Canterbury residential technical guidance - Part C ...

Building work that does not require a building consent

GUIDANCE Building Act 2004 THIRD EDITION 2014 - AMENDED AUGUST 2017 Building work that does not require a building consent

  Guidance

C/AS2 - Acceptable Solution for Acceptable Solution for ...

C/AS2 Acceptable Solution for Buildings with Sleeping (non institutional) (Risk Group SM) For New Zealand Building Code Clauses C1-C6 Protection from Fire

Earthquake geotechnical engineering practice

Earthquake geotechnical engineering is a highly specialised field. As such the investigations for this need to be developed and carried out by an appropriately qualified and experienced geotechnical engineer or engineering geologist (referred to herein as the geotechnical professional). For the purposes of this document ‘geotechnical

  Geotechnical

E2 External Moisture

For single- and two-storey concrete and concrete masonry construction within specific limitations: E2/AS3. For light steel framed buildings up to 3 storeys, within specific limitations: E2/AS4. E2.3.3 Ground contact or proximity All walls, floors and structural elements in ground contact or proximity, except for buildings where external

  Light, Concrete

Module 6: Earthquake resistant retaining wall design

guidance on earthquake design aspects for retaining . structures that are not well covered in these handbooks or elsewhere. The main objective is to identify situations where seismic design of retaining structures should be considered, to provide the necessary seismic parameters, and to identify key issues relating to seismic design.

  Design, Seismic, Structure, Walls, Module, Resistant, Seismic design, Retaining, Earthquake, Module 6, Retaining structures, Earthquake resistant retaining wall design

Worked Example 4 | Design of a tied-back retaining wall to ...

Design of a tied-back retaining wall to resist earthquake loading . Worked example to accompany MBIE Guidance on the seismic design of retaining structures for residential sites in Greater Christchurch (Version 2) November 2014 . Tied-back retaining walls were used originally as a substitute for braced retaining walls in deep excavations.

  Design, Seismic, Structure, Walls, Loading, Seismic design, Retaining, Earthquake, Sisters, Retaining structures, Retaining wall to resist earthquake loading

Acceptable Solutions and Verification Methods

4.2 Sizing of downpipes 42 4.3 Installation of downpipes 42 5.0 Roof Gutters 42 5.1 Size of roof gutter 42 5.2 Materials44 5.3 Gradients44 5.4 Thermal movement 44 5.5 Overflow outlets 44 Appendix A Rainfall intensities 45 Index 47 Contents Amend 4 Dec 2000 Amend 4 …

  Verification, Solutions, Methods, Acceptable, Roof, Appendix, Sizing, Acceptable solutions and verification methods

Acceptable Solutions and Verification Methods

4.2 Sizing of downpipes 42 4.3 Installation of downpipes 42 5.0 Roof Gutters 42 5.1 Size of roof gutter 42 5.2 Materials44 5.3 Gradients44 5.4 Thermal movement 44 5.5 Overflow outlets 44 E1/AS1 Appendix A Rainfall intensities 45 Acceptable Solution E1/AS2 52 1.0 AS/NZS 3500.3 Stormwater Dec 2000 drainage52 Index 56 Contents Amend 4

  Verification, Solutions, Methods, Acceptable, Roof, Appendix, Sizing, Acceptable solutions and verification methods

Commentary for Acceptable Solutions C/AS1 to C/AS7 ...

December 2013. Contents Acceptable Solutions C/AS1 to C/AS7 Part 1: General 2 ... 4.11 Protected shafts 31 4.13 Floors 32 4.14 Subfloor spaces 32 ... INNOVATION AND EMPLOYMENT – 15 FEBRUARY 2013 I 1 Part 5: Control of external fire spread 34 5.1 General principles 34 5.2 Horizontal fire spread from external walls 36 5.5 Table method for ...

  2013, December, December 2013

Constructing Cavities - Building Performance

Table 23 (’Properties of roof underlays and building wraps‘). Install the wall underlay directly over the framing. Install the cavity battens directly over the wall underlay as described in Cavity battens on page 9. No additional wall underlay is needed between the wall cladding and the cavity battens except in the following situations.

  Building, Constructing, Wrap, Cavities, Building wraps, Constructing cavities

Blood Donor Selection - World Health Organization

on assessing donor suitability for blood donation have been developed to assist blood transfusion services in countries that are establishing or strengthening national systems for the selection of blood donors1. They are designed for use by policy makers in national blood programmes in ministries of health, national

  Health, Blood, Assessing, World health organization, World, Organization, Selection, Suitability, Donors, Blood donor selection

Climate Change 2007 – The Physical Science Basis Climate ...

Climate Change 2007 Synthesis Report Edited by The Core Writing Team Rajendra K. Pachauri Andy Reisinger Synthesis Report Chairman Head, Technical Support Unit

  Change, Climate, 2007, Climate change 2007

Unit 7: Provide Eyelash and Brow Treatments - Edexcel

M2 assess the suitability of selected products, tools, equipment, techniques and aftercare advice for three different clients. D2 compare the suitability of selected products, tools, equipment, techniques and aftercare advice for three different clients. P27 describe how treatments can be adapted to suit client treatment needs and facial

  Suitability

MEDICAL, DENTAL AND EDUCATIONAL SUITABILITY …

medical treatment facility (MTF) Suitability Screening Coordinator will place the completed original form in the service or family member's MTF medical record and retain a copy for audit. Disclosure: Voluntary; however, failure to provide this information may delay the screening process, result in orders held in abeyance until completion

  Suitability

A GUIDE TO ELIGIBILITY FOR STANDARD CERTIFICATES FOR ...

suitability of the person to whom the question relates or of any other person to be approved as able to undertake, in the course of acting as a ... Any question asked by or on behalf of the Master Locksmiths Association for the purposes of assessing the suitability of any person who has

  Assessing, Suitability

Finalised guidance Assessing suitability

Assessing suitability: Establishing the risk a customer is willing and able to take and making a suitable investment selection Financial Services Authority Page 4 of 31 Relying on risk-profiling and asset-allocation tools 1.10 Tools can usefully aid discussions with customers, by helping to provide structure and promote ...

  Assessing, Suitability, Assessing suitability

NSW Fire and the Environment 2019-20: Summary

Assessing the effects of the 2019–20 fires New South Wales has experienced extensive bushfires throughout spring and summer 2019–20. The Environment, Energy and Science Group has assessed the effects of the bushfires on a range of biodiversity and landscape values. This Summary provides an outline of the biodiversity and

  Assessing, Fire, 2019, Environment, Summary, Nsw fire and the environment 2019 20

RETURNING INJURED WORKERS TO SUITABLE …

that suitability of the job and entitlement to payment of relocation expenses can be determined. The claims examiner must notify the injured worker with suitable job offer who meets the criteria for payment of relocation expenses of the provisions of Section 10.508 of the regulations. The supervisory claims examiner will review the claims

  Suitable, Worker, Injured, Suitability, Injured workers to suitable

Assessing HVDC Transmission for Impacts of Non ...

assess the suitability of HVDC technology in addressing grid integration issues related to the development of renewable energy. Second, ICF compiled and summarized the recent trends in HVDC project costs

  Assessing, Transmissions, Impact, Suitability, Hvdc, Assessing hvdc transmission for impacts of