Bussmann series 15.5 kV E-Rated medium voltage fuses for ...

1 Technical Data 10353 Effective November 2019 Supersedes October 2019 BUSSMANNSERIESD escription: Bussmann series of E-Rated , current-limiting, medium voltage fuses are for feeder circuit, switchgear and transformer and benefits Current-limiting E-Rated medium voltage fuses are defined by their melting time-current characteristic that permit their electrical interchangeability with other fuses of the same E Rating. E-Rated fuses must have a defined current response time specified by ANSI E-Rated fuses of 100 amps and below must melt in 300 seconds at an RMS current within the range of 200% to 240% of the fuse s nameplate current rating. E-Rated fuses greater than 100 amps must melt within 600 seconds at an RMS current in the range of 220% to 264% of the fuse s nameplate current rating. E-Rated fuses are physically dimensioned for easy installation in existing hardware. Current-limiting fuses provide positive interruption even on low fault currents.

2 The fuse limits the magnitude of electromechanical stresses in the protected apparatus. Constructions available in ferrule, bolt-on and clip-lock, and specialty mount fuses for AMPGARD motor starters. Outdoor rating available on select catalog numbers (requires installation in a suitable enclosure). Open fuse indicator speeds troubleshooting by providing a positive visual indication of fuse operation. 50/60 Hz operating frequency for worldwide application. Mountings are available in disconnect and non-disconnect versions with porcelain or glass poly-ester insulators. Live parts and end fittings applications: medium voltage transformer primary protection medium voltage feeder circuit protection medium voltage switches medium voltage metal-enclosed kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer protection2 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer medium voltage ferrule fusesCatalog symbols: General purpose 15 CLE-_E-D (long construction, 10-25 A) 15 CLE-_E (long construction, 15-300 A) 15 HLE-_E (short construction, 10-250 A) 15 LHLE-_E (intermediate construction, 65-300 A) Full range (per ANSI ) MV155F_Ratings*: Volts kV Amps 10 to 300 A Interrupting ratings to 63 kA RMS Sym.

3 * See catalog number tables for voltages, ampacities and interrupting ratings by catalog information: E-Rated fuses meet the performance characteristics of ANSI UL Listed, Guide JEEG, File E240398. See catalog (see catalog number tables for values) ( ) B B C ARecommended fuseclips and holders:Amp ratingFuse mounting typeVoltage BIL (kV)Approximate dimensions - in (mm)Catalog numberMounting (including live parts, end fittings)**Live parts (including end fittings)End fittings (disconnect only)DiameterClip centerLengthPorcelain insulatorGlass-polyester insulatorCLE15E 25 ESingle barrelNon-disconnect 952 (51)20 (508) (546)15 CLE-PNM-C15 CLE-GNM-C CLE-NL-C 110 15 CLE-HPNM-C CLE-NL-C Disconnect 9515 CLE-PDM-C15 CLE-GDM-CCLE-DL-CCLE-DF-C11015 CLE-HPDM-C CLE-DL-CCLE-DF-C10E-D 25E-D 30E 100E Single barrelNon-disconnect 95 3 (76) 20 (508) (607)15 CLE-PNM-D15 CLE-GNM-DCLE-NL-D 110 15 CLE-HPM-D CLE-NL-D Disconnect 9515 CLE-PDM-D15 CLE-GNM-DCLE-DL-DCLE-DF-D11015 CLE-HPDM-D CLE-DL-DCLE-DF-D125E 300E Double barrelNon-disconnect110 3 (76)20 (508) (607)15 CLE-PNM-E CLE-NL-E Disconnect 110 15 CLE-PDM-E CLE-DL-ECLE-DF-EHLE10E-80E Single barrelNon-disconnect953 (76)

4 15 (381) (480)15 HLE-PNM-D15 HLE-GNM-DCLE-NL-D Disconnect 9515 HLE-PDM-D15 HLE-GDM-DCLE-DL-DCLE-DF-D100E 250E Double barrelNon-disconnect953 (76)15 (381) (480)15 HLE-PNM-E CLE-NL-E Disconnect 9515 HLE-PDM-E CLE-DL-ECLE-DF-ELHLE65E 100E Single barrelNon-disconnect 3 (76)18 (457) (521)Not availableNot availableCLE-NL-D Disconnect Not availableNot availableCLE-DL-DCLE-DF-D125E 300E Double barrelNon-disconnect 3 (76) 18 (457) (521)Not availableNot availableCLE-NL-E Disconnect Not availableNot availableCLE-DL-E CLE-DF-E** End fittings supplied only when required. Disconnect mountings provide a means for fuse extraction only. Do not use a disconnect mounting for load switching or fuse removal while Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer , HLE and LHLE Type general purpose fusesAmpsDimensions in (mm)IR RMS Sym.

5 (kA)No. of barrelsInstallation locationCatalog ADiameter BClip centers CCLE Long (607)3 (76)20 (508)631 (546)2 (51) * (607)3 (76)63 (546)2 (51) * (607)3 (76)63 (546)2 (51) * (607)3 (76)63 Indoor/outdoor15 CLE-25E-D3015 CLE-30E4015 CLE-40E 5015 CLE-50E 6515 CLE-65E 8015 CLE-80E 10 015 CLE-100E 125215 CLE-125E-D 15015 CLE-150E-D 17515 CLE-175E 20015 CLE-200E 25015 CLE-250E 30015 CLE-300E HLE Short (480)3 (76)15 (381)631 Indoor/outdoor15 HLE-10E1515 HLE-15E2015 HLE-20E2515 HLE-25E3015 HLE-30E4015 HLE-40E 5015 HLE-50E 6515 HLE-65E 8015 HLE-80E 10 0215 HLE-100E-D 12515 HLE-125E-D 15015 HLE-150E 17515 HLE-175E 20015 HLE-200E 25015 HLE-250E (521)3 (76)18 (457)501 Indoor/outdoor15 LHLE-65E8015 LHLE-80E10 015 LHLE-100E125215 LHLE-125E-D15015 LHLE-150E-D17515 LHLE-175E20015 LHLE-200E25015 LHLE-250E30015 LHLE-300E* fuses conform to dimensional standards established by Westinghouse.

6 UL Listed, Guide JEEG, File Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer CBAGEFDF igure 2 Figure 3 Figure 1MV155F_ Full rangeAmpsDimensions in (mm)IR RMS Sym. (kA)No. of barrelsInstallation locationCatalog ADiameter BClip centers (475)2 (51)15 (381)501 IndoorMV155F1 CBX5E7MV155F1 CBX7E10MV155F1 CBX10E103 (76)MV155F1 DBX10E152 (51)MV155F1 CBX15E153 (76)MV155F1 DBX15E202 (51)MV155F1 CBX20E203 (76)MV155F1 DBX20E252 (51)MV155F1 CBX25E253 (76)MV155F1 DBX25E302 (51)MV155F1 CBX30E303 (76) (551)18 (457) (475)15 (381) (551)18 (457)MV155F1 DCX80E10 (475)15 (381)MV155F1 DBX100E10 (551)18 (457) (475)15 (381) (551)18 (457) (475)15 (381) (551)18 (457) (475)15 (381) (551)18 (457) (475)15 (381) (551)18 (457)MV155F2 DCX200 ERecommended CLE, HLE and MV155 fuseclipsDescriptionFuse diameter - in (mm)FigureClip dimensions - in (mm)ABCDEFGC atalog numberEnclosed fuseclip2 (51) (95) (50) (51) (30) (115) (38) (10)A3354710*Enclosed fuseclip3 (76) (105) (62) (76) (30) (143) (38) (10)

7 A3354730*Open fuseclip2 See dimensions drawing1A0065 Spring loaded open fuseclip39078A67G04*For single barrel applications only. Not sold in Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves minimum melt for MV155 2 inch diameter fusesTIME IN SECONDSAMPERERATING1,0007,00010010 CURRENT IN (2 inch diameter)6 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves total clear for MV155_ 2 inch diameter fusesTIME IN ,0007,00010010 CURRENT IN AMPERESMV155_ (2 inch diameter)7 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves minimum melt for MV155_ 3 inch diameter fusesMV155_ (3 inch diameter). IN SECONDSCURRENT IN AMPERES10A15A20A25A30A40A50A65A80A100A12 5A150A175A200A8 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves total clear for MV155_ 3 inch diameter fusesMV155_ (3 inch diameter)TIME IN SECONDSCURRENT IN Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV peak let-through for MV155_ 2 and 3 inch diameter fusesMV155_ (2 and 3 inch diameter)1 AVAILABLE CURRENT IN KILOAMPERES (RMS Symmetrical)MAXIMUM LET-THROUGH (Peak Kiloamperes) Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves minimum melt for 15 LHLE_ 3 inch diameter fusesTIME IN SECONDSCURRENT IN AMPERES15 LHLE_ (3 inch diameter)

8 Curve TC66703203 April 201111 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves total clear for 15 LHLE_ 3 inch diameter fusesTIME IN SECONDSCURRENT IN AMPERES15 LHLE_ (3 inch diameter)Curve TC66703303 April 201112 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV peak let-through for 15 LHLE_ 3 inch diameter fusesPeak Instantaneous Let-Through Current in Kilo-amperiesCURRENT IN AMPERES15 LHLE_ (3 inch diameter)Curve TC70547404 April 201113 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer and HLE type mountings - in (mm)Catalog numberHole centersOverall lengthHole insetHole centersContact heightOverall heightBIL kVABCDEFGD isconnect single barrel ( )6 ( )34 ( ) ( ) ( )7 ( ) ( ) ( )6 ( )31 ( ) ( ) ( )7 ( ) ( ) ( )6 ( )34 ( ) ( ) ( )7 ( ) ( ) ( )6 ( )31 ( ) ( ) ( )7 ( ) ( ) ( )6 ( )34 ( ) ( ) ( ) ( ) ( ) ( )6 ( )31 ( ) ( ) ( ) ( ) ( ) ( )6 ( )25 ( ) ( ) ( )7 ( ) ( ) ( )6 ( )25 ( ) ( ) ( )7 ( ) ( )95 Disconnect double barrel ( )6 ( )31 ( ) ( ) ( ) ( ) ( ) ( )6 ( )25 (635) ( ) ( )7 ( ) ( ) ( )6 ( )25 (635) ( ) ( )7 ( ) ( )95 Non-disconnect single ( )6 ( ) ( ) ( ) ( )7 ( ) ( ) ( )6 ( ) ( ) ( ) ( )7 ( ) ( ) ( )6 ( ) ( ) ( ) ( ) ( ) ( ) ( )6 ( )31 ( ) ( ) ( )7 ( ) ( ) ( )6 ( )31 ( ) ( ) ( )7 ( ) ( ) ( )6 ( )31 ( ) ( ) ( ) ( ) ( ) ( )6 ( )25 (635) ( ) ( )7 ( ) ( ) ( )6 ( )25 (635) ( ) ( )7 ( ) ( )

9 95 Non-disconnect double ( )6 ( )31 ( ) ( ) ( ) ( ) ( ) ( )6 ( )25 (635) ( ) ( )7 ( ) ( ) ( )6 ( )25 (635) ( ) ( )7 ( ) ( )95 CLE and HLE Type disconnect mounting CLE and HLE Type non-disconnect mountingDDEEACBGFDDEEABCGF Disconnect mountings provide a means for fuse extraction only. Do not use a disconnect mounting for load switching or fuse removal while Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer medium voltage specialty mount fusesCatalog symbols: 15 BHLE-_E (bolt-on version) 15 HCL-_E (clip-lock version)Ratings*: Volts kV Amps 10 to 300 A Interrupting ratings 50 to 63 kA RMS Sym* See catalog number tables for voltages, ampacities and interrupting ratings by catalog information: E-Rated fuses meet the performance characteristics of ANSI live parts for clip-lock fuses Catalog number ( ) C AIndicator to belocated ( ) ( ) C AIndicator to belocated ( ) ( ) C ( )HCLD imensions - in (mm)BHLE ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )Indicator x ( x ) SlotsC ( ) Dia.

10 ( )B* Flush with surface in untripped position, trip force is 2 lb ( ) ( ) ( )15 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer , BHLE and HCL type fusesAmpsDimensions in (mm)IR RMS Sym. (kA)No. of barrelsInstallation locationCatalog ADiameter BHole centers CBHCL and BHLE (563)3 (76) (531)631 Indoor/outdoor15 BHLE-10E1515 BHLE-15E2015 BHLE-20E2515 BHLE-25E3015 BHLE-30E4015 BHLE-40E 5015 BHLE-50E 6515 BHLE-65E 8015 BHLE-80E 10 0215 BHLE-100E-D 12515 BHLE-125E-D 15015 BHLE-150E 17515 BHLE-175E 20015 BHLE-200E 25015 BHLE-250E (637) (602)50 Indoor15 BHCL-300E4003 Indoor15 BHCL-400 EHCL (579)3 (76)N/A631 Indoor15 HCL-10E1515 HCL-15E2015 HCL-20E2515 HCL-25E3015 HCL-30E4015 HCL-40E 5015 HCL-50E 6515 HCL-65E 8015 HCL-80E 10 015 HCL-100E 125215 HCL-125E-D 15015 HCL-150E 17515 HCL-175E 20015 HCL-200E 25015 HCL-250E 30015 HCL-300E UL Listed, Guide JEEG, File Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves minimum melt for 15 CLE-_E and 15 CLE-_-D15 CLE-_Curve 70548501 April 16, 1999 Reference # 563532 Curve 70546801 April 1999 Reference # 705468 Curve 70547001 April 1999 Reference # 70547017 Technical Data 10353 Effective November kV E-Rated medium voltage fuses for feeder circuit, switchgear and transformer kV time-current curves total clear for 15 CLE-_E and 15 CLE-_-D15 CLE-_Curve 70548601 April 16.