Analog Output Module AQ 4xU/I ST (6ES7135-6HD00-0BA1)

1 Analog Output Module AQ 4xU/I ST _____. Preface (6ES7135-6HD00-0BA1) _____. Documentation guide 1. _____. Product overview 2. SIMATIC. _____. Wiring up 3. ET 200SP. Analog Output Module AQ 4xU/I ST _____ 4. Parameters/address space (6ES7135-6HD00-0BA1). _____. Interrupts/diagnostics alarms 5. Manual _____. Technical specifications 6. _____. Parameter data record A. _____. Representation of Analog values B. 03/2016. A5E03573365-AD. Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property.

2 The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER. indicates that death or severe personal injury will result if proper precautions are not taken. WARNING. indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION. indicates that minor personal injury can result if proper precautions are not taken.

3 NOTICE. indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

4 Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: WARNING. Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

5 The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. Trademarks All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency.

6 However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG A5E03573365-AD Copyright Siemens AG 2012 - 2016. Division Digital Factory 04/2016 Subject to change All rights reserved Postfach 48 48. 90026 N RNBERG. GERMANY. Preface Purpose of the documentation This manual supplements the system manual ET 200SP distributed I/O system ( ). Functions that generally relate to the system are described in this manual. The information provided in this manual and in the system/function manuals supports you in commissioning the system.

7 Changes compared to previous version Changes described in this manual, compared to the edition 07/2014: 3-wire connection for voltage Output Derating trend for current Output for modules as of hardware version FS 06. Conventions CPU: When the term "CPU" is used in this manual, it applies to the CPUs of the S7-1500. automation system as well as to the CPUs/interface modules of the distributed I/O system ET 200SP. STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the configuration and programming software "STEP 7 (TIA Portal)".

8 Please also observe notes marked as follows: Note A note contains important information on the product described in the documentation, on the handling of the product or on the section of the documentation to which particular attention should be paid. Analog Output Module AQ 4xU/I ST (6ES7135-6HD00-0BA1). 4 Manual, 03/2016, A5E03573365-AD. Preface Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks.

9 They are important components in a holistic industrial security concept. With this in mind, Siemens'. products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action ( cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered.

10 You can find more information about industrial security on the Internet ( ). To stay informed about product updates as they occur, sign up for a product-specific newsletter. You can find more information on the Internet ( ). Analog Output Module AQ 4xU/I ST (6ES7135-6HD00-0BA1). Manual, 03/2016, A5E03573365-AD 5. Table of contents Preface .. 4. 1 Documentation guide .. 7. 2 Product overview .. 11. Properties .. 11. 3 Wiring up .. 14. Terminal assignment .. 14. Schematic circuit diagram .. 15. 4 Parameters/address space.