Technical Instructions - Watts Water

109/14/2007 The Hydroguard XP LFMM430 series is a temperature actuated mixing valve designed for use in hot Water distribution systems, in compliance with ASSE Operating Pressure .. 125 psi (861 kPa)Maximum Hot Water Temperature ..200 F (93 C)Minimum Hot Water Supply Temp .. 5 F (3 C) Above Set-Point*Temp. Adjustment Ranges ** Standard:.. 90 - 160 F (32 - 71 C) Low: .. 60 - 90 F (16 - 32 C)Hot Water Inlet Temperature Range ..120 -180 F (49 - 82 C)Cold Water Inlet Temperature Range .. 40 - 80 F (4 - 27 C) ASSE 1017 Certified .. CSA B125* With Equal Pressure** Low limit cannot be less than the cold Water temperature. For best operation, hot Water should be at least 5 F (3 C) above desired set nHYDROGUARD XP Master Tempering Valves Series LFMM430 Technical InstructionsIS-P-MM430 Advanced Thermal ActivationWARNING!Read this Manual BEFORE using this to read and follow all safety and use infor-mation can result in death, serious personal injury, property damage, or damage to the this Manual for future are required to consult the local building and plumbing codes prior to installation .

1. Installation should be in accordance with acceptable plumb-ing practices. Flush all piping thoroughly before installation. Installation and field adjustment are the responsibility of the

Loading..

Tags:

  Installation, Instructions

Information

Related search queries