Dulux Professional Quick Dry Primer Surfacer …

1 Dulux Professional Quick Dry Primer Surfacer NZDD1532. Part A 361-97650. Description Dulux Professional Quick Dry Primer Surfacer is a premium alkyd based, non-inhibitive, Primer Surfacer with grain filling and sanding qualities. It can be used on interior or exterior surfaces as a Primer Surfacer for new or refurbishment work. All Dulux Professional products are designed to meet the application needs of painters. Features Grain filling Easy Sanding Blocks common stains Interior & exterior use Benefits Provides an even base for subsequent top coating. Reduces time & effort to produce a smooth surface Blocks stains from bleeding through and marring subsequent top coats. Multipurpose Uses Use Dulux Professional Quick Dry Primer Surfacer as a rapid dry interior or exterior Primer Surfacer over bare timber or previously painted areas.

2 This product has excellent sanding and filling properties delivering a superfine even finish suitable for top coating. Performance Guide Weather Recommended for both interior & exterior use. Heat Up to 100C. Prolonged exposure to 100C heat will cause Resistance embrittlement. Water Excellent resistance to condensation and water splash as Solvent Resistant to alcohol & hydrocarbons. Film is liable to attack part of system. from strong solvents. Abrasion Good when topcoated. Version of Dulux datasheet NZDD1532 approved on Thursday, 17 October 2013 12:25:41 AM (UTC) Page 1 of 3. Typical Properties Thinner Mineral Turpentine Colour White Components 1 Number Of Coats 1. Toxicity Lead free.

3 Dry film is non-toxic. Level 488 g/L. Meets GBCA No Sanding Properties Excellent VOC. Requirement? Touch Dry 1 Hour Clean Up Thinner Clean Up Clean all equipment with mineral turpentine. Description Application Method Air Spray Airless Spray Brush Roller Application Solids By Volume 39. Conditions Min Max Recommended Wet Film Per Coat (microns) 141 141 141. Dry Film Per Coat (microns) 55 55 55. Recoat Time (min) 16 Hr Indefinite Theoretical Spread Rate (m2/L) Application Guide Surface Ensure all surfaces are clean and dry prior to application. Brush down to remove dust. Stir well with a broad flat stirrer prior to application. Preparation Previously painted surfaces, must be sanded to remove loose, peeling, flaking or chalky paint.

4 Sand all gloss and semi gloss surfaces to a dull finish and wipe down with a damp cloth to remove surface dust. Spot prime bare areas. Application Brush, roller, or spray Procedure And Airless spray advice: Equipment Tip size: ". Pressure: 2200-2800. Stir thoroughly before and during use with a broad flat paddle using an upward lifting motion. Apply by brush, roller, or spray. Thin with up to 50mL of mineral turpentine per litre if necessary. Version of Dulux datasheet NZDD1532 approved on Thursday, 17 October 2013 12:25:41 AM (UTC) Page 2 of 3. Health And Safety MSDS 000000022310 Using Safety For detailed information refer to the product label and the Number Precautions current Material Safety Data Sheet available through Dulux NZ Sales and Customer Service offices.

5 MSDS Link Health Splashes to the eye will cause eye irritation. When Flammability This product is flammable. Effects spraying, inhalation of mists and vapours may produce respiratory irritation and with skin may cause irritation. Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice. Wash contaminated clothing before re-use. If exposed or concerned: Get medical advice. Personal Wear protective gloves/protective clothing/eye/face Fire Use foam, carbon dioxide or dry chemical powder. protection. Wash hands thoroughly after handling. Avoid Suppression breathing vapour, use with adequate ventilation. No smoking. Protective Wear eye protection and when spraying or applying to Storage Store in original container tightly closed in a cool place.

6 Equipment broadwall areas wear a respirator with a combined Avoid release to the environment. Keep away from vapour/ particulate cartridge. heat/sparks/ open flames/hot surfaces. Disposal Do not contaminate stormwater with product or product Handling Take precautionary measures against static discharge. washings. Do not pour product down the drain. Unwanted Ground/bond container and receiving equipment. Use product should be brushed out on newspaper, allowed to explosion-proof electrical/ ventilating/lighting equipment. dry and then disposed of via domestic waste collection. Use only non-sparking tools. Empty containers should be left open in a well ventilated area to dry out.

7 When dry, recycle the container via recycling programmes. Disposal of empty paint containers via recycling programmes may differ between local authorities. Check with your local council first. Other Collect spillage: Shut off ignition sources. Wear protective equipment. Absorb with sand or soil. Collect and seal in properly labelled drums or other suitable containers. In the case of emergency, please call 0800 734 607. Precautions And Limitations Do not apply if the surface temperature is below 10C or conditions indicate it will fall below 10C during the drying period. Transport And Storage Pack A 361-97650 Shipment PAINTS, flammable liquid, high flash point. Name Size Weight 4 Litre 10 Litre Kg Kg Flash Point 32C UN 1263.

8 Number Dangerous 3b Package III. Goods Group Class Disclaimer Dulux , Selleys and Other marks followed by are registered trademarks. Marks followed by the symbol of are trademarks. The data provided within the Duspec system is correct at the time of publication, however it is the responsibility of those using this information to check that it is current prior to specifying or using any of these coating/product systems. DISCLAIMER: Any advice, recommendation, information, assistance or service provided by any of the divisions of DuluxGroup (New Zealand) Pty Ltd or its related entities (collectively, DuluxGroup) in relation to goods manufactured by it or their use and application is given in good faith and is believed by DuluxGroup to be appropriate and reliable.

9 However, any advice, recommendation, information, assistance or service provided by DuluxGroup is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon DuluxGroup by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or prohibiting such exclusion limitation or modification. Coating/product systems can be expected to perform as indicated on the Duspec Spec Sheet so long as applications and application procedures of the individual products are followed as recommended on the appropriate Product data Sheet.

10 "DuluxGroup". " Dulux " "Selleys" "Berger" "Berger Gold Label" "Hadrian" "Walpamur" "Levene" "Acratex" and Other marks followed by are registered trademarks. Marks followed by the symbol are trademarks. Please note that this document is only valid for 60 days from the date of issue. DuluxGroup (New Zealand) Pty Ltd 150 Hutt Park Road NZ ACN 133 404 118. Version of Dulux datasheet NZDD1532 approved on Thursday, 17 October 2013 12:25:41 AM (UTC) Page 3 of 3.