Code of practice - Internal wet area membrane systems
This document provides the Waterproofing Membrane Association's recommended practices for waterproofing solutions using internal wet-area waterproof membrane systems. It specifies requirements that will achieve compliance with relevant NZBC clauses and current Acceptable Solution provisions.
Tags:
System, Internal, Area, Membrane, Waterproofing, Internal wet area membrane systems
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
Documents from same domain
Building work that does not require a building consent
www.building.govt.nzGUIDANCE Building Act 2004 THIRD EDITION 2014 - AMENDED AUGUST 2017 Building work that does not require a building consent
C/AS2 - Acceptable Solution for Acceptable Solution for ...
www.building.govt.nzC/AS2 Acceptable Solution for Buildings with Sleeping (non institutional) (Risk Group SM) For New Zealand Building Code Clauses C1-C6 Protection from Fire
Earthquake geotechnical engineering practice
www.building.govt.nzEarthquake geotechnical engineering is a highly specialised field. As such the investigations for this need to be developed and carried out by an appropriately qualified and experienced geotechnical engineer or engineering geologist (referred to herein as the geotechnical professional). For the purposes of this document ‘geotechnical
E2 External Moisture
www.building.govt.nzFor single- and two-storey concrete and concrete masonry construction within specific limitations: E2/AS3. For light steel framed buildings up to 3 storeys, within specific limitations: E2/AS4. E2.3.3 Ground contact or proximity All walls, floors and structural elements in ground contact or proximity, except for buildings where external
Module 6: Earthquake resistant retaining wall design
www.building.govt.nzguidance on earthquake design aspects for retaining . structures that are not well covered in these handbooks or elsewhere. The main objective is to identify situations where seismic design of retaining structures should be considered, to provide the necessary seismic parameters, and to identify key issues relating to seismic design.
Design, Seismic, Structure, Walls, Module, Resistant, Seismic design, Retaining, Earthquake, Module 6, Retaining structures, Earthquake resistant retaining wall design
Worked Example 4 | Design of a tied-back retaining wall to ...
www.building.govt.nzDesign of a tied-back retaining wall to resist earthquake loading . Worked example to accompany MBIE Guidance on the seismic design of retaining structures for residential sites in Greater Christchurch (Version 2) November 2014 . Tied-back retaining walls were used originally as a substitute for braced retaining walls in deep excavations.
Design, Seismic, Structure, Walls, Loading, Seismic design, Retaining, Earthquake, Sisters, Retaining structures, Retaining wall to resist earthquake loading
Acceptable Solutions and Verification Methods
www.building.govt.nz4.2 Sizing of downpipes 42 4.3 Installation of downpipes 42 5.0 Roof Gutters 42 5.1 Size of roof gutter 42 5.2 Materials44 5.3 Gradients44 5.4 Thermal movement 44 5.5 Overflow outlets 44 Appendix A Rainfall intensities 45 Index 47 Contents Amend 4 Dec 2000 Amend 4 …
Verification, Solutions, Methods, Acceptable, Roof, Appendix, Sizing, Acceptable solutions and verification methods
Acceptable Solutions and Verification Methods
www.building.govt.nz4.2 Sizing of downpipes 42 4.3 Installation of downpipes 42 5.0 Roof Gutters 42 5.1 Size of roof gutter 42 5.2 Materials44 5.3 Gradients44 5.4 Thermal movement 44 5.5 Overflow outlets 44 E1/AS1 Appendix A Rainfall intensities 45 Acceptable Solution E1/AS2 52 1.0 AS/NZS 3500.3 Stormwater Dec 2000 drainage52 Index 56 Contents Amend 4
Verification, Solutions, Methods, Acceptable, Roof, Appendix, Sizing, Acceptable solutions and verification methods
Commentary for Acceptable Solutions C/AS1 to C/AS7 ...
www.building.govt.nzDecember 2013. Contents Acceptable Solutions C/AS1 to C/AS7 Part 1: General 2 ... 4.11 Protected shafts 31 4.13 Floors 32 4.14 Subfloor spaces 32 ... INNOVATION AND EMPLOYMENT – 15 FEBRUARY 2013 I 1 Part 5: Control of external fire spread 34 5.1 General principles 34 5.2 Horizontal fire spread from external walls 36 5.5 Table method for ...
Constructing Cavities - Building Performance
www.building.govt.nzTable 23 (’Properties of roof underlays and building wraps‘). Install the wall underlay directly over the framing. Install the cavity battens directly over the wall underlay as described in Cavity battens on page 9. No additional wall underlay is needed between the wall cladding and the cavity battens except in the following situations.
Building, Constructing, Wrap, Cavities, Building wraps, Constructing cavities
Related documents
Guidelines for Waterproofing of Underground Structures
ondemandweb.pbworld.net3.0 Waterproofing Systems There are numerous waterproofing systems available in the market place: • Liquid systems toweled or mopped • Panel systems • Sheet membranes • Epoxy systems • Sprayed systems • Hybrid systems It should be noted that epoxy systems, liquid and some of the hybrid systems can be applied by
DETAILED TECHNICAL SPECS - WATERPROOFING
ipwtwaterproofing.comDETAILED TECHNICAL SPECS - WATERPROOFING CONSTRUCTION SPECIFICATIONS INSTITUTE (CSI) FORMAT 1 PART 1 – GENERAL 1.01 SUMMARY A. Section Includes: Furnishing of all labour, materials, services and equipment necessary for the supply and installation of waterproofing systems (as described in the BOQ) to concrete
WATERPROOFING SikaSwell® HYDROPHILIC PROFILES AND …
www.sikawaterproofing.co.ukother waterproofing systems such as water- stops, e.g. in complex detailing and structures exposed to high water pres-sure. The SikaSwell® systems can also provide effective solutions for waterproofing in difficult exposures or application condi-tions, e.g. against seawater or water with a high salt content,
PREVENTING WATERPROOFING DEFECTS
www.qbcc.qld.gov.authe waterproofing membrane. The suitability of the plants to be installed should be considered, as certain rooting systems are aggressive and may penetrate the membrane. Mulch should be considered when determining the soil fill level. Externally exposed walls of planter boxes should be waterproofed to
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF
bca.gov.sg12.3 ROOF MEMBRANE SYSTEMS The waterproofing membrane is considered to be most important component of the roofing system as it serves the main function of keeping water out of the building. Below are some common roof waterproofing membranes used locally: a. Liquid-applied membranes
Schluter -Shower System Installation Handbook 2020
pdf.lowes.comCONTENTS 4 6 Schluter®-KERDI waterproofing membrane 8 Schluter®-KERDI-BOARD waterproof building panel 10 Schluter®-DITRA-HEAT shower application 12 Curbless showers 16 Schluter®-KERDI waterproofing membrane and Schluter®-KERDI-BOARD waterproof building panel 18 Schluter®-KERDI-DS waterproofing membrane 20 Bathtub surround assembly 22 …
Custom Building Products RedGard Waterproofing and Crack ...
www.cmdgroup.comRedGardª Waterproofing and Crack Prevention Membrane Custom 9240ª Waterproofing and Anti-Fracture Membrane 2. Manufacturer Custom Building Products 13001 Seal Beach Blvd. Seal Beach, CA 90740-2757 monolithic membrane.(800) 272-8786 Custom 9240 is a liquid-applied polymer (562) 598-8808 Fax: with a reinforcing fabric.(800) 200-7765
Pedestrian and Waterproofing System
www.tremcosealants.comPedestrian and Waterproofing System Page www.tremcosealants.com 1 of 2 Product Description Vulkem® 350/351 is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for
ROOFING SYSTEM APPROVAL - Miami-Dade
www.miamidade.govreinforced waterproofing membrane. Designed as a metal Polystick MTS ' 60 mils thick Manufacturing Location #2 658" x 3'3-3/ 8" TAS 103 A homogeneous, rubberized asphalt waterproofing membrane, glass fiber reinforced with polyolefinic film on the upper surface for use as an underlayment for metal roofing, roof tile, slate tiles and shingle ...