Transcription of D130 Auxiliary Relay Module
1 Intrusion Alarm Systems | d130 Auxiliary Relay Module , 12/24 VDCD130 Auxiliary Relay Module , 12/24 VDC u12 VDC or 24 VDC relayuAllows switching of current or voltageuTwo non-latching Form C dry contact outputsuRed LED shows coil is energizeduMounts in control panel enclosureThe d130 Auxiliary Relay Module can be used with allBosch Security Systems control panels. The relaymodule consists of a 12 VDC or 24 VDC Relay . Thisdevice allows the system to handle larger amounts ofcurrent or different voltages that are beyond thecontrol panel's Auxiliary power rating, or the rating ofmodules such as the D8129 UL Listed, 12 VDC or 24 VDC Auxiliary powersupply is required to supply power to the d130 ' Relay is polarized and has two sets of non-latchingForm C contacts. When the contacts are in the inactivestate, the normally-closed terminal has continuity withthe common terminal.
2 When the contacts are in theactive state, the normally-open terminal has continuitywith the common terminal. The Relay is activated byswitching polarity. A red LED lights to indicate the coilis overviewInitiating Circuit ApplicationThe d130 is commonly used with a D125B Dual ClassB Initiating Module and a UL Listed 24 VDC powersupply. In this configuration power to the detectorscan be interrupted by a command from the fire alarmcontrol panel (FACP).Certifications and approvalsRegionRegulatory compliance/quality marksUSAULAPOU: Proprietary Alarm Units(UL1076), UOJZ: Control Units, System(UL864, 9th edition)ULUL 985 - Household Fire Warning Sys-tem Units (6th edition)ULUL 864 - Standard for Control Units andAccessories for Fire Alarm Systems(10th edition)FMCSFMC alifornia State Fire MarshalFDNY-CoA6286 D7412GV4 D9412GV4 NYC COA6286 2018-2021 RegionRegulatory compliance/quality marksFDNY-CoA6059 [D9412GV3 & D7412GV3]NYC-MEA12-92-E, Vol.
3 12 12-92-E, Vol. 12 NYC-MEA12-92-E, Vol. 15 12-92-E, Vol. 15 NYC-MEA12-92-E, Vol. II 12-92-E, Vol. IIInstallation/configuration notesCompatible ProductsThe following products are compatible with the d130 Auxiliary Relay Module :CategoryProductIDProduct DescriptionControl PanelsAll Bosch Security System control panels and FACPsModulesD125 BDual Class B initiating moduleD8129 OctoRelay modulePower SuppliesD9142F24 VDC Auxiliary power supplyMountingThe d130 Auxiliary Relay Module attaches to amounting plate for easy mounting in any assembly can be mounted in the control panel'senclosure by means of supplied ConsiderationsThe d130 can connect directly to the FACP or canconnect through a D8129 OctoRelay Module . Refer tothe installation instructions for the FACP or the D8129for specific wiring includedQuantityComponent1D130 module1 Mounting plate1 Hardware pack1 Literature packTechnical in.
4 X in. (7 cm x cm)OutputsRating:10 mA at 5 VDC mimimum5 A at 30 VDC maximumType:Two non-latching Form CPower RequirementsCurrent:60 mA maximumVoltage (operating):12 VDC or 24 VDC nominalOrdering informationD130 Auxiliary Relay Module , 12/24 VDC12 VDC or 24 VDC Relay . Allows switching of current number D1302 | d130 Auxiliary Relay Module , 12/24 VDCR epresented by:Europe, Middle East, Africa:Germany:North America:Asia-Pacific:Bosch Security Systems Box 800025600 JB Eindhoven, The NetherlandsPhone: + 31 40 2577 Sicherheitssysteme GmbHRobert-Bosch-Ring 585630 Security Systems, Perinton ParkwayFairport, New York, 14450, USAP hone: +1 800 289 0096 Fax: +1 585 223 Bosch (SEA) Pte Ltd, Security Systems11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 Bosch Security Systems 2020 | Data subject to change without notice2537262859 | en, V8, 25.
5 Jun 2020
