC), the waste key for steel as a component of metal ceiling systems made of steel is:

  Product, European, Waste, Declaration, Catalogue, Environmental, Environmental product declaration, European waste catalogue

Installation and Maintenance Guide - Ceilings from …

2 water is present, or where moisture will come in direct contact with the ceiling. 1.4. Plenum Installation of Optima® and Lyra® Concealed panels requires a minimum of 3" of space in the plenum to install the hanger

  Guide, Installation, Maintenance, Installation and maintenance guide

AXIOM Knife Edge Perimeter Trim - Ceilings from Armstrong

Axiom Knife Edge is a perimeter trim system designed for use with any of the Armstrong suspension systems. Field fabrication is limited to component assembly, straight cuts, and minor adjustments to accommodate differences between design dimensions and actual field conditions.

  Edges, Trim, Knife, Perimeter, Axiom, Axiom knife edge perimeter trim, Axiom knife edge, Perimeter trim

50% U I ALU armstrongceilings.com/greengenie rECLEDyC ...

axiom Knife Edge alignment Clip (aXKEaLiGn) ViSuAl Selection DetAilS For more information, see submittal BPCs-3080. 5-9/16" 2-5/16" axiom Knife Edge for Vector profile Item (AXKE or AXKEV) Corner

  Edges, Knife, Knife edge

KEY SELECTION ATTRIBUTES TYPICAL APPLICATIONS COLOR …

DUNE ™ Square Lay-in & Tegular fine texture 179 Dune™ Square Lay-in panels with Prelude ® XL 15/16" suspension system (Pgs. 279-280) Dune Tegular panels with Interlude XL HRC 9/16" suspension system (Pg. 274) TYPICAL APPLICATIONS

  Unde

KEY SELECTION ATTRIBUTES TYPICAL APPLICATIONS COLOR …

Dune™ Square Lay-in panels with Prelude® XL® 15/16" suspension system (Pgs. 391-392) Dune Tegular panels with Interlude ® XL HRC 9/16" suspension system

  Unde

EXPOSED STRUCTURE - Ceilings from Armstrong

Whether making a design statement that puts acoustical materials front and center, or opting for a more open, exposed structure look with a direct-attach solution, we've got hundreds

  Structure, Exposed, Exposed structure

PART 1 - GENERAL - Ceilings from Armstrong

09120-1 SECTION 09 51 13 AXIOM® INDIRECT LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and

  General, Part, Part 1 general, Part 1 general 1

Section 1 - IDENTIFICATION* * * - Ceilings from Armstrong

Page 1 of 7 Issue Date: 06/1/15 Revision 1.0000 Print Date: 5/29/2015 * * *Section 1 - IDENTIFICATION* * * Material Name: Armstrong Wood Ceilings and Walls (WoodWorks) Chemical Family. Wood particle board ceilings and walls . Recommended Use. ceilings and wall coverings .

  Identification, Section, Section 1

Solid Wood Backer, Dowel, and Backer & Dowel Combination

242 WOODWORKS ® TechLine 877 276 7876 armstrongceilings.com/woodworks WOODWORKS ® Grille Solid Wood Backer, Dowel, and Backer & Dowel Combination STANDARD SIZES

Permeation & Degradation Data - Fisher Sci

permeation resistance is quickly impaired. For this reason, glove/chemical combinations rated “Poor” are usually not tested for permeation resistance, and combinations rated “Not Recommended” are never tested for permeation resistance. Please note, however, that permeation and degradation do not always correlate. The overall Degradation ...

  Resistance, Trade

Valve Chemical Resistance - Global Supply Line

material of choice for most fi re-rated products, primarily because of its high temperature rating of approximately 2000°F. Graphite has excellent chemical resistance, can retain com-pressibility at all temperatures and has a low coeffi cient of fric-tion. Graphite is not recommended for use in strong oxidizing atmospheres.

  Resistance, Trade

Power MOSFET Basics Understanding Superjunction …

600 V rated MOSFETs, more than 95 % of the resistance comes from the epitaxial layer. It is obvious that for any significant reduction in the RDS(on) value, it is necessary to find a way of heavily doping the drift region and drastically reducing the epi resistance. N - Epi N + N + Substrate P + Body Oxide Oxide Gate Source and Body Source and ...

  Basics, Resistance, Understanding, Power, Trade, Mosfets, Power mosfet basics understanding superjunction, Superjunction

Lesson 15: Induction Motor Testing: Lock-Rotor and No-load ...

, the stator conductor resistance Procedure: 1.) Apply dc voltage to stator 2.) Adjust dc source until rated current flows Formulas For wye connected stator dc For delta connected statorV dc dc I R 2 R R dc 1 R 1 1.5 R dc Lesson 15_et332b.pptx 4 Finding Induction Motor Parameters Locked rotor test - finds the rotor parameters (R 2, x 2) and ...

  Resistance, Trade

Fire Separations & Fire resistance Ratings - CWC

resistance ratings have little impact, but they become increasingly important as the fire grows and approaches full-room involvement (i.e., flashover). With respect to life safety, the combined effect of fire separations and fire-resistance ratings is essential in large or tall buildings where a fire could grow large before all

  Resistance, Fire, Ratings, Separation, Fire separations amp fire resistance ratings

Ballistic Resistance of Body Armor NIJ Standard-0101

Ballistic Resistance of Body Armor,” is a minimum performance standard developed in collaboration with the Office of Law Enforcement Standards (OLES) of the National Institute of Standards and Technology (NIST). It is produced as part of the Standards and Testing Program of the National Institute of Justice (NIJ), Office of

  Resistance

USG Area Separation Wall Systems Brochure (English) - …

Fire resistance testing ensures that this critical performance component will not be compromised when the system is properly installed. Fire testing results in the following: – UL Classification of all gypsum panel components for fire resistance – UL listing of …

  System, Resistance, Walls, English, Brochure, Wall systems brochure