HEAT TRANSFER SOLUTIONS - Exergy

1 HEATTRANSFER SOLUTIONSINDUSTRIESD elivering unsurpassed quality, designand is the leading global supplier of miniatureheat exchangers. For more than 30 years, wehave utilized state-of-the-art design and manu-facturing techniques to provide heat transfersolutions for a wide variety of applications range from a single unitfor research and development to productionquantities for OEM offers a comprehensive product line ofhighly efficient shell & Tube and Tube-in-Tubeheat exchangers constructed of 316 LSS,Hastelloy , Inconel and other alloys.

2 Manystandard models are available from stock or wecan create a custom design. Exergy s engineerswill evaluate your requirements and recommendthe optimal heat exchanger that meets yourspecifications, delivery and in Thousands of ApplicationsAerospace/DefenseAlternative Energy Chemical/IndustrialFood & BeverageFuel CellPharmaceutical/BiotechSolarSemicondu ctorExergy. The ideal choice for compact design and unequaled thermal miniature shell & tube heat exchangers providemaximum performance in a minimum package.

3 A unique compact arrangement of small diametertubes results in a lightweight, cost effective design thatis easily installed in space constrained Features: Large heat TRANSFER area in a small volume heat TRANSFER rates to 3,500,000 BTU/hr (1025 kW) Liquid flows to 160 GPM (605 LPM) Pressures up to 1,500 psi (104 bar)Design Features: 316L SS, Hastelloy , Inconel and other alloys Nickel brazed (no welds) NPT, tube stub, or custom fittings Mounting kits available Every unit pressure tested Maintenance freeTypical Applications: Processing equipment Condensing and evaporating Regenerative heat TRANSFER Process fluid temperature control Batch process cooling or heating Cryogenic cooling Sample coolingSeriesShell Diameterin(mm) TRANSFER Areaft2(m2)Pressure RatingTube Sidepsi(bar) shell Sidepsi(bar) (13).

4 05 to .17(.005 to .016)1,500(104)1,000(69) (25) to (.04 to .21)1,500(104)1,000(69) (38) to (.13 to .51)1,200(83)800(55) (57) to (.30 to )750(52)500(35) (76) to 0(.60 to )600(41)400(28) (102) to ( to )750(52)500(35) shell & tubes eriesShell Diameterin (mm) TRANSFER Areaft2(m2)Pressure Rating*Tube Sidepsi (bar) shell Sidepsi (bar) (19).14 to (.013 to .11)1,500 (104)1,000 (69) (38) to (.12 to .51)1,200 (83)800 (55) (64) to (.36 to )600 (41)400 (28) (76) to (.)

5 54 to )600 (41)400 (28) (102) to ( to )750(52)500(35) Exergy sanitary shell & tube heat exchangers aredesigned to meet the high quality requirements and hygienic standards of the pharmaceutical industry. All product contact surfaces have a maximum surface finish of 20 in ( m) Ra,and can be improved to 15 in ( m) Raor betterwith optional electropolishing. Available with singletubesheet or double tubesheet to eliminate risk ofcross-contamination between the product and working fluids.

6 Performance Features: heat TRANSFER rates to 3,500,000 BTU/hr (1025 kW) Liquid flows to 160 GPM (605 LPM) Pressures up to 1,500 psi (104 bar)Design Features: 316 LSS, Hastelloy , Inconel and other alloys Nickel brazed (no welds) Fully drainable on tube side ASME BPE sanitary fittings ASME BPE compliant Clean-in-place (CIP) Available with or without electropolish Material & process certifications included Available with single or double tubesheetTypical Applications: Point of use cooling or heating Water for Injection (WFI) Clean steam condensing and sub-cooling Temperature control of high purity product Product samplingSANITARY shell & TUBE*Pressure rating may be limited by sanitary flange clamp.

7 Refer to manufacturer s Features: 316L SS, Hastelloy , Inconel and other alloys NPT, tube stubs, or custom fittings Thick walled seamless tube Integrated threaded holes for mounting Highly resistant to thermal stress All welded construction Maintenance freeTypical Applications: High temperature, high pressure, low flow Multi-phase fluids & slurries High thermal stress Steam condensing Seal cooling Liquid/Gas Sampling WFITUBE-IN-TUBEE xergy tube-in-tube heat exchangers consist of two tubes , an inner and an outer coiled unique, compact design prevents thermalfatigue, increases efficiency and reduces the overallsize.

8 It is ideal for high temperature, high pressureand low flow Sanitary models are designed to meet the highquality requirements and hygienic standards of thepharmaceutical industry. All product contact surfaceshave a maximum surface finish of 20 in ( m) Ra,and can be improved to 15 in ( m) Ra or betterwith optional electropolishing. Our unique designensures there is no risk of cross-contaminationbetween the product and working Features: heat TRANSFER rates to 100,000 BTU/hr (29 kW) Liquid flows to 10 GPM (38 LPM) Pressures up to 4,500 psi (310 bar)Sanitary Features.

9 Available with or without electropolish No risk of cross-contamination between fluids Sanitary fittings ASME BPE Material & process certifications included Fully drainable on product side Clean-in-place (CIP) No dead spots or crevices ASME BPE CompliantOuter Tubein (mm)Inner Tubein (mm) TRANSFER Areaft2(m2)Pressure Rating*Inner Tubepsi(bar)Outer Tubepsi(bar) OD x .035 Wall( OD x .9 Wall).25 OD x .035 Wall( OD x .9 Wall) (.11)3100 (214)1500 (104) OD x .049 Wall( OD x Wall).

10 38 OD x .049 Wall( OD x Wall) (.16)2900 (200)1350 (93) OD x .065 Wall( OD x Wall).50 OD x .065 Wall( OD x Wall) (.24)2900 (200)1350 (93) OD x .065 Wall( OD x Wall).75 OD x .065 Wall( OD x Wall) (.34)1850 (128)1050 (72)*Pressure rating may be limited by sanitary flange clamp. Refer to manufacturer s Applications: Cool WFI/PW from 80-85 C to 20-40 C Water For Injection (WFI) systems Purified Water (PW) systemsExergy Point-Of-Use systems dispense instant, temperaturecontrolled WFI or PW, and are designed to meet the highquality requirements and hygienic standards of the pharma-ceutical industry.