DATASHEET SEARCH SITE | WWW.ALLDATASHEET

1 GNTESTING. ULTRA-SMALL PACKAGE. SLIM POLARIZED RELAY GN-RELAYS. FEATURES. Compact slim body saves space Due to highly efficient magnetic circuit de- Thanks to the small surface area of sign, leakage flux is reduced and changes mm mm .224 inch .417 inch and in electrical characteristics from compo- .224 .012..417 .012 low height of mm .354 inch, the pack- nents being mounted close-together are aging density can be increased to allow minimized. This all means a packaging .354 .012. for much smaller designs. density higher than ever before. Outstanding surge resistance. Nominal operating power: 140 mW. Surge withstand between open contacts: Outstanding vibration and shock re- 1,500 V 10 160 s (FCC part 68) sistance. Surge withstand between contacts and Functional shock resistance.

2 224 .012. coil: 2,500 V 2 10 s (Bellcore) 750 m/s2 {75G}..417 .012. The use of twin crossbar contacts en- Destructive shock resistance: .394 sures high contact reliability. 1,000 m/s2 {100G}. AgPd contact is used because of its good Functional vibration resistance: sulfide resistance. Adopting low-gas 10 to 55 Hz (at double amplitude of molding material. Coil assembly molding mm .130 inch). technology which avoids generating vola- Destructive vibration resistance: tile gas from coil. 10 to 55 Hz (at double amplitude of 5 mm mm inch Increased packaging density .197 inch). SPECIFICATIONS. Contact Characteristics Arrangement 2 Form C Initial insulation resistance*1 Min. 1,000M (at 500V DC). Initial contact resistance, max. Between open contacts 750 Vrms for 1min. 100 m Initial (By voltage drop 6 V DC 1A ) breakdown Between contact sets 1,000 Vrms for 1min.

3 Stationary: AgPd+Au clad voltage*2 Between contacts and coil 1,500 Vrms for 1min. Contact material Movable: AgPd Between open contacts Nominal switching capacity 1 A 30 V DC 1,500 V (FCC Part 68). Initial surge (10 160 s). (resistive load) A 125 V AC. voltage Between contacts and coil Max. switching power 2,500 V (Bellcore). 30 W, V A (2 10 s). Rating (resistive load). Max. 4 ms (Approx. 2 ms). Max. switching voltage 110 V DC, 125 V AC Operate time [Set time]*3 (at 20 C). [Max. 4 ms (Approx. 2 ms)]. Max. switching current 1A Release time (without diode) Max. 4 ms (Approx. 1 ms). Min. switching capacity 1 10 A 10 mV DC [Reset time]*3 (at 20 C) [Max. 4 ms (Approx. 2 ms)]. 140mW ( to 12 V DC) Temperature rise*4 (at 20 C) Max. 50 C. Nominal Single side stable 230mW (24 V DC) Functional*5 Min.

4 750 m/s2{75G]. operating Shock resistance power 100mW ( to 12 V DC) Destructive*6 Min. 1,000 m/s2{100G]. 1 coil latching 120mW (24 V DC). 10 to 55 Hz at double Mechanical (at 180 cpm) 5 107 Functional*7. amplitude of mm Expected 1 A 30 V DC Vibration resistance 105 10 to 55 Hz at double life (min. Electrical resistive Destructive amplitude of 5 mm operations) (at 20 cpm) A 125 V AC. 105 Conditions for opera- Ambient 40 C to 85 C. resistive tion, transport and temperature 2 40 F to 185 F. Remarks: storage*8. * Specifications will vary with foreign standards certification ratings. (Not freezing and con- *1 Measurement at same location as "Initial breakdown voltage" section. densing at low tem- Humidity 5 to 85% *2 Detection current: 10mA. perature). *3 Nominal voltage applied to the coil, excluding contact bounce time.}}

5 *4 By resistive method, nominal voltage applied to the coil; contact carrying current: Unit weight Approx. 1 oz 1 A. Notes: *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 s. 1 This value can change due to the switching frequency, environmental conditions, * Half-wave pulse of sine wave: 6 ms. 6. and desired reliability level, therefore it is recommended to check this with the *7 Detection time: 10 s. actual load. *8 Refer to 5. Conditions for operation, transport and storage mentioned in 2 The upper limit for the ambient temperature is the maximum temperature that AMBIENT ENVIRONMENT (Page 61) can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from 40 to +70 C 40 to +158 F. 125. GN. TYPICAL APPLICATIONS. Telephone exchange, transmission Home appliances, and audio/visual equipment equipment Communications devices Handheld and portable products Measurement devices ORDERING INFORMATION.

6 Ex. AGN 2 0 0 A 1 H Z. Contact arrangement Operating function Type of operation Terminal shape Coil voltage (DC) Packing style 2: 2 Form C 0: Single side stable 0: Standard type Nil: Standard PC board terminal 1H: 09 : 9V Nil: Tube packing 1: 1 coil latching ( ) A: Surface-mount terminal A type 03 : 3V 12 : 12V Z: Tape and reel packing S: Surface-mount terminal S type 4H: 24 : 24V (piked from 5/6/7/8. 06 : 6V pin side). Note: Tape and reel packing symbol -Z is not marked on the relay. X type tape and reel packing (picked from 1/2/3/4-pin side) is also available. Suffix X instead of Z . TYPES AND COIL DATA (at 20 C 68 F). (1) Standard PC board terminal Part No. Pick-up volt- Drop-out Nominal Nominal Max. allowable Operating Coil Rating, age, V DC voltage, operating Coil resistance, Standard PC operating voltage, Function V DC (max.)

7 V DC (min.) current, ( 10%). board terminal power, mW V DC. (initial) (initial) mA ( 10%). AGN2001H 16 140 AGN20003 3 140 AGN2004H 31 145 140 Single side AGN20006 6 257 140 9. stable AGN20009 9 579 140 AGN20012 12 9 1,028 140 18. AGN20024 24 18 2,504 230 Part No. Nominal Set voltage, Reset voltage, Nominal Max. allowable Operating Coil Rating, operating Coil resistance, Standard PC V DC (max.) V DC (max.) operating voltage, Function V DC current, ( 10%). board terminal (initial) (initial) power, mW V DC. mA ( 10%). AGN2101H 100 AGN21003 3 90 100 AGN2104H 100 1 coil latching AGN21006 6 360 100 9. AGN21009 9 810 100 AGN21012 12 9 9 1,440 100 18. AGN21024 24 18 18 4,800 120 36. 1) Standard packing: 50 pcs. in an inner package (tube); 1,000 pcs. in an outer package 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

8 (2) Surface-mount terminal Part No. Pick-up Drop-out Nominal Nominal Max. Coil Operating Coil Rating, voltage, voltage, operating operating allowable Tape and reel resistance, Function Tube packing V DC V DC (max.) V DC (min.) current, power, voltage, packing ( 10%). (initial) (initial) mA ( 10%) mW V DC. AGN200 1H AGN200 1HZ 16 140 AGN200 03 AGN200 03Z 3 140 AGN200 4H AGN200 4HZ 31 145 140 Single side AGN200 06 AGN200 06Z 6 257 140 9. stable AGN200 09 AGN200 09Z 9 579 140 AGN200 12 AGN200 12Z 12 9 1,028 140 18. AGN200 24 AGN200 24Z 24 18 2,504 230 : For each surface-mounted terminal variation, input the following letter. A type: A, S type: S. 1) Standard packing: 50 pcs.(tube), 500pcs. (tape and reel)in an inner package; 1,000 pcs. in an outer package 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

9 126. GN. Part No. Reset Nominal Nominal Max. Set voltage, Coil Operating Coil Rating, voltage, operating operating allowable Tape and reel V DC (max.) resistance, Function Tube packing V DC V DC (max.) current, power, voltage, packing (initial) ( 10%). (initial) mA ( 10%) mW V DC. AGN210 1H AGN210 1HZ 100 AGN210 03 AGN210 03Z 3 90 100 AGN210 4H AGN210 4HZ 100 1 coil AGN210 06 AGN210 06Z 6 360 100 9. latching AGN210 09 AGN210 09Z 9 810 100 AGN210 12 AGN210 12Z 12 9 9 1,440 100 18. AGN210 24 AGN210 24Z 24 18 18 4,800 120 36. : For each surface-mounted terminal variation, input the following letter. A type: A, S type: S. 1) Standard packing: 50 pcs.(tube), 500pcs. (tape and reel)in an inner package; 1,000 pcs. in an outer package 2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

10 DIMENSIONS mm inch 1. PC board terminal PC board pattern Schematic (Bottom view)..417 .012 .224 .012 Single side stable 1 coil latching .299 (Deenergized condition) (Reset condition)..126 1 2 3 4 1 2 3 4. ( ) .126. (.020) .354 .012..138 .012 8 7 6 5 8 7 6 5..016 .004 .010 .004 dia..087..087 .006 dia Direction indication Direction indication ( ) .126 .006. (.059) .126 .006 Tolerance: .004. 2. Surface-mount terminal Suggested mounting pad Schematic (Top view). Single side stable 1 coil latcing 1) A type .417 .012 .224 .012 (Deenergized condition) (Reset condition)..126 .087. ( ) 8 7 6 5 8 7 6 5. (.020) .354 .012 Max..122 .010 .004 .394..209. 1 2 3 4 1 2 3 4..016 .004 .126 .006 .087 .006 .031 Direction indication Direction indication ( ) (.059) .126 .006 .291 .012. Tolerance.