INSTALLATION INSTRUCTIONS Louver Kit - Magic …

1 507837-01 Issue 1822 Page 1 of 2 Save these INSTRUCTIONS for future referenceINSTALLATION INSTRUCTIONSL ouver KitFor Use with MGE/MCE/MHP Series Magic -Pak UnitsManufactured ByAllied Air Enterprises LLCA Lennox International, Inc. Company215 Metropolitan DriveWest Columbia, SC 29170 This manual must be left with the homeowner for future reference. (P) 507837-01*P507837-01* WARNINGThe Magic -Pak unit must be installed with approved wall sleeve and grille accessories for safe operation. Improper installations could result in property damage, personal injury, or death. WARNINGA dequate safety precautions should be taken to protect personnel. Improper installations could result in property damage, personal injury, or and Packing ListQtyDescription1 Louver1 Mounting Hardware Packet1 INSTALLATION Instructions1 Gasket (Factory-installed for aluminum louvers) (Field-installed for plastic louvers)InstallationMagic-Pak louvers are designed for INSTALLATION on Magic -Pak Wall Sleeves.

2 In accordance with the 2014 Florida Building Code, it may be required to use specific fastening methods depending on the risk category and wind exposure classification of the project where the equipment is being installed. Please refer to our wind load certification documentation prescribing INSTALLATION and fastener requirements at : Louvers should be tethered during the INSTALLATION process to reduce the risk of SleeveAssemblyLouverDividerPanelGasket -Attached toV-ShapedLouver1. Remove cardboard template (if present) from wall sleeve Apply supplied gasket to the interior flat surface of the V-shaped dividing Louver (see figure above). Gasket must align with wall sleeve divider panel (or unit fan panel if using ASLEEVE-3) to form a seal between Louver and divider panel.

3 NOTE: Gasket is factory-applied to aluminum 1822 Page 2 of 2 Kit WithALVRPWHT-1 Polypropylene Louver Kit (White)MCE/MHP4-09-(12, 18, 24, 30) & MCE/MHP4-10-(18, 24)ALVRPWHT-2 Polypropylene Louver Kit (White)MCE/MHP4-09-(36) & MCE/MHP4-10-(30)ALVRPSAN-1 Polypropylene Louver Kit (Sandstone)MCE/MHP4-09-(12, 18, 24, 30) & MCE/MHP4-10-(18, 24)ALVRPSAN-2 Polypropylene Louver Kit (Sandstone)MCE/MHP4-09-(36) & MCE/MHP4-10-(30)ALVRPBGE-1 Polypropylene Louver Kit (Beige)MCE/MHP4-09-(12, 18, 24, 30) & MCE/MHP4-10-(18, 24)ALVRPBGE-2 Polypropylene Louver Kit (Beige)MCE/MHP4-09-(36) & MCE/MHP4-10-(30)ALVRPTPST-1 Polypropylene Louver Kit (Toupestone)MCE/MHP4-09-(12, 18, 24, 30) & MCE/MHP4-10-(18, 24)ALVRPTPST-2 Polypropylene Louver Kit (Toupestone)

4 MCE/MHP4-09-(36) & MCE/MHP4-10-(30)ALVRPWHTMGE-1 Polypropylene Louver Kit (White)MGE4-09-(12, 18, 24, 30) & MGE4-10-(18, 24)ALVRPWHTMGE-2 Polypropylene Louver Kit (White)MGE4-09-(36) & MGE4-10-(30)ALVRPSANMGE-1 Polypropylene Louver Kit (Sandstone)MGE4-09-(12, 18, 24, 30) & MGE4-10-(18, 24)ALVRPSANMGE-2 Polypropylene Louver Kit (Sandstone)MGE4-09-(36) & MGE4-10-(30)ALVRPBGEMGE-1 Polypropylene Louver Kit (Beige)MGE4-09-(12, 18, 24, 30) & MGE4-10-(18, 24)ALVRPBGEMGE-2 Polypropylene Louver Kit (Beige)MGE4-09-(36) & MGE4-10-(30)ALVRPTPSTMGE-1 Polypropylene Louver Kit (Toupestone)MGE4-09-(12, 18, 24, 30) & MGE4-10-(18, 24)ALVRPTPSTMGE-2 Polypropylene Louver Kit (Toupestone)MGE4-09-(36) & MGE4-10-(30)ALVRAL-1 Extruded Aluminum Louver KitMCE/MGE/MHP4-09-(12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRAL-1 PExtruded Aluminum Louver Kit (Custom Color*)MCE/MGE/MHP4-09-(12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRAL-2 Extruded Aluminum Louver Kit MCE/MGE/MHP4-09-(36) & MCE/MGE/MHP4-10-(30)ALVRAL-2 PExtruded Aluminum Louver Kit (Custom Color*)MCE/MGE/MHP4-09-(36) & MCE/MGE/MHP4-10-(30)ALVRAL-3 Extruded Aluminum Louver Kit (45 Height)MCE/MGE/MHP4-09-(12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRAL-3 PExtruded Aluminum Louver Kit (45 Height / Custom Color*)MCE/MGE/MHP4-09-(12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRAL-4 Extruded Aluminum Louver Kit (45 Height)MCE/MGE/MHP4-09-(36) & MCE/MGE/MHP4-10-(30)

5 ALVRAL-4 PExtruded Aluminum Louver Kit (45 Height / Custom Color*)MCE/MGE/MHP4-09-(36) & MCE/MGE/MHP4-10-(30)ALVRAL-5 Extruded Aluminum Louver Kit (50 Height)MCE/MGE/MHP4-09-(12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRAL-5 PExtruded Aluminum Louver Kit (50 Height / Custom Color*)MCE/MGE/MHP4-09-(12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRAL-6 Extruded Aluminum Louver Kit (50 Height)MCE/MGE/MHP4-09-(36) & MCE/MGE/MHP4-10-(30)ALVRAL-6 PExtruded Aluminum Louver Kit (50 Height / Custom Color*)MCE/MGE/MHP4-09-(36) & MCE/MGE/MHP4-10-(30)ALVRALC-1 Extruded Aluminum Louver Kit (Impact-Rated) Miami-Dade NOA# (12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRALC-1 PExtruded Aluminum Louver Kit (Impact-Rated / Custom Color*) Miami-Dade NOA# (12, 18, 24, 30) & MCE/MGE/MHP4-10-(18, 24)ALVRALC-2 Extruded Aluminum Louver Kit (Impact-Rated) Miami-Dade NOA# (36) & MCE/MGE/MHP-10-(30)ALVRALC-2 PExtruded Aluminum Louver Kit (Impact-Rated / Custom Color*) Miami-Dade NOA# (36) & MCE/MGE/MHP-10-(30)* Customer-specified colorTable 1.

6 Available Louver Kits3. Install fasteners into the Louver s two upper and two lower mounting holes. Do not seat fasteners completely (leave approximately 1/8 to 1/4 gap for fitment in step 4).4. Guide Louver through wall sleeve opening and insert fasteners into upper and lower key holes of the wall Install two middle Tighten all fasteners to secure Louver to wall : If additional sealing between wall sleeve and Louver is desired, it is important to only caulk the left, right, and top sides. A gap between the bottom of the Louver and the wall sleeve is required to allow proper rain water drainage.